I have tried everything i can think of.. Have even formatted the computer. Here is the Log Admin Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=5, 0, 0, 1, size=22528 bytes, created 3/17/2001 9:34:12 PM ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM Nero Version: 6.6.0.6 Recorder: <SONY DVD RW DW-D26A> Version: JYS2 - HA 0 TA 1 - 6.6.0.6 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD-ROM DDU1613 >Version: 9YS2 - HA 0 TA 0 - 6.6.0.6 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : SONY DVD-ROM DDU1613 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-D26A atapi Port 0 ID 1 DMA: On DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 6Y160M0 atapi Port 2 ID 0 DMA: On === CDRom-Device-Map === SONY DVD-ROM DDU1613 G: CDRom0 SONY DVD RW DW-D26A H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1046956kB) Free physical memory: 563MB (576936kB) Memory in use : 44 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.9.2006 DVD-Copy on the fly 4:19:47 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 4:19:47 PM #2 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DW-D26A running 4:19:47 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x04 Start 0 Len 2183104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 4:19:47 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2183104 = 2183104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 4:19:47 PM #5 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 4:19:47 PM #6 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2183103 (485:08.03, 4263MB) 4:19:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 4:19:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: SONY DVD RW DW-D26A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 4:19:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:19:47 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2183104 (2183104) = #2183104/485:8.4 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2183104 blocks [SONY DVD RW DW-D26A] -------------------------------------------------------------- 4:19:47 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [SONY DVD RW DW-D26A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4470996992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2183104 | lead-out | 1 | 0x41 | 0x00 4:19:47 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (22,160 KB/s) 4:19:47 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:19:47 PM #14 Text 0 File DVDR.cpp, Line 2300 Recording mode: Sequential Recording Mode 4:19:47 PM #15 Text 0 File Mmc.cpp, Line 21079 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 4:19:47 PM #16 Text 0 File DVDR.cpp, Line 2441 Start write address at LBA 0 DVD high compatibility mode: Yes 4:19:47 PM #17 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 4:19:47 PM #18 Text 0 File DVDR.cpp, Line 5350 Drive: SONY DVD RW DW-D26A Book Type request [LO]: DVD-ROM Book Type setting not supported for the loaded disc type 4:21:02 PM #19 Text 0 File Cdrdrv.cpp, Line 1284 16:21:02.078 - SONY DVD RW DW-D26A\H0 T1 : Queue again later 4:23:14 PM #20 SCSI -1046 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03CD0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x15 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 4:23:14 PM #21 CDR -1046 File Writer.cpp, Line 311 Illegal disc 4:23:14 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:23:14 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 4:23:17 PM #24 Text 0 File DVDR.cpp, Line 2682 EndDAO: Last written address was 5599 4:23:17 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 1/19/2006 12:05:36 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 8:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi diser Looks like your biggest problem here is the 16x media you are using: Disc Manufacturer: CMC MA - G. AM3 Not the best and this drive hasn't had much support- firmware wise on it. Better to use would be Verbatim or made in Japan only Sony, Fuji or Maxell. Burn process failed at 16x Take the burn speed down to 8x or less on these. Nero Version: 6.6.0.6 Update Nero to 6.6.0. 18 too. Here's some links: Package 1 http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 (recode & vision) http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Give that a go & let us know!
Thanks for the reply.. I should have mentioned that before i formatted I tried setting it as low as 4x.. that didnt help any. I did update the firmware for the sony drive.. and i was originally getting this error on sony dvds.. I was originally using nero 7 but when i formatted the computer i put 6 back on here instead.. I will try downloading the update and see if that helps. Thanks
Not a lot of support on this Sony burner - last update was over a year ago so 16x media even though it's a 16x burner may give it problems. The burner is an oem LiteOn - 1673S so if your interested you may want to look into crossflashing it to LiteOn firmware. Little riskier and will void any warranty if still under one. Whyat was the rated speed of the media you were able to burn successfully?
I am still trying to use the same 2 types of dvds that i always have.. Memorex and Sony. Both worked before. Then all of a sudden i couldnt burn anymore. Same thing happens if i use any other software.. except alcohol.. If i use nero to make an image then burn it with alcohol it will burn.. takes forever but it does burn. I just installed that update so im gonna try to burn something. Btw.. i did switch to the liteon firmware at one point and that didnt fix the problem. so i changed it back. Thanks Sorry.. all media is 16x media.
Ok - memerox uses a few manufacturers for the media. 16x can be made by CMC, Ritek and maybe another. Sony is usually made by Sony or Taiyo Yuden. Another good burning program (free) you may want to try is ImgBurn - burns iso's and you can use the build mode for video_ts, data etc. ImgBurn
