I have Nero 7.2.3.2b installed and have had no problems with it (have burned about 7 dvds so far) but I tried to put 7 episdoes of Robot Chicken on a disc, and burned it. When I played my dvd though the audio sync was WAY off...like 5 or 6 seconds off, on every episode. I really dont know why because when I open the Robot Chicken files with windows media player (for example) it plays perfectly. Also when you get to the preview screen right before the final burn screen and try to play them the audio is off as well. Any ideas?
This seems to be one of the inherent problems in converting AVI/DivX to DVD. Two things: Post the NeroHistory log section for the burn. It's located in this path and be sure to delete the serial number before posting: Program Files > Nero > Nero7 > Core > NeroHistory There are other programs and sometimes just using another program solves the problem; Among the others are the following: VSO's ConvertXtoDVD: http://www.vso-software.fr/products/convert_x_to_dvd/ DVD Copy 4 Platinum: http://www.intervideo.com/jsp/InterVideoDVDCopy_Profile.jsp TMPGEnc Express 3: http://tmpgenc.pegasys-inc.com/en/product/te3xp.html DVD Santa: http://www.dvdsanta.com/ The Film Machine: http://members.home.nl/thefilmmachine/ All are free or have free trials. DVD Santa and ConvertX watermark their trial program output however.
Okay here goes (think I deleted all my serial numbers) The log is below. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 1:06:00 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.3.2 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 3, 2 Recorder: <SONY DVD RW DRU-810A> Version: 1.0e - HA 1 TA 1 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 SONY DVD RW DRU-810A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 767MB (785412kB) Free physical memory: 102MB (105372kB) Memory in use : 86 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.6.2006 NeroAPI 1:25:58 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 1:25:58 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 1:25:58 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 1:25:58 AM #4 Text 0 File Writer.cpp, Line 113 Writer E: SONY DVD RW DRU-810A running 1:25:58 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:25:58 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:25:58 AM #7 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 1:25:59 AM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2143231 (476:16.31, 4185MB) 1:25:59 AM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:25:59 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: SONY DVD RW DRU-810A, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 1:25:59 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:25:59 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2143232 (2143232) = #2143232/476:16.32 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143232 blocks [E: SONY DVD RW DRU-810A] -------------------------------------------------------------- 1:25:59 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: SONY DVD RW DRU-810A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4389339136, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2143232 | lead-out | 1 | 0x41 | 0x00 1:25:59 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 1:25:59 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:25:59 AM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 1:25:59 AM #17 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 1:25:59 AM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 1:25:59 AM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 1:25:59 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:25:59 AM #21 Text 0 File DVDR.cpp, Line 2869 Recording mode: Sequential Recording Mode 1:25:59 AM #22 Text 0 File DVDR.cpp, Line 3025 Start write address at LBA 0 DVD high compatibility mode: Yes 1:25:59 AM #23 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:36:20 AM #24 Text 0 File WriterStatus.cpp, Line 116 <E: SONY DVD RW DRU-810A> start writing Lead-Out at LBA 2143232 (20B400h), length 0 blocks 1:36:20 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:36:20 AM #26 Text 0 File DVDR.cpp, Line 3265 EndDAO: Last written address was 2143231 1:36:50 AM #27 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 1:06:00 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/15/2003 12:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 3/21/2005 7:25:57 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=45056 bytes, created 9/10/1999 1:06:00 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=?.?.?.?, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.3.2 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 3, 2 Recorder: <SONY DVD RW DRU-810A> Version: 1.0e - HA 1 TA 1 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 SONY DVD RW DRU-810A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 767MB (785412kB) Free physical memory: 73MB (75364kB) Memory in use : 90 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.6.2006 NeroAPI 10:27:29 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 10:27:29 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 10:27:29 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 10:27:29 AM #4 Text 0 File Writer.cpp, Line 113 Writer E: SONY DVD RW DRU-810A running 10:27:29 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:27:29 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:27:29 AM #7 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 11:46:38 AM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2095855 (465:44.55, 4093MB) 11:46:38 AM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 11:46:38 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: SONY DVD RW DRU-810A, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 11:46:38 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD R DL.) 11:46:38 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2095856 (2095856) = #2095856/465:44.56 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2095856 blocks [E: SONY DVD RW DRU-810A] -------------------------------------------------------------- 11:46:38 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: SONY DVD RW DRU-810A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4292313088, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2095856 | lead-out | 1 | 0x41 | 0x00 11:46:38 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:46:38 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:46:38 AM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 11:46:38 AM #17 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 11:46:38 AM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 11:46:38 AM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 11:46:38 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:46:38 AM #21 Text 0 File DVDR.cpp, Line 2869 Recording mode: Sequential Recording Mode 11:46:38 AM #22 Text 0 File DVDR.cpp, Line 3025 Start write address at LBA 0 DVD high compatibility mode: Yes 11:46:38 AM #23 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:56:18 AM #24 Text 0 File WriterStatus.cpp, Line 116 <E: SONY DVD RW DRU-810A> start writing Lead-Out at LBA 2095856 (1FFAF0h), length 0 blocks 11:56:18 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:56:18 AM #26 Text 0 File DVDR.cpp, Line 3265 EndDAO: Last written address was 2095855 11:56:46 AM #27 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=?.?.?.?, size=101888 bytes, created 8/17/2001 3:07:32 PM File 'Drivers\ASPI32.SYS': Ver=?.?.?.?, size=25244 bytes, created 9/10/1999 1:06:00 PM File 'WNASPINT.DLL': Ver=?.?.?.?, size=57344 bytes, created 2/15/2003 12:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=?.?.?.?, size=20576 bytes, created 3/21/2005 7:25:57 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=45056 bytes, created 9/10/1999 1:06:00 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=?.?.?.?, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.3.2 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 3, 2 Recorder: <SONY DVD RW DRU-810A> Version: 1.0e - HA 1 TA 1 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 SONY DVD RW DRU-810A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 767MB (785412kB) Free physical memory: 127MB (130356kB) Memory in use : 83 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.6.2006 NeroAPI 3:13:45 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 3:13:46 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 3:13:46 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 3:13:46 PM #4 Text 0 File Writer.cpp, Line 113 Writer E: SONY DVD RW DRU-810A running 3:13:46 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:13:46 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:13:46 PM #7 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 3:13:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2052287 (456:03.62, 4008MB) 3:13:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 3:13:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: SONY DVD RW DRU-810A, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 3:13:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:13:47 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2052288 (2052288) = #2052288/456:3.63 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2052288 blocks [E: SONY DVD RW DRU-810A] -------------------------------------------------------------- 3:13:47 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: SONY DVD RW DRU-810A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4203085824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2052288 | lead-out | 1 | 0x41 | 0x00 3:13:47 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:13:47 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:13:47 PM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 3:13:47 PM #17 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 3:13:47 PM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 3:13:47 PM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 3:13:47 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:13:47 PM #21 Text 0 File DVDR.cpp, Line 2869 Recording mode: Sequential Recording Mode 3:13:47 PM #22 Text 0 File DVDR.cpp, Line 3025 Start write address at LBA 0 DVD high compatibility mode: Yes 3:13:47 PM #23 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:30:15 PM #24 Text 0 File WriterStatus.cpp, Line 116 <E: SONY DVD RW DRU-810A> start writing Lead-Out at LBA 2052288 (1F50C0h), length 0 blocks 3:30:16 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:30:16 PM #26 Text 0 File DVDR.cpp, Line 3265 EndDAO: Last written address was 2052287 3:30:43 PM #27 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=?.?.?.?, size=101888 bytes, created 8/17/2001 3:07:32 PM File 'Drivers\ASPI32.SYS': Ver=?.?.?.?, size=25244 bytes, created 9/10/1999 1:06:00 PM File 'WNASPINT.DLL': Ver=?.?.?.?, size=57344 bytes, created 2/15/2003 12:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=?.?.?.?, size=20576 bytes, created 3/21/2005 7:25:57 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 1:06:00 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.3.2 Internal Version: 7, 2, 3, 2 Recorder: <SONY DVD RW DRU-810A> Version: 1.0e - HA 1 TA 1 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHG - HA 1 TA 0 - 7.2.3.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 SONY DVD RW DRU-810A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 767MB (785412kB) Free physical memory: 353MB (362040kB) Memory in use : 53 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.6.2006 UDF/ISO compilation 4:52:25 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation started 4:52:26 PM #2 DVDREALLOC -22 File DVDVideoCompilation.cpp, Line 1217 File 'VTS_02_0.VOB' is not referenced and should not be present 4:52:26 PM #3 Phase 115 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation failed 4:52:36 PM #4 Phase 132 File dlgbrnst.cpp, Line 1730 DVD-Video files compliance ignored 4:52:36 PM #5 Text 0 File Isodoc.cpp, Line 6427 UDF document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:52:36 PM #6 Phase 111 File dlgbrnst.cpp, Line 1730 DVD-Video files sorted 4:52:36 PM #7 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 4:52:36 PM #8 Text 0 File Reader.cpp, Line 124 Reader running 4:52:36 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 4:52:36 PM #10 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 4:52:36 PM #11 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 4:55:03 PM #12 Phase 40 File dlgbrnst.cpp, Line 1730 Aborted by user 4:55:03 PM #13 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 4:55:03 PM #14 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: SONY DVD RW DRU-810A Medium not present 4:55:03 PM #15 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc not empty. Insert empty disc. (Medium in drive: DVD+R DL. Medium required by compilation: DVD R/RW, DVD R DL.) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 1:06:00 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/15/2003 12:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 3/21/2005 7:25:57 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=45056 bytes, created 9/10/1999 1:06:00 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=?.?.?.?, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.3.2 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 3, 2 Recorder: <SONY DVD RW DRU-810A> Version: 1.0e - HA 1 TA 1 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 SONY DVD RW DRU-810A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 767MB (785412kB) Free physical memory: 170MB (175032kB) Memory in use : 77 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.7.2006 NeroAPI 1:04:42 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 1:04:42 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 1:04:42 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 1:04:42 AM #4 Text 0 File Writer.cpp, Line 113 Writer E: SONY DVD RW DRU-810A running 1:04:42 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:04:42 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:04:42 AM #7 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 1:04:43 AM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2273695 (505:15.70, 4440MB) 1:04:43 AM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:04:43 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: SONY DVD RW DRU-810A, Media type: DVD+R 1:04:43 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:04:43 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2273696 (2273696) = #2273696/505:15.71 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2273696 blocks [E: SONY DVD RW DRU-810A] -------------------------------------------------------------- 1:04:43 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: SONY DVD RW DRU-810A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4656529408, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2273696 | lead-out | 1 | 0x41 | 0x00 1:04:43 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 1:04:43 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:04:43 AM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 1:04:43 AM #17 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 1:04:43 AM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 1:04:43 AM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 1:04:43 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:04:43 AM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 291 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x05c2a200: Len x804 1:04:43 AM #22 Text 0 File DVDR.cpp, Line 6736 Drive: SONY DVD RW DRU-810A Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 1:04:43 AM #23 CDR -1207 File DVDR.cpp, Line 5871 Book Type automatically set to: DVD-ROM 1:04:43 AM #24 Text 0 File DVDPlusRW.cpp, Line 650 Start write address at LBA 0 DVD high compatibility mode: Yes 1:35:09 AM #25 Text 0 File WriterStatus.cpp, Line 116 <E: SONY DVD RW DRU-810A> start writing Lead-Out at LBA 2273696 (22B1A0h), length 0 blocks 1:35:09 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:35:31 AM #27 Text 0 File DVDR.cpp, Line 6736 Drive: SONY DVD RW DRU-810A Book Type request [gen]: DVD+R, write to EEPROM Changing the Book Type was finished successfully, return code 0 1:35:31 AM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=?.?.?.?, size=101888 bytes, created 8/17/2001 3:07:32 PM File 'Drivers\ASPI32.SYS': Ver=?.?.?.?, size=25244 bytes, created 9/10/1999 1:06:00 PM File 'WNASPINT.DLL': Ver=?.?.?.?, size=57344 bytes, created 2/15/2003 12:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=?.?.?.?, size=20576 bytes, created 3/21/2005 7:25:57 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
I don't see anything glaringly out of place in the log. The firmware is up to date and Ritek media is fairly decent. My burners aren't as happy with Ritek as some other manufacturers' media though. Here are some suggestions: - Try burning at 4X instead of 8X. - Try a different brand of media like Verbatim. - Instead of burning with Nero, have Nero output an ISO image file and burn that with DVD Decrypter or ImgBurn at 4X. A slower speed sometimes provides a better quality burn. - Some have better luck using Nero version 7.0.8.2. It can be downloaded here: http://www.filehippo.com/download_nero_7_premium/?845 - Try one of the other conversion programs listed above.
But see it CANT be a problem with the burn speed because its happening before that. You see even when I open the Robot Chicken videos with Nero Showtime just to watch them the audio is already off. Same when I open them with the "create chapters" button..already 4 or 5 seconds off. However when I open them with divx, or Windows Media Player the audio is perfectly synched. Thats why I know its a Nero problem. I dont think its simply because these are television shows either (as was suggested in another thread) because I burned 5 discs of the old Dungeons and Dragons episodes with NO prob. I guess I just may have to find another program but you know, NERO just really burns me up! I pay for a program, it does NOT work, and 4 updates later it STILL wont work. Nero needs to start giving partial refunds or something at this point. Selling malfunctioning software is borderline fraud in my opinion.
Definitely try one of the other programs. I'd start with ConvertX or DVDSanta first. ConvertX is very popular around these parts.
I guess you noticed the DMA on the Burner went from on to off. I suppose that happened because there was a communication problem with the Burner and Windows changed it, unless you did. Have you tried making the Burner master and the DVD-ROM slave?
This last part of the log concerns me, none of the drivers are being recognized. So that I could comment on 7.2.3.2b, I tried it to burn 3 AVI flies which I had successfully burned using version 7.0.8.2, sadly each burn was unsatisfactory so I reverted to 7.0.8.2, tried them again with success…my conclusion..7.2.3.2b was a failure when it comes to burn AVI files. I did the following, uninstalled 7.2.3.2b, ran this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then installed 7.0.8.2 from here http://www.filehippo.com/download_nero_7_premium/?845
Audio Sync seems to be the #1 problem with all AVI to DVD convertions, There is a pattern to look for. (1) if the a/v sync is out from beginning to end...from the first frame to last....Dollars to Donuts it's due to framerate conversion! and this is the easier problem to fix. (2) if it starts in sync then goes out of sync...you've had a glitch somewhere in the file..a dropped frame or two( this is probably the case) you can use VirtualDub to fix this. If 1. is the case First use GSpot and examine the codecs used in the original file and the framerate of that file you can determine if you're dealing with a file which Nero had to convert framerate on( Nero isn't the most advanced MPEG encoder on the block but it has an Mpeg encoder built in(has to otherwise you couldn't go from AVI to .VOB, if the .avi file needed 2:3 pulldown or other advanced techniques..I believe that's where Nero drops the ball, Now back to the fix :then Demux with VirtualDubMod...then use BeSweet on the audio file...then Use a better authoring program like TMPG. Yes, it's alot of work but You'll be 1000 times happier and prouder..that You Made that DVD and fixed that problem!
Sounds very complicated buy I WILL give it a try (like you I love that feeling too when you overcome a hard problem rather than giving up), plus you learn a lot in the process. Thanks for the advice
@myrothe ConvertXtoDVD will correct your audio sync problems. Here's a link to the program: http://www.vso-software.fr/products/convert_x_to_dvd/ The demo version will put a watermark on the output, but you'll at least be able to see if it works for you before you commit to it. Good Luck!
