Azureus Help!!! Nat Error

Anyone else in the same boat?

I have tried everything - disabled windows firewall, established a fixed ip address from my computer on my home network, forwarded a range of ports using my router's virtual server, forwarded the same ports through ZoneAlarm - but still no green faces and still portprobe says that the entire range of ports i have tried to forward are all set to stealth. I mean, how hard can it be?!!! I've done everything but with no joy.

My flatmate on the same network has green faces all the time but we used the same technique on both computers, it really doesn't seem to make sense.

Another thing - why all this trouble with Azureus when Kazaa just sorts it all out itself? Whay doesn't Azureus use the same technology?

Any help you could give would be really appreciated.

 

i tried the portforward website but i got quite far but when it tels me to write in my ipaddress in explorer it comes up with page not found...i have tried this both on my broadband browser and internet explorer...
i really dont understand please some1 support a blonde and help!!1

 

ryt i sorted out my ip address(static) and forwarded my ports....i have followed the posts that were suggested last time but still i do not get green smiliys..i have rebooted my computer and tried different ports as well but i still get NAT error!!!!!!
and my download speed never goes over 5 kb/s
some one please explain to me in v. easy terms..because i am rubbish with the damn computers...someone help me!!!!!!

 

I used this thread in solving my NAT error and it was really helpful. Make sure that you read through the entire thread and don't skip steps.

One specific thing for my configuration that wasn't covered here was the configuration of my modem, which is the Siemens SpeedStream 4200 PPPoE Modem Router. In the configuration utility there is a page titled NAT/NAPT configuration. My service provider (CaribSurf) autoconfigured the modem to be 'NAPT Only Enabled', but in order to get my NAT problems solved I needed to check 'NAT Only Enabled' and put in my static IP address there as well.

After I did this (as well as many of the other steps in this thread) I had all green faces in Azureus. Hope this helps someone out.

 

Hello Guys..

I have a NAT error with Azureus. Here's my background...

I am connected to the Internet via a standalone USB ADSL modem. The modem is not the one with a built in router, its just a modem.

I have uninstalled all my firewall and even disabled my XP firewall.

I am still unable to connect....

Any suggestions anyone?

 

weird...i thought NATs were through the router...

i need help as well. i know how to reconfigure my router and foward my ports. but whenever i do it, after several hours, the router will screw. i still have connection to the router, but the router is not connected to internet. i cant connect to the internet or download, only log in to my router. i am using a Netgear router, does anyone know whats wrong?

 

netgear dg834?

I have that one, never had a single problem with it
you can enable Upnp in the router for an easier connection(Azureus also has this setting).

Bassically upnp allows enabled programs to connect on any port, however I wouldn't recommend that, I have Upnp disabled on all devices/software and my azureus works fine..

Also make sure that your computers internal ip address set to automatic and reserve ips for specific computers(mac addresses/Hostname) so that doesn't confuse the issue.

http://www.portforward.com

VERY useful site on how to setup your router AND programs(inc Azureus)

 

http://www.portforward.com/default.htm

 

Guyz~~~~~~!!!!

I finally fix my NAT error but it still has the same problem

1.Slow download speed although the torrent is a good one
2.When i open my azureus the following error occur "UpnP.Mapping 'UDP tracker client port (UDP/48***)failed . and 'Incoming Peer Data Port (TCP/48***)' failed

3.When i leave my azureus to download , the internet become dicconected and all the download stops.

Plz help mee~~~~

 

ok for some reason azereus has started giving me a nat firewalled error. it was working fine then i update windows xp home to pro and now it won't get rid of the error.

 

Hi all, i know some will feel this question a bit bored now but i really needed your help...


Problem : (Same old NAT, DHT errors)
(Slow D/l speed. 10Kb/s fastest)


BT system : Azureus 2.4.0.2
OS : WinXP home SP2

FireWall : ZoneAlarmPro (Opened port)
: Windows Firewall (Off)

AntiVirus : Norton AntiVirus (2003)

Reuter : Linksys WRT54G V2.2 (upgraded Firmware)
(Port Forwarded)

Modem : Linksys ADSL2MUE

Wireless : Linksys WUSB54G V4 (Upgraded driver)

Distance : about 3 meters from access point

Other info: (Channel 11)
(Using ports 35353 / 55555)
(Using Static IP address)
(ISP checked no problem with line)


i hope these enough to see where the problem lies...
Plz help me! its been like this for more than half a year and i'm really reaching my limits...

 

foward ur ports!!! half a year and theres a sticky here too... http://forums.afterdawn.com/thread_view.cfm/73686

 

the port is forwarded...

 

Ok I really got problems with my Azu, the thing is my NAT smiley does not even have a collor, not green not red just nothing!
I've read tons of ppl with the same prop and i tryed just about everything.

Im running on WinXP, WinXP Firewall, and netgear router.

This is what ive tryed so far:
1: tryed port 48298
and port 53000 that i got from this treat

2: I've addet both as TCP and UDP in my internet konfig.

After that I still had no luck, so at this point I desided to drop the Router, so now im running dicectly from my modem, but the problem is the same...

Please help!

 

Hey guys, been reading through this thread for a bit now and I have tried everything!

Im direct connected with no routers involved and I have tried turning off my firewall, all to no avail.

What I am wondering is: could my ISP have something in place that would directly affect my NAT??? The reason I am wondering this is I have had problems with my NAT before with Xbox Live.

Does anyone know of anything an ISP might do that would affect NAT?

 

YES... It could be your ISP. I had the same problem and it took a couple weeks to track down the problem and my ISP had me behind a Transparent NAT. Ask them if your are NAT firewalled, if so ask them if you can purchase a Public IP. That solved my problem 100%. Some ISP's won't tell you, they don't want you doing p2p. When I was on Wireless DSL they throttled back my connection and stuck me behind a NAT firewall. I am paying more for open access and use port numbers in the 50000 range. Get out of the 6000 range, it's not good to use those.

1. Ask ISP if your behind a NAT, if so...
2. Ask if you can get a Public IP.
3. If you can then you want to set up Static IP's behind your Public IP for security.

Good luck!

 

hey im looking for some help here. (NOT THE USUAL NAT ERROR STUFF!)
ive sorted all the NAT errors and port forwarding issues on Azureus which i figured out pretty easily and now have some happy green faces ...im confused though as im getting download/upload speeds of about 5kb/s on torrents which have around 400 seeders?? Ive tried UPnP being on and off with no difference o_0...

Please help!

 

wow 4get Azureus so much stupid stuff on it and confusing just get bittornado its easy to use

 

I have Norton Antivirus 2006 and Azureus, but I always get yellow smilies. I have gone into Norton and allowed my port TCP and UDP. I am so lost. Also, could someone fill me in on where I could find my router? I use my personal motorola surfboard modem for broadband on a Dell Dimension 5150 that has 3 GB ram.
edit: I have enabled UPnP

 

is router is compulsory to change this NAT things?...im suing 512/128 connection but i dont have the router, but when i open up the 192.168.1.1 test, it says my ip address is 192.168.1.3 which i believe im under router. currently im using aztech DSL600E modem and i really want to use this NAT. please help me.