Hello, i have burnt 4 previous backups using the exact same setup with no probs. But when i try to burn fifa street 2 using dvd decrypter or nero it starts ok but a short way through stops and says how its failed to reconize the device. I use quality media (verbatim) and have varied the burn speed, with no luck. Here is the log for nero's attempt: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <BENQ DVD LS DW1655> Version: BCHB - HA 1 TA 2 - 7.2.0.3 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 1 - 7.2.0.3 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 0 ID 0 DMA: On DiskPeripheral : FUJITSU MHT2040AH atapi Port 1 ID 0 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4243N D: CDRom0 AXV CD/DVD-ROM F: CDRom1 BENQ DVD LS DW1655 G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 510MB (522580kB) Free physical memory: 190MB (194848kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.7.2006 Burn DVD Image 17:05:21 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 17:05:21 #2 Text 0 File Reader.cpp, Line 124 Reader running 17:05:21 #3 Text 0 File Writer.cpp, Line 113 Writer G: BENQ DVD LS DW1655 running 17:05:21 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 17:05:21 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2294453 (509:52.53, 4481MB) 17:05:21 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 17:05:21 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: BENQ DVD LS DW1655, Media type: DVD+R 17:05:21 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:05:21 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2294454 (2294454) = #2294454/509:52.54 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294454 blocks [G: BENQ DVD LS DW1655] -------------------------------------------------------------- 17:05:21 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [G: BENQ DVD LS DW1655] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4699041792, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2294454 | lead-out | 1 | 0x41 | 0x00 17:05:21 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 17:05:21 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 17:05:21 #13 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 17:05:21 #14 Text 0 File Burncd.cpp, Line 4199 Cache writing successful. 17:05:21 #15 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 17:05:21 #16 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 17:05:21 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 17:05:21 #18 SPTI -1066 File SCSIPassThrough.cpp, Line 290 G: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x053cb600: Len x804 17:05:22 #19 CDR -1207 File DVDR.cpp, Line 5676 Book Type automatically set to: Current recorder setting 17:05:22 #20 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 17:05:49 #21 SPTI -600 File SCSIPassThrough.cpp, Line 290 G: CdRom2: SCSIStatus(x00) WinError(121) NeroError(-600) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 17 80 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x0a1e0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 17:05:49 #22 CDR -600 File Writer.cpp, Line 302 Device not available G: BENQ DVD LS DW1655 17:05:49 #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 17:05:49 #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 17:05:52 #25 Phase 127 File dlgbrnst.cpp, Line 1730 Generating DVD high compatibility borders 17:07:48 #26 Phase 129 File dlgbrnst.cpp, Line 1730 Generating DVD borders completed successfully 17:07:48 #27 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 12/08/2004 15:04:49 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Any help will be much appreciated, thankyou
Hello. Edit your post (click the pencil/paper icon in the upper right of the post) and edit out the program serial number beginning 1C...... Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 I'd run the Nero 7 Clean Tool and Uninstall this version and then download and install version 7.0.8.2. http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html 7.0.8.2: http://www.filehippo.com/download_nero_7_premium/?845 I don't see any identification of the media in the log. This is usually a bad sign. Are you using good quality media like Taiyo Yuden, Verbatim, or Made in Japan labeled Sony and Fuji media?
Yes I use verbatim advanced azo+ which i heard was good. What will changing to an earlier nero version do?
7.0.8.2 is a better version than what you currently have. I and many others still use 6.6.0.18. It is very important to run the appropriate Clean Tool to uninstall an existing version before installing another version. It appears as though you're burning an ISO image file. Why not just use DVD Decrypter or ImgBurn, both free, to burn the image file. Both are better burners imo than Nero anyway.
I tried it with dvd decrypter and got same prob. Heres the log: I 18:55:44 DVD Decrypter Version 3.1.4.0 started! I 18:55:44 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) W 18:55:44 Drive F:\ (FAT32) does not support files > 4 GB I 18:55:44 Initialising SPTI... I 18:55:44 Searching for SCSI / ATAPI devices... I 18:55:44 Found 1x DVD-ROM and 1x DVD±RW/±R! I 18:59:05 Operation Started! I 18:59:05 Source File: C:\Documents and Settings\Owner\My Documents\Az Downloads\fifa street 2\Fifa Street 2 PAL\Fifa Street 2 PAL.iso I 18:59:05 Source File Size: 4,698,734,592 bytes I 18:59:05 Destination Device: [0:0:0] BENQ DVD LS DW1655 BCHB (D I 18:59:05 Data Type: MODE1/2048 I 18:59:05 Write Mode: DVD I 18:59:05 Write Speed: 16x I 18:59:05 Test Mode: No I 18:59:05 BURN-Proof: Enabled I 18:59:05 Filling Buffer... I 18:59:06 Writing LeadIn... I 18:59:40 Writing Image... E 19:00:05 Failed to Write Sectors 3584 - 3615 - Invalid Address For Write I 19:00:05 Synchronising Cache... I 19:00:05 Closing Track... I 19:00:05 Finalising Disc... E 19:01:12 Failed to Write Image! E 19:01:12 Operation Failed! - Duration: 00:02:07 Thanks again for any help
