Hello, I have recently built my own pc and installed win98se onto it. I am not sure whether my bios settings are correct. Could some one please advise? Also in system information it is saying that a PCI system management bus is an unknown device and I cannot update drivers from the Win 98se cd or floppy. I dont have a very good knowledge on bios workings and will need replies very simple. Any info will be much appreciated. thankyou. Specs: Asus motherboard P4P800 Intel 865PE FSB800mhz DDr400 P4 2.6ghz Radeon 9600 XT 128mb DDR AGP*8 Seagate 80gb UDMA100 512mb DDR 400 5.1 Digital Soundblaster Live Samsung Syncmaster 152v TFT. Configure DRAM timing by SPD - Enabled Memory acceleration mode Auto DRAM idle timer Auto DRAM refresh rate Auto Graphic adapter priority AGP/ PCI Graphics Aperture size 64mb Spread spectrum Enabled ICH delayed transaction Enabled MPS revision 1.4 Plug and play o/s No PCI latency timer 64 Allocate IRC to PCI VGA Yes Palette snooping Enabled PCI IDE Busmaster Enabled cheers.
Everything looks ok there, you probably need to say Yes for the Plug and Play OS option. As far as the PCI System manangement bus, that is probably needing a driver for your motherboards chipset. Go to: http://support.intel.com/support/chipsets/inf/ The drivers are there as well as a utility to identify your chipset if needed though yours should be a 865 chipset.
