I have burned DVD data normally with my recorder for a long time but recently it always fail at the end, and I don't know what's the problem. this is my log file Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 12:48:21 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/29/2004 6:51:12 AM Nero version: 6.6.0.0 Recorder: <SONY DVD RW DW-U50A> Version: 1.5g - HA 1 TA 0 - 6.6.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD RW DW-U50A >Version: 1.5g - HA 1 TA 0 - 6.6.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-U50A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD RW DW-U50A E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (521712kB) Free physical memory: 118MB (120964kB) Memory in use : 76 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.12.2006 ISO compilation 7:43:38 PM #1 Text 0 File Isodoc.cpp, Line 6170 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 7:43:38 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 7:43:38 PM #3 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DW-U50A running 7:43:38 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 7:43:38 PM #5 Text 0 File Burncd.cpp, Line 3119 Turn on Disc-at-once, using DVD media 7:43:39 PM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2049663 (455:28.63, 4003MB) 7:43:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 7:43:39 PM #8 Text 0 File DlgWaitCD.cpp, Line 2310 Recorder: SONY DVD RW DW-U50A, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 7:43:39 PM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:43:39 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2049664 (2049664) = #2049664/455:28.64 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2049664 blocks [SONY DVD RW DW-U50A] -------------------------------------------------------------- 7:43:47 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1045 Prepare recorder [SONY DVD RW DW-U50A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4197711872, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2049664 | lead-out | 1 | 0x00 | 0x41 7:43:47 PM #12 Phase 24 File dlgbrnst.cpp, Line 1861 Caching of files started 7:43:48 PM #13 Text 0 File Burncd.cpp, Line 4135 Cache writing successful. 7:43:48 PM #14 Phase 25 File dlgbrnst.cpp, Line 1861 Caching of files completed 7:43:48 PM #15 Phase 28 File dlgbrnst.cpp, Line 1861 Speed measurement started 7:43:48 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2471 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:49:03 PM #17 Text 0 File WriterStatus.cpp, Line 116 <SONY DVD RW DW-U50A > start writing Lead-Out at LBA 2049664 (1F4680h), lenght 0 blocks 7:49:03 PM #18 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 7:49:04 PM #19 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 7:49:04 PM #20 Phase 29 File dlgbrnst.cpp, Line 1812 Speed measurement completed: 9.6x (13,348 KB/s) 7:49:04 PM #21 Phase 36 File dlgbrnst.cpp, Line 1861 Burn process started at 1x (1,385 KB/s) 7:49:04 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2471 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:49:04 PM #23 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 50:44,653 (3044653ms) -> OK 7:49:04 PM #24 Text 0 File DVDR.cpp, Line 1955 Recording mode: Sequential Recording Mode 7:49:04 PM #25 Text 0 File Mmc.cpp, Line 20542 Set BUFE: Power-Burn -> ON 7:49:04 PM #26 Text 0 File DVDR.cpp, Line 2096 Start write address at LBA 0 DVD high compatibility mode: Yes 7:49:04 PM #27 Text 0 File Cdrdrv.cpp, Line 8259 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:49:07 PM #28 Text 0 File Cdrdrv.cpp, Line 1281 19:49:07.953 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 7:50:38 PM #29 Text 0 File Cdrdrv.cpp, Line 1281 19:50:38.750 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 7:50:39 PM #30 Text 0 File Cdrdrv.cpp, Line 1281 19:50:39.500 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 7:50:39 PM #31 Text 0 File Cdrdrv.cpp, Line 1281 19:50:39.546 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 7:50:39 PM #32 Text 0 File Cdrdrv.cpp, Line 1281 19:50:39.625 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 7:50:39 PM #33 Text 0 File Cdrdrv.cpp, Line 1281 19:50:39.671 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 7:50:39 PM #34 Text 0 File Cdrdrv.cpp, Line 1281 19:50:39.703 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 7:50:39 PM #35 Text 0 File Cdrdrv.cpp, Line 1281 19:50:39.765 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 7:50:39 PM #36 Text 0 File Cdrdrv.cpp, Line 1281 19:50:39.796 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 8:04:16 PM #37 Text 0 File Cdrdrv.cpp, Line 1281 20:04:16.031 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 8:18:13 PM #38 Text 0 File Cdrdrv.cpp, Line 1281 20:18:13.828 - SONY DVD RW DW-U50A\H1 T0 : Queue again later 8:18:20 PM #39 SCSI -1135 File Cdrdrv.cpp, Line 1429 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03910000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x08 CDB Data: 0x2A 0x00 0x00 0x11 0x1C 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x03 0x00 0x11 0x14 0x0D 0x12 0x00 0x00 0x00 0x00 0x0C 0x08 8:18:20 PM #40 CDR -1135 File Writer.cpp, Line 311 Write error 8:18:20 PM #41 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:18:20 PM #42 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 8:18:20 PM #43 Text 0 File DVDR.cpp, Line 2338 EndDAO: Last written address was 1121503 8:18:20 PM #44 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 8:18:20 PM #45 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 8:18:20 PM #46 Phase 38 File dlgbrnst.cpp, Line 1861 Burn process failed at 1x (1,385 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 12:48:21 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 7/28/2006 12:28:33 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 4, size=92928 bytes, created 9/8/2004 4:41:06 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 4, size=28672 bytes, created 9/8/2004 4:41:22 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 4, size=7680 bytes, created 9/8/2004 4:42:54 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 7:00:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Hope someone could help. I would really appreciate
Hi, Nero version is old.. Update here.. Pakc 1 Pack 2 Burning far too slow; burn @ 4-8x! You have NeroInCD installed, which conflicts with Nero itself.. Lol Run this to get rid of it.. InCD Clean Tool Memory usage is high. Close all app whilst burning, and don't multitask... Also, your media isn't recognised, hence the 0s... The Nero update should fix that (hopefully) as your drives firmware is up to date
You are correct Ripper, I did not see the top entry. (*see next post.) http://www.digitalfaq.com/media/dvdmedia.htm What is the speed of your media. For one of my old burners, I tracked down media rated at 1-2.4x, I believe, to get it to work correctly. I don't know if InCD being installed will cause you problems, but if upgrading the media doesn't help, you might check.
No it isn't... ...it says that these two... ...are fake codes, which isn't the same as... ...what he is using... ...and that site shows that code as real! Lol I think it is more of a compatibility issue with either the burner and his media, or his Nero version being older than his media. Not it being fake ;-)
Correct. Update your Nero version by running the two packages, then once updated (or befroe the update, whatever, it makes no difference) run the InCD Clean Tool. @Saltgrass: Lol no probs, I thought I'd just point it out And also, the speed of his media is 16x - I can tell from the MID Code Edit: Typo~ "form - from" ~
I've just tried to open the DVD which is failed with the log file above and omg I could still open every file without any problems! Hilarius! But I can't open all the DVDs failed before
