i really need help with this situation. this burned used to work, i made 1 dvd and then it eventually just died all together. no software is working (nero 6 ultra, sonic recordnow dx, and burnatonce. nothing works, it fails, it's almost like its not reading any blank disks (can read disks, but cannot read burned discs and cannot burn blank 4X TDK DVD+R). i need help with this problem is anybody can help. here is the log from Nero 6 Ultra: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM ahead WinASPI: File 'Crogram FilesAheadNeroWnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 Recorder: Version: GS0K - HA 0 TA 1 - 6.0.0.0 Adapter driver: HA 0 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: Version: .20Q - HA 1 TA 0 - 6.0.0.0 Adapter driver: <> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080P0 YAR4 nvidesm Port 0 ID 0 DMA: ? CdRomPeripheral : DVD-16X DVD-ROM BDV316C .20Q nvidesm Port 0 ID 0 DMA: ? CdRomPeripheral : LITE-ON DVDRW LDW-851S GS0K nvidesm Port 0 ID 1 DMA: ? ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 184MB (189052kB) Memory in use : 63 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.7.2004 ISO compilation 11:21:29 PM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:21:29 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 11:21:29 PM #3 Text 0 File Writer.cpp, Line 127 Writer LITE-ON DVDRW LDW-851S running 11:21:29 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 11:21:29 PM #5 Text 0 File Burncd.cpp, Line 3081 Turn on Disc-at-once, using DVD media 11:21:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 2295103 (510:01.28) Last address to be written: 2071071 (460:14.21) 11:21:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 11:21:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 11:21:30 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2071072 (2071072) = #2071072/460:14.22 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2071072 blocks [LITE-ON DVDRW LDW-851S ] -------------------------------------------------------------- 11:21:30 PM #10 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to LITE-ON DVDRW LDW-851S on a DVD+R media 11:21:30 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder LITE-ON DVDRW LDW-851S for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -53104640 11:21:30 PM #12 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 11:21:30 PM #13 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 11:21:30 PM #14 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 2.4x (3,312 KB/s) 11:21:30 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 11:21:30 PM #16 Text 0 File Cdrdrv.cpp, Line 7827 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 03 43 4D 43 20 4D 41 - 47 00 45 30 31 00 38 23 ..CMC.MAG.E01.8# 54 37 10 02 38 6A 02 88 - 67 15 15 0B 0B 08 08 01 T7..8j..g....... 19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................ 11:21:30 PM #17 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 21:41,405 (1301405ms) -> OK 11:21:30 PM #18 Text 0 File DVDPlusRW.cpp, Line 513 Start write address at LBA 0 DVD high compatibility mode: Yes 11:21:37 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1361 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03160000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 11:21:37 PM #20 Text 0 File Writer.cpp, Line 455 23:21:37.500 LITE-ON DVDRW LDW-851S : WriteBuffer reduced to 32768 Bytes 11:21:37 PM #21 Text 0 File Writer.cpp, Line 318 23:21:37.531 - LITE-ON DVDRW LDW-851S : Queue again later (Intervall : 19msec) 11:21:43 PM #22 SCSI -1076 File Cdrdrv.cpp, Line 1361 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03160000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x28 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x28 0x00 11:21:43 PM #23 CDR -1076 File Writer.cpp, Line 335 Disc changed 11:21:43 PM #24 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 11:21:43 PM #25 Text 0 File ThreadedTransfer.cpp, Line 221 conversion idle, stopping reader 11:21:43 PM #26 Phase 127 File dlgbrnst.cpp, Line 1818 Generating DVD high compatibility borders 11:21:43 PM #27 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 11:21:43 PM #28 Phase 129 File dlgbrnst.cpp, Line 1818 Generating DVD borders completed successfully 11:21:43 PM #29 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 11:21:43 PM #30 Phase 38 File dlgbrnst.cpp, Line 1818 Burn process failed at 2.4x (3,312 KB/s) Existing drivers: File 'DriversASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM File 'DriversPXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 1/3/2003 2:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers videsm.sys': Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 11/13/2002 3:10:00 PM (Adapter driver for rec) Registry Keys: HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)
DMA should be on for all drives. http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx http://www.mrbass.org/dvdnewbie/ This is rather strange. Normally after DMA in Nero logs it says ON or OFF. This just has ?
