I clicked on the Nero link on this thread and installed the new demo version you all have uploaded here. I burned 2 dvd's perfectly fine and then my third (a few day's later) failed. It had the following error message: 1C83-serial number removed Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.3.2 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 2, 3, 2 Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0D - HA 1 TA 2 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : LG CD-ROM CRD-8400B atapi Port 0 ID 0 DMA: Off CdRomPeripheral : 16X/48X DVD-ROM atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 0 DMA: On DiskPeripheral : WDC WD1600JD-00HBB0 08.0 viamraid Port 2 ID 0 DMA: Off === CDRom-Device-Map === LG CD-ROM CRD-8400B E: CDRom0 16X/48X DVD-ROM F: CDRom1 LITE-ON DVDRW SOHW-1673S G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048036kB) Free physical memory: 367MB (376424kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.8.2006 NeroAPI 10:07:44 AM #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 10:07:44 AM #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 10:07:44 AM #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 10:07:44 AM #4 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 10:07:44 AM #5 Text 0 File Reader.cpp, Line 124 Reader running 10:07:44 AM #6 Text 0 File Writer.cpp, Line 113 Writer G: LITE-ON DVDRW SOHW-1673S running 10:07:44 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:07:44 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:07:44 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:07:44 AM #10 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 10:07:44 AM #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286399 (508:05.24, 4465MB) 10:07:44 AM #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO 10:07:44 AM #13 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD+R Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 10:07:44 AM #14 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:07:44 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286400 (2286400) = #2286400/508:5.25 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286400 blocks [G: LITE-ON DVDRW SOHW-1673S] -------------------------------------------------------------- 10:07:44 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [G: LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682547200, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286400 | lead-out | 1 | 0x41 | 0x00 10:07:44 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:07:44 AM #18 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:07:45 AM #19 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 10:07:45 AM #20 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 10:07:45 AM #21 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 10:07:45 AM #22 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 16x (22,160 KB/s) 10:07:45 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:07:45 AM #24 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: SONY.... Media type ID: D21 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8 23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 10:07:45 AM #25 Text 0 File DVDR.cpp, Line 6444 Drive: LITE-ON DVDRW SOHW-1673S Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0 10:07:45 AM #26 CDR -1211 File DVDR.cpp, Line 5862 Book Type set to: DVD-ROM 10:07:45 AM #27 Text 0 File DVDPlusRW.cpp, Line 650 Start write address at LBA 0 DVD high compatibility mode: Yes 10:09:06 AM #28 SPTI -1106 File SCSIPassThrough.cpp, Line 291 G: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x00ca0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10:09:06 AM #29 CDR -1106 File Writer.cpp, Line 302 Power calibration error G: LITE-ON DVDRW SOHW-1673S 10:09:06 AM #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:09:06 AM #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:09:06 AM #32 Phase 127 File APIProgress.cpp, Line 278 Generating DVD high compatibility borders 10:09:06 AM #33 Phase 129 File APIProgress.cpp, Line 278 Generating DVD borders completed successfully 10:09:06 AM #34 Text 0 File DVDR.cpp, Line 6444 Drive: LITE-ON DVDRW SOHW-1673S Book Type request [LO], rev 3: DVD+R Changing the Book Type was finished successfully, return code 0 10:09:06 AM #35 Phase 38 File APIProgress.cpp, Line 278 Burn process failed at 16x (22,160 KB/s) 10:09:07 AM #36 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:09:07 AM #37 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 2:03:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 9, size=102656 bytes, created 5/30/2006 3:18:18 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 1, 0, 9, size=29568 bytes, created 5/30/2006 3:18:38 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 1, 0, 9, size=9984 bytes, created 5/30/2006 3:19:12 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) If anyone has any input that would be great thanks!
ronjoe1 hi DMA needs to be on you are burning very close to the edge of the disc where most errors occure due to uneven/missing dye. set your target to 4360 way to fast reduce burn speed to 6x or 8x Packet writing utilities are notorious for interfering with burn processes, as the way it works is to continually poll the burner to check for new media. This prevents the burn application gaining exclusive access to the burner, and sense code errors will happen - every time. Get rid of all packet writing utilities. They are more trouble than they are worth. uninstall Nero and reinstall without the InCD
I'd definitely slow the burn speed down. You should have DMA enabled on this: CdRomPeripheral : LG CD-ROM CRD-8400B atapi Port 0 ID 0 DMA: Off I kinda doubt it will have much to do with burning DVDs though....CD ROM. You have your HDD in some sort of RAID setup so DMA may not matter. I use a pair of HDDs in a RAID 0 configuration that does not use DMA. Yours may not either... It's not on an ATAPI buss. Here is my guide for enabling DMA if you want to try it: http://www.dvdplusvideo.com/dvdguide005.html To make the file size smaller: Open Shrink > Select Edit > Select Preferences... Change the Target DVD size drop-down menu to "Custom". Enter a smaller number for the MB. 4300 seems popular. Select OK. To set the burn speed slower (which is the most likely cause of your burn problem): After you select Backup!, the Backup DVD menu opens. Go to the Burn Settings tab and select a slower burn speed there. Make sure you have a blank DVD in your drive and spun up before setting this. FYI, Here is the InCD clean tool from Nero: http://nero.com/nero7/enu/InCD_CleanTool.html
fasfrank hi thanks for finishing it off for me. guess i'll have to give more in depth answers. a question, what do you set your target at ?
ok, my target is set to my Lite-on drive. I reinstalled older version of nero and tried burning again. It got to 15% and froze. I was gone for a few hour's so I didn't see that happen. I'm retrying at a lower burn speed.
tried again, got this: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0D - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === CdRomPeripheral : LG CD-ROM CRD-8400B atapi Port 0 ID 0 DMA: Off CdRomPeripheral : 16X/48X DVD-ROM atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 0 DMA: On DiskPeripheral : WDC WD1600JD-00HBB0 08.0 viamraid Port 2 ID 0 DMA: Off === CDRom-Device-Map === LG CD-ROM CRD-8400B E: CDRom0 16X/48X DVD-ROM F: CDRom1 LITE-ON DVDRW SOHW-1673S G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048036kB) Free physical memory: 561MB (574980kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.8.2006 NeroAPI 9:17:57 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 9:17:57 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 9:17:57 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 9:17:57 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 9:17:57 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 9:17:57 PM #6 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1673S running 9:17:57 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:17:58 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:17:58 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 9:17:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2267583 (503:54.33, 4428MB) 9:17:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 9:17:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD+R Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 9:17:58 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:17:58 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2267584 (2267584) = #2267584/503:54.34 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267584 blocks [LITE-ON DVDRW SOHW-1673S] -------------------------------------------------------------- 9:17:58 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644012032, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2267584 | lead-out | 1 | 0x41 | 0x00 9:17:58 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 9:17:58 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 9:17:58 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 9:17:58 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 12x (16,620 KB/s) 9:17:58 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:17:58 PM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: SONY.... Media type ID: D21 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8 23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 9:17:58 PM #22 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SOHW-1673S Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0 9:17:58 PM #23 CDR -1211 File DVDR.cpp, Line 5297 Book Type set to: DVD-ROM 9:17:58 PM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 9:19:19 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x015D0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 9:19:19 PM #26 CDR -1106 File Writer.cpp, Line 311 Power calibration error 9:19:19 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:19:19 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:19:19 PM #29 Phase 127 File APIProgress.cpp, Line 276 Generating DVD high compatibility borders 9:19:19 PM #30 Phase 129 File APIProgress.cpp, Line 276 Generating DVD borders completed successfully 9:19:19 PM #31 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SOHW-1673S Book Type request [LO], rev 3: DVD+R Changing the Book Type was finished successfully, return code 0 9:19:19 PM #32 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 12x (16,620 KB/s) 9:19:19 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 9:19:19 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 2:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
man, I'm going through alot of disc's with this! I lowered the file size & then tried again. Worked that time. I noticed that it only gave me the option's of really low burning speed's after that. 2.4x or maximum...
