Have been having trouble burning this project striaght to disk, so I burn to file image. WHen I try to burn the file image to disk, I still get burn failure. Here is the log - any help is appreciated: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.0.3 (Nero Express) Recorder: <LITE-ON DVDRW LDW-411S> Version: FS0H - HA 0 TA 3 - 6.3.0.3 Adapter driver: <nvatabus> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITE-ON DVDRW LDW-411S >Version: FS0H - HA 0 TA 3 - 6.3.0.3 Adapter driver: <nvatabus> HA 0 === Scsi-Device-Map === DiskPeripheral : ST3120026A nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : LITE-ON DVDRW LDW-411S nvatabus Port 0 ID 3 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW LDW-411S D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 243MB (249408kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.7.2006 Burn DVD Image 11:16:13 AM #1 Text 0 File Reader.cpp, Line 118 Reader running 11:16:13 AM #2 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW LDW-411S running 11:16:13 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -166744064 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=447:54.34 ( 2015584) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Owner\Desktop\CHeapTrickBudokan.nrg> 11:16:13 AM #4 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 11:16:49 AM #5 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2297887 (510:38.37, 4488MB) Last address to be written: 2015583 (447:54.33, 3936MB) 11:16:49 AM #6 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 11:16:49 AM #7 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: LITE-ON DVDRW LDW-411S, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 11:16:49 AM #8 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.) 11:16:49 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 2015584 (2015584) = #2015584/447:54.34 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2015584 blocks [LITE-ON DVDRW LDW-411S ] -------------------------------------------------------------- 11:16:49 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [LITE-ON DVDRW LDW-411S ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4127916032, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2015584 | lead-out | 1 | 0x00 | 0x41 11:16:49 AM #11 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 11:16:49 AM #12 Text 0 File Burncd.cpp, Line 4073 Cache writing successful. 11:16:49 AM #13 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 11:16:49 AM #14 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 4x (5,520 KB/s) 11:16:49 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:16:49 AM #16 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 12:32,610 (752610ms) -> OK 11:16:49 AM #17 Text 0 File DVDR.cpp, Line 1512 Recording mode: Sequential Recording Mode 11:16:49 AM #18 Text 0 File Mmc.cpp, Line 19487 Set BUFE: supported -> ON , SMART-BURN : ON 11:16:49 AM #19 Text 0 File DVDR.cpp, Line 1643 Start write address at LBA 0 DVD high compatibility mode: Yes 11:16:49 AM #20 Text 0 File Cdrdrv.cpp, Line 7941 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:17:03 AM #21 Text 0 File Cdrdrv.cpp, Line 1277 11:17:03.234 - LITE-ON DVDRW LDW-411S\H0 T3 : Queue again later 11:17:37 AM #22 SCSI -1135 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 0, TA 3, LUN 0, buffer 0x07780000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x11 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 11:17:37 AM #23 CDR -1135 File Writer.cpp, Line 301 Write error 11:17:37 AM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 11:17:37 AM #25 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 11:17:37 AM #26 Text 0 File DVDR.cpp, Line 1847 EndDAO: Last written address was 4511 11:17:37 AM #27 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 11:17:37 AM #28 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 11:17:37 AM #29 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 4x (5,520 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 11/11/2004 9:54:01 PM (Prassi/Veritas driver for win 2K) File 'Drivers\nvatabus.sys': Ver=5.10.2600.0518 built by: WinDDK, size=89856 bytes, created 2/11/2005 6:11:02 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
your drive needs a firmware update to FSOK: http://forum.rpc1.org/dl_result.php?kaj=1&isces Turn on DMA: http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues you're at the minimum requirement of memory... I'd get more! I'd use better media than that. Some members say that Ritek is good media.... I prefer the best: Taiyo Yuden, Verbatim, Sony, Maxell----Made in Japan Media! the program is having a hard time recognizing your disk. Try using better media or check to see that your disk isn't scratched or dirty. If it's ok then it's just not recognizing your disk, therefor you are getting a: just a few things I found..... maybe someone else can find more!
Update Nero to 6.6.0.18 here, http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe oops, IHoe beat me to it. Follow his advice.
I tried Taiyo Yuden, but got same thing. Before I updated firmware I tried on my newer computer (which runs a higher version of NERO) and was able to burn fine. Thanks for the suggestions.
