everytime i encode a movie and then try to burn it by using dvd shrink it burns to 3% and then says burn process failed. i am using memorex media. also when i use nero 7 and the burn process completes, and then i go to watch the movie it plays fine until about the middle of the movie and then it starts to freeze and jump. i am using dvd shrink 3.2.0.15 with anydvd 6.0.6.1 or nero 7 with the same anydvd. pls someone help.
Without a nero log its not as easy to determine why, if you can post your last failed log, it would be helpful. It's found here: Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.txt Based on what you've stated, so assumptions can be made. Memorex is often considered to be poor quality media and anytime you try to burn on cheap stuff, you're asking for trouble, burns are bound to fail. Consider switching to a better brand of disks like Verbatim, Sony, or Taiyo Yuden looking for the made in japan on the box. This can be cause by a number things.. 1)Unsing poor quality media 2)Burning too fast 3)An incompatibility issue between the media and the player itself Use the media stated above Burn slower at 4x speed Make sure your player is able to recognize and play the type of media you're using (DVD+R, DVD-R, DVD+/-RW) It's also important to make sure your burner has the latest firmware installed, you can check here, just enter the model# in the search field; http://forum.rpc1.org/dl_search.php
i got the sony media, but i still am having the same problem as i stated earlier: my burnt copy of the movie is still freezing about half the way through the movie. sorry to bother you, but i am getting frustrated
@ boobie1, Like John, said if u post the nero log, then members can help u out more. dont forget to edit ur serial number out too.
i just encoded & burned the movie ATL, i used dvd shrink 3.2.0.15 and anydvd 6.0.6.1 and when i was watching the movie it started freezing half the way through the movie. i am using sony media and i even slow it down to 4x. what is going on? pls help me. i have uninstalled nero 7
boobie1, johnl123 asked you to post the Nero Log so we can see it. But now you have uninstalled Nero. Looks like we will have to do this the hard way. List your system specs: Ram, etc. List the name and model number of the burner and the firmware version you are using on that burner. List the name and model # of the DVD Player you are using. I really think you probably need a firmware upgrade so it recog. the blank media better and that is what the log would have told John123 along w/ any other errors you were getting. See if that disk plays in a friends DVD Player as it could also be the DVD Player. You can try cleaning it but some Players only like certain brands of DVD's
I too had this exact problem when I first started making copies of my DVDs, it turned out to be an incompatibility between my DVD player and the media I was using. My player was only able to play original DVD-Video disks correctly, when I tried playing DVD+Rs or DVD-Rs, The movie would freeze up half way thru. Check your player's manual and make sure it can play DVD+R or DVD-R disks, if not, you have two choices... 1) Buy a new multiformat player (today, they're pretty cheap), one that will play all formats available. 2) If your burner supports the feature, you can try and booktype DVD+R disks only as DVD-Video disks. Booktyping fools the player into recognizing the disks as DVD-Video disks and plays them usually without a problem. Here's some info on it; http://www.k-probe.com/bitsetting-booktype-faq.php EDIT: Hey Car.Mike, it's been a while
johnl123, Yeah. Business has been so good that it is taking away my time on the forum. The Court System has me flying all over the country looking at different items. The good thing is they do not question the expense statements and they reimburse w/in a week.
Car.Mike Flying all over the country sounds like a great and exciting job, I'm sure you're never bored. I'm an engineer stuck in one place, working on one project, listening to the same people tell the same stories, but it's a job. Glad your back John.
i saved my log file to nerorecode-notebook, but i don't know how to post it on here, can you tell me how how to post it once it ask me if i want save it. by the way i did re-install nero 7,and tried to record a movie, but it said burn process failed.
Boobie, post the burn log, just open the nerohistory.txt file then copy the last log in it then paste on here Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.txt edit-heres a pic
Same problem with burning process failed. I have read the previous threads and am posting the nero notepad history files I located using search. If these are what you mentioned previously, please advise regarding its content. Thanks, bigdadsho. Windows 98 4.90 (ME) IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 6/8/2000 5:00:00 PM ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero version: 6.3.1.25 (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.25 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <DVDRW IDE 16X >Version: A188 - HA 1 TA 0 - 6.3.1.25 Adapter driver: <ESDI_506> HA 1 DVDRW IDE 16X (Target 0, E: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ? LG CD-RW CED-8080B (Target 1, F: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ? Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523304kB) Free physical memory: 259MB (265868kB) Memory in use : 41 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.11.2005 DVD-Copy on the fly 9:36:22 PM #1 Text 0 File Reader.cpp, Line 126 Reader running 9:36:22 PM #2 Text 0 File DVDCopy.cpp, Line 271 DVD Track-Information from source disc Last LBA on layer 0 = 1767103 / 0x1AF6BF / 3451MB S01 T01 Con 0x14 Start 0 Len 3262432 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) 9:36:22 PM #3 CDCOPY -33 File DVDCopy.cpp, Line 311 This DVD is copy-protected and cannot be read Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/2002 11:55:38 AM File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 7/29/2003 12:04:20 AM File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 7/29/2003 12:04:20 AM File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 5/9/2003 4:56:34 PM File 'IoSubsys\CDUDF.VXD': Ver=3.01d (177), size=63869 bytes, created 6/29/2000 3:01:00 AM File 'IoSubsys\CDUDFRW.VXD': Ver=3.01d (177), size=151807 bytes, created 6/29/2000 3:01:00 AM File 'IoSubsys\CDRPWD.VXD': Ver=3.01d (177), size=48647 bytes, created 6/29/2000 3:01:00 AM File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 6/8/2000 5:00:00 PM File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 6/8/2000 5:00:00 PM File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 6/8/2000 5:00:00 PM File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 6/8/2000 5:00:00 PM Registry Keys: ====== *** Nero-Burning Rom, History File *** ====== Windows 98 4.90 (ME) IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 6/8/2000 5:00:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero API version: 6.3.1.25 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <DVDRW IDE 16X> Version: A188 - HA 1 TA 0 - 6.3.1.25 Adapter driver: <ESDI_506> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder DVDRW IDE 16X (Target 0, E: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ? LG CD-RW CED-8080B (Target 1, F: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ? Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523304kB) Free physical memory: 0MB (304kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.12.2006 NeroAPI 8:34:58 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 8:34:58 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 8:34:59 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 8:35:01 PM #4 Text 0 File Reader.cpp, Line 126 Reader running 8:35:01 PM #5 Text 0 File Writer.cpp, Line 124 Writer DVDRW IDE 16X running 8:35:01 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 8:35:01 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 8:35:08 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 8:35:13 PM #9 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-At-Once, using DVD media 8:36:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286143 (508:01.68, 4465MB) 8:36:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO 8:36:42 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: DVDRW IDE 16X, Media type: DVD-R Disc Manufacturer: OPTODI - SCR016 Disc Application Code: 64, Disc Physical Code: 193 8:36:42 PM #13 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 8:36:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [DVDRW IDE 16X ] -------------------------------------------------------------- 8:36:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286144 | lead-out | 1 | 0x00 | 0x41 8:36:42 PM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 8:36:42 PM #17 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 8:36:42 PM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 8:36:42 PM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 16x (22,160 KB/s) 8:36:42 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:36:42 PM #21 Text 0 File DVDR.cpp, Line 2000 Recording mode: Sequential Recording Mode 8:36:42 PM #22 Text 0 File Mmc.cpp, Line 20660 Set BUFE: Super Link -> ON 8:36:42 PM #23 Text 0 File DVDR.cpp, Line 2141 Start write address at LBA 0 DVD high compatibility mode: Yes 8:36:42 PM #24 Text 0 File Cdrdrv.cpp, Line 8230 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:37:01 PM #25 Text 0 File Cdrdrv.cpp, Line 1297 20:37:01.530 - DVDRW IDE 16X\H1 T0 : Queue again later 8:37:10 PM #26 Text 0 File Cdrdrv.cpp, Line 1297 20:37:10.650 - DVDRW IDE 16X\H1 T0 : Queue again later 8:37:10 PM #27 Text 0 File Cdrdrv.cpp, Line 1297 20:37:10.760 - DVDRW IDE 16X\H1 T0 : Queue again later 8:37:10 PM #28 Text 0 File Cdrdrv.cpp, Line 1297 20:37:10.870 - DVDRW IDE 16X\H1 T0 : Queue again later 8:37:11 PM #29 Text 0 File Cdrdrv.cpp, Line 1297 20:37:11.030 - DVDRW IDE 16X\H1 T0 : Queue again later 8:37:11 PM #30 Text 0 File Cdrdrv.cpp, Line 1297 20:37:11.140 - DVDRW IDE 16X\H1 T0 : Queue again later 8:37:11 PM #31 Text 0 File Cdrdrv.cpp, Line 1297 20:37:11.300 - DVDRW IDE 16X\H1 T0 : Queue again later 8:37:11 PM #32 Text 0 File Cdrdrv.cpp, Line 1297 20:37:11.410 - DVDRW IDE 16X\H1 T0 : Queue again later 8:37:11 PM #33 Text 0 File Cdrdrv.cpp, Line 1297 20:37:11.520 - DVDRW IDE 16X\H1 T0 : Queue again later 8:41:57 PM #34 SCSI -1135 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x08210000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x07 0x8F 0x40 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 8:41:57 PM #35 CDR -1135 File Writer.cpp, Line 304 Write error 8:41:57 PM #36 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:41:57 PM #37 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 8:41:57 PM #38 Text 0 File DVDR.cpp, Line 2383 EndDAO: Last written address was 495423 8:41:57 PM #39 Phase 38 File APIProgress.cpp, Line 273 Burn process failed at 16x (22,160 KB/s) 8:41:57 PM #40 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 8:41:57 PM #41 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/2002 11:55:38 AM File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 7/29/2003 12:04:20 AM File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 7/29/2003 12:04:20 AM File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 5/9/2003 4:56:34 PM File 'IoSubsys\CDUDF.VXD': Ver=3.01d (177), size=63869 bytes, created 6/29/2000 3:01:00 AM File 'IoSubsys\CDUDFRW.VXD': Ver=3.01d (177), size=151807 bytes, created 6/29/2000 3:01:00 AM File 'IoSubsys\CDRPWD.VXD': Ver=3.01d (177), size=48647 bytes, created 6/29/2000 3:01:00 AM File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 6/8/2000 5:00:00 PM File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 6/8/2000 5:00:00 PM File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 6/8/2000 5:00:00 PM File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 6/8/2000 5:00:00 PM Registry Keys: [19.12.2006]------------------------------------ 20:35:00 Robot error messages from: ====== *** NeroAPI, History File *** ====== Windows 98 4.90 (ME) IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 6/8/2000 5:00:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero API version: 6.3.1.25 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <DVDRW IDE 16X> Version: A188 - HA 1 TA 0 - 6.3.1.25 Adapter driver: <ESDI_506> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder DVDRW IDE 16X (Target 0, E: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ? LG CD-RW CED-8080B (Target 1, F: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ? Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523304kB) Free physical memory: 0MB (300kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.12.2006 NeroAPI 10:39:21 AM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 10:39:22 AM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 10:39:22 AM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 10:39:24 AM #4 Text 0 File Reader.cpp, Line 126 Reader running 10:39:25 AM #5 Text 0 File Writer.cpp, Line 124 Writer DVDRW IDE 16X running 10:39:25 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:39:25 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 10:39:28 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 10:39:30 AM #9 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-At-Once, using DVD media 10:44:28 AM #10 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286143 (508:01.68, 4465MB) 10:44:28 AM #11 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO 10:44:28 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: DVDRW IDE 16X, Media type: DVD-R Disc Manufacturer: OPTODI - SCR016 Disc Application Code: 64, Disc Physical Code: 193 10:44:28 AM #13 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 10:44:28 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [DVDRW IDE 16X ] -------------------------------------------------------------- 10:44:28 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286144 | lead-out | 1 | 0x00 | 0x41 10:44:28 AM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 10:44:28 AM #17 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 10:44:28 AM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 10:44:28 AM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 16x (22,160 KB/s) 10:44:28 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:44:28 AM #21 Text 0 File DVDR.cpp, Line 2000 Recording mode: Sequential Recording Mode 10:44:28 AM #22 Text 0 File Mmc.cpp, Line 20660 Set BUFE: Super Link -> ON 10:44:28 AM #23 Text 0 File DVDR.cpp, Line 2141 Start write address at LBA 0 DVD high compatibility mode: Yes 10:44:28 AM #24 Text 0 File Cdrdrv.cpp, Line 8230 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:44:47 AM #25 Text 0 File Cdrdrv.cpp, Line 1297 10:44:47.540 - DVDRW IDE 16X\H1 T0 : Queue again later 10:44:57 AM #26 Text 0 File Cdrdrv.cpp, Line 1297 10:44:57.480 - DVDRW IDE 16X\H1 T0 : Queue again later 10:44:57 AM #27 Text 0 File Cdrdrv.cpp, Line 1297 10:44:57.590 - DVDRW IDE 16X\H1 T0 : Queue again later 10:44:57 AM #28 Text 0 File Cdrdrv.cpp, Line 1297 10:44:57.700 - DVDRW IDE 16X\H1 T0 : Queue again later 10:44:57 AM #29 Text 0 File Cdrdrv.cpp, Line 1297 10:44:57.860 - DVDRW IDE 16X\H1 T0 : Queue again later 10:44:57 AM #30 Text 0 File Cdrdrv.cpp, Line 1297 10:44:57.970 - DVDRW IDE 16X\H1 T0 : Queue again later 10:44:58 AM #31 Text 0 File Cdrdrv.cpp, Line 1297 10:44:58.140 - DVDRW IDE 16X\H1 T0 : Queue again later 10:44:58 AM #32 Text 0 File Cdrdrv.cpp, Line 1297 10:44:58.250 - DVDRW IDE 16X\H1 T0 : Queue again later 10:44:58 AM #33 Text 0 File Cdrdrv.cpp, Line 1297 10:44:58.360 - DVDRW IDE 16X\H1 T0 : Queue again later 10:50:02 AM #34 SCSI -1135 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x066E0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x07 0x74 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 10:50:02 AM #35 CDR -1135 File Writer.cpp, Line 304 Write error 10:50:02 AM #36 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:50:02 AM #37 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:50:02 AM #38 Text 0 File DVDR.cpp, Line 2383 EndDAO: Last written address was 488607 10:50:02 AM #39 Phase 38 File APIProgress.cpp, Line 273 Burn process failed at 16x (22,160 KB/s) 10:50:02 AM #40 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 10:50:02 AM #41 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/2002 11:55:38 AM File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 7/29/2003 12:04:20 AM File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 7/29/2003 12:04:20 AM File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 5/9/2003 4:56:34 PM File 'IoSubsys\CDUDF.VXD': Ver=3.01d (177), size=63869 bytes, created 6/29/2000 3:01:00 AM File 'IoSubsys\CDUDFRW.VXD': Ver=3.01d (177), size=151807 bytes, created 6/29/2000 3:01:00 AM File 'IoSubsys\CDRPWD.VXD': Ver=3.01d (177), size=48647 bytes, created 6/29/2000 3:01:00 AM File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 6/8/2000 5:00:00 PM File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 6/8/2000 5:00:00 PM File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 6/8/2000 5:00:00 PM File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 6/8/2000 5:00:00 PM File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 6/8/2000 5:00:00 PM Registry Keys: [20.12.2006]------------------------------------ 10:39:23 Robot error messages from: ====== *** NeroAPI, History File *** ======
