I have Nero Recode 2CE and twice the burn process failed. I am using a Sony DRU-500A recorder. The error log is listed below. Any help would be deeply appreciated. Thanks in advance. ********** Nero Recode 2 CE ********** Version: 2.2.6.17 Project type: Nero Digital Target size: DVD5 (2282925) 12:54:51 File LangStreamPatcher.cpp, Line 56 Command table patching started... 12:54:51 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: SONY DVD RW DRU-500A Number of copies: 1 Write speed: 0 KB/s Temp folder: C:\Nero (28274626560 bytes free) Direct burning: false Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL NeroDigital profile: Standard Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 12:54:57 File burn_ndigital.cpp, Line 158 NeroDigital: init 12:54:57 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD-R 12:54:58 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2292150 sectors (2298496) 12:54:58 File burn_ndigital.cpp, Line 269 NeroDigital: burning 2292150 sectors (1193779 required) 12:54:58 File burn_ndigital.cpp, Line 301 NeroDigital: Adjusting target size 12:54:58 File burn_ndigital.cpp, Line 343 NeroDigital: beginning 1st-pass operation 12:54:58 File burn_ndigital.cpp, Line 697 NeroDigital: encode VTS_08_1 Source: Size (720,480) Display Aspect Ratio (16,9) Deinterlace disabled Cropping enabled (4, 6, 4, 12) Resizing enabled (720,384) Pixel ratio (1,1) Bitrate: 4000000 bps 12:54:58 File burn_ndigital.cpp, Line 722 Nth-pass file = C:\DOCUME~1\Michael\LOCALS~1\Temp\\VTS_08_1a03812.bin Audio channels = 2 Profile = 4 Bitrate = 80 RCmode = 2 Sampling rate = 44100 12:55:00 File burn_ndigital.cpp, Line 924 NeroDigital: waiting for graph to complete 13:27:37 File burn_ndigital.cpp, Line 1018 graph completed successfully 13:27:37 File burn_ndigital.cpp, Line 697 NeroDigital: encode VTS_08_2 Source: Size (720,480) Display Aspect Ratio (16,9) Deinterlace disabled Cropping enabled (4, 8, 4, 12) Resizing enabled (720,384) Pixel ratio (1,1) Bitrate: 4000000 bps 13:27:37 File burn_ndigital.cpp, Line 722 Nth-pass file = C:\DOCUME~1\Michael\LOCALS~1\Temp\\VTS_08_2a03812.bin Audio channels = 2 Profile = 4 Bitrate = 80 RCmode = 2 Sampling rate = 44100 13:27:39 File burn_ndigital.cpp, Line 924 NeroDigital: waiting for graph to complete 14:00:13 File burn_ndigital.cpp, Line 1018 graph completed successfully 14:00:13 File burn_ndigital.cpp, Line 697 NeroDigital: encode VTS_08_3 Source: Size (720,480) Display Aspect Ratio (16,9) Deinterlace disabled Cropping enabled (128, 8, 4, 12) Resizing enabled (592,400) Pixel ratio (1,1) Bitrate: 4000000 bps 14:00:13 File burn_ndigital.cpp, Line 722 Nth-pass file = C:\DOCUME~1\Michael\LOCALS~1\Temp\\VTS_08_3a03812.bin Audio channels = 2 Profile = 4 Bitrate = 80 RCmode = 2 Sampling rate = 44100 14:00:15 File burn_ndigital.cpp, Line 924 NeroDigital: waiting for graph to complete 14:30:12 File burn_ndigital.cpp, Line 1018 graph completed successfully 14:30:12 File burn_ndigital.cpp, Line 697 NeroDigital: encode VTS_08_4 Source: Size (720,480) Display Aspect Ratio (16,9) Deinterlace disabled Cropping enabled (4, 6, 4, 12) Resizing enabled (720,384) Pixel ratio (1,1) Bitrate: 4000000 bps 14:30:12 File burn_ndigital.cpp, Line 722 Nth-pass file = C:\DOCUME~1\Michael\LOCALS~1\Temp\\VTS_08_4a03812.bin Audio channels = 2 Profile = 4 Bitrate = 80 RCmode = 2 Sampling rate = 44100 14:30:13 File burn_ndigital.cpp, Line 924 NeroDigital: waiting for graph to complete 15:03:12 File burn_ndigital.cpp, Line 1018 graph completed successfully 15:03:12 File burn_ndigital.cpp, Line 697 NeroDigital: encode VTS_08_5 Source: Size (720,480) Display Aspect Ratio (16,9) Deinterlace disabled Cropping enabled (228, 6, 214, 10) Resizing enabled (272,400) Pixel ratio (1,1) Bitrate: 4000000 bps 15:03:12 File burn_ndigital.cpp, Line 722 Nth-pass file = C:\DOCUME~1\Michael\LOCALS~1\Temp\\VTS_08_5a03812.bin Audio channels = 2 Profile = 4 Bitrate = 80 RCmode = 2 Sampling rate = 44100 15:03:14 File burn_ndigital.cpp, Line 924 NeroDigital: waiting for graph to complete 15:04:11 File burn_ndigital.cpp, Line 1018 graph completed successfully 15:04:11 File burn_ndigital.cpp, Line 391 NeroDigital: finished 1st-pass 15:04:11 File burn_ndigital.cpp, Line 407 NeroDigital: 0 files require 2nd pass 15:04:11 File burn_ndigital.cpp, Line 480 NeroDigital: beginning 2nd-pass operation 15:04:11 File burn_ndigital.cpp, Line 527 NeroDigital: Compiling volume completed successfully 15:04:11 File burn_ndigital.cpp, Line 557 NeroDigital: begin burn operation 15:04:11 File NeroRecorderBase.cpp, Line 1096 Burning 5 files with total size of 1893244671 bytes on hard disk 1A2X-C701-4000-2394-3695-4066 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'G:\Nero\Nero Recode\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.6.0.9 Installed in: G:\Nero\Nero Recode\NeroFiles\ Application: Ahead\Nero Recode Internal Version: 6, 6, 0, 18e Recorder: <SONY DVD RW DRU-500A> Version: 2.1a - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400BB-00JHC0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : MITSUMI CD-ROM FX3400S!B atapi Port 0 ID 1 DMA: Off DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-204B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-R/RW SW-204B E: CDRom0 SONY DVD RW DRU-500A H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 680MB (696612kB) Memory in use : 33 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.3.2006 NeroAPI 3:04:12 PM #1 SCSI -1065 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04D26200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x20 0x00 3:04:12 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 3:04:12 PM #3 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-500A running 3:04:12 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 3:04:12 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 3:04:13 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 924623 (205:28.23, 1805MB) 3:04:13 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 3:04:13 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: SONY DVD RW DRU-500A, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 3:04:13 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:04:13 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 924624 (924624) = #924624/205:28.24 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 924624 blocks [SONY DVD RW DRU-500A] -------------------------------------------------------------- 3:04:13 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [SONY DVD RW DRU-500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1893629952, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 924624 | lead-out | 1 | 0x41 | 0x00 3:04:13 PM #12 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 3:04:13 PM #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 3:04:13 PM #14 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 3:04:13 PM #15 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 3:04:13 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:04:13 PM #17 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode for Multisession 3:04:13 PM #18 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Power-Burn -> ON 3:04:13 PM #19 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: No 3:04:13 PM #20 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:05:13 PM #21 SCSI -1106 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x06350000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x08 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x03 0xFF 0xFD 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x73 0x03 3:05:13 PM #22 CDR -1106 File Writer.cpp, Line 311 Power calibration error 3:05:13 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:05:13 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 3:05:14 PM #25 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 2239 3:05:14 PM #26 Phase 133 File APIProgress.cpp, Line 276 Writing short lead-out 3:05:14 PM #27 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x04 3:05:14 PM #28 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error 3:05:14 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 3:05:14 PM #30 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 4x (5,540 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 15:05:14 File NeroRecorderBase.cpp, Line 906 Burn failed (3) 15:05:14 File burn_ndigital.cpp, Line 200 NeroDigital: exit
@mhl1959 First let's edit out that serial # - don't want someone else using it! It located 2x in the log under these Burning 5 files with total size of 1893244671 bytes on hard disk & Leonidov It's the 1A #. Your firmware is up to date but your burner isn't liking those Fuji disc. Try Taiyo Yuden or Verbatim. Your drive not liking the media is one reason for a power calibration error - here's the rest of the reason for the error you received: *Check your power connectors, loose connections do occur. Don't share power with other devices. It needs its own power connector. If the errors occurs with an external recorder, Check the USB cable and connections. * Try different configurations, such as taking the DVD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master. * Clean or have your DVD burner serviced. There are cleaning kits available. Sometimes just a gentle appplication of canned air can remove dust blocking the laser. *Replace the DVD burner.
Thanks, I'll try that. Maybe I should try a different burner other than Nero. Can you recommend another good one or better than Nero ?
There is always good old DVD Shrink: http://www.afterdawn.com/software/video_software/dvd_rippers/dvd_shrink.cfm and if you wanted to burn with shrink, and not use nero, you would need DVD Decrypter, or Imageburn. Decrypter http://www.mrbass.org/dvdrip/ Imageburn http://www.afterdawn.com/software/cdr_software/cdr_tools/imgburn.cfm Also CloneDVD2 along with AnyDVD are two great programs that make backing up movies effortless: http://www.slysoft.com/en/
