Hi I am attaching a log file of the last time I tried to burn a DATA disc. I am using a CD-R disc. I am running on a Pentium ll 232mhz cpu. ERROR MESSAGE READS: Invalid Block Address / Burn failed at 12x 1800 kbs This is the log. Thanks a bundle Ed Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <LITE-ON CD-RW SOHR-5239V>Version: 2$0A - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 1536kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <FUNAI E295X >Version: 1.01 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On DiskPeripheral : FUJITSU MPE3064AT atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON CD-RW SOHR-5239V atapi Port 1 ID 0 DMA: On CdRomPeripheral : FUNAI E295X atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON CD-RW SOHR-5239V F: CDRom0 FUNAI E295X E: CDRom1 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 36700160 (36700160) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 127MB (130612kB) Free physical memory: 15MB (15892kB) Memory in use : 87 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.11.2005 CD-ROM (ISO) 1:56:51 PM #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 1:56:51 PM #2 Text 0 File Burncd.cpp, Line 2948 LITE-ON CD-RW SOHR-5239V Buffer underrun protection activated 1:56:51 PM #3 Text 0 File Reader.cpp, Line 127 Reader running 1:56:51 PM #4 Text 0 File Writer.cpp, Line 122 Writer LITE-ON CD-RW SOHR-5239V running 1:56:51 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 1:56:52 PM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Track-At-Once, using CD-R/RW media 1:56:52 PM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 187810 ( 41:46.10) 1:56:52 PM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 1:56:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON CD-RW SOHR-5239V; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 1:56:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:56:53 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 187811 (187811) = #187811/41:44.11 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 187809 blocks [LITE-ON CD-RW SOHR-5239V] -------------------------------------------------------------- 1:56:53 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON CD-RW SOHR-5239V] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 384944128, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 187811 | lead-out | 1 | 0x41 | 0x00 1:56:53 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119 Removed 2 run-out blocks from end of track 1. Length: 187811 -> 187809. 1:56:53 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 1:57:01 PM #15 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 1:57:01 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 1:57:01 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (2,400 KB/s) 1:57:01 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:57:02 PM #19 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 1:57:13 PM #20 SCSI -400 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04360000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x80 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 1:57:13 PM #21 CDR -400 File Writer.cpp, Line 311 Unspecified target error LITE-ON CD-RW SOHR-5239V\H1 T0 1:57:13 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:57:14 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 1:57:16 PM #24 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state LITE-ON CD-RW SOHR-5239V\H1 T0 1:57:16 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 1:57:16 PM #26 Text 0 File Mmc.cpp, Line 16452 <LITE-ON CD-RW SOHR-5239V> start Close Session 1:57:33 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (2,400 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (098), size=52816 bytes, created 2/11/2005 11:01:22 PM File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1038), size=22089 bytes, created 2/11/2005 11:01:22 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Your Firmware is out of date. Current version is 2$0B, here is the link to update: http://forum.rpc1.org/dl_firmware.php?download_id=2104 Here is how you can turn DMA on, it's written by alkohol: ((To enable DMA back ON by "uninstalling" it's driver “for Win XP users”)) A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES" B) left click on "HARDWARE", left click on "DEVICE MANAGER" C) left click on + sign of DVD/CD-ROM Drives D) double left click on your DVD burner or your dvd-rom drive E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer F) once you restart your computer, Windows should automatically detect your DVD burner’s drive and re-install it for you. That's it...easy as smoking!! NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the “IDE ATA/ATAPI Controllers” (A) left click on + sign of "IDE ATA/ATAPI Controllers" (B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel") (C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!! ***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps. I don't know how CDs work by CMC mags in the DVD world suck. But I don't think it matters as much w/ CDs. I think those are Roxio drivers. Roxio will conflict w/ Nero. So go DL roxiozapper to completly rid your system of roxio.
Hi Nero Well now I've done it. I upgraded the driver to my burner. Ran a DATA burn. Worked. First time. Guess what, now I can't read the disk. Here is the log of my good burn. What did I miss. ED Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <LITE-ON CD-RW SOHR-5239V>Version: 2$0B - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 1536kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <FUNAI E295X >Version: 1.01 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On DiskPeripheral : FUJITSU MPE3064AT atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON CD-RW SOHR-5239V atapi Port 1 ID 0 DMA: On CdRomPeripheral : FUNAI E295X atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON CD-RW SOHR-5239V F: CDRom0 FUNAI E295X E: CDRom1 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 36700160 (36700160) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 127MB (130612kB) Free physical memory: 4MB (4208kB) Memory in use : 96 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.11.2005 CD-ROM (ISO) 6:27:53 PM #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 6:27:53 PM #2 Text 0 File Burncd.cpp, Line 2948 LITE-ON CD-RW SOHR-5239V Buffer underrun protection activated 6:27:54 PM #3 Text 0 File Reader.cpp, Line 127 Reader running 6:27:54 PM #4 Text 0 File Writer.cpp, Line 122 Writer LITE-ON CD-RW SOHR-5239V running 6:27:54 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:27:54 PM #6 Text 0 File Burncd.cpp, Line 3233 Turn on Track-At-Once, using CD-R/RW media 6:27:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 7388 ( 1:40.38) 6:27:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 6:27:55 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON CD-RW SOHR-5239V; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 6:27:55 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:27:55 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 7389 (7389) = #7389/1:38.39 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 7387 blocks [LITE-ON CD-RW SOHR-5239V] -------------------------------------------------------------- 6:27:55 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON CD-RW SOHR-5239V] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 15439872, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 7389 | lead-out | 1 | 0x41 | 0x00 6:27:55 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119 Removed 2 run-out blocks from end of track 1. Length: 7389 -> 7387. 6:27:58 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 6:28:00 PM #15 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 6:28:00 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 6:28:00 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 52x (7,800 KB/s) 6:28:00 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:28:00 PM #19 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 6:28:16 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:28:17 PM #21 Text 0 File Mmc.cpp, Line 16452 <LITE-ON CD-RW SOHR-5239V> start Close Session 6:28:29 PM #22 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 52x (7,800 KB/s) 6:28:29 PM #23 Phase 78 File dlgbrnst.cpp, Line 1832 Data verification started 6:28:32 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 1119 Removed 2 run-out blocks from end of track 1. Length: 7389 -> 7387. 6:28:40 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:28:41 PM #26 Phase 80 File dlgbrnst.cpp, Line 1832 Data verification completed successfully Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (098), size=52816 bytes, created 2/11/2005 11:01:22 PM File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1038), size=22089 bytes, created 2/11/2005 11:01:22 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This concerns me. 128MB is RAM is bad enough but you multi task as well. You're gonna need to buy more or at the very least close all unneeded apps via task manager. DO NOT MULTI-TASK! You never finalized it so that's why it can't be read. But wait... why's it say you aren't doing a multi session??? Maybe someone can clear that up for you. YOu still have those roxio drivers. I'm telling you they conflict w/ Nero. Get rid of them via roxiozapper. Unless you want to use Roxio and just get rid of Nero. I don't think it matters since your burning a CD but try lowering your speed.
