Burner Max FAQ - All of your questions (hopefully) answered here!

well i'll find out thursday,thanks funksoulb

 

I have the iHAS124b with modded firmware, latest version of imgburn. I backed up my COD MW3 disc I purchased yesterday using XBC and the 0800 drive with the V3 firmware.

Trying to write the image to a blank DL disc using imgburn (settings are correct)
and an iHAS1124b (modded ALOS firmware).

I still get the error message that the image is too large to fit the disc.

I cancelled the write.

Should I be seeing the message?

Will the modded iHAS writer just write the whole image?

I don't want to write only part of the image, I want to be sure imgburn will do 100% of the image.

Any help would be appreciated!

 

sorry, double post

 

@ckeays - No, you shouldn't get the message about the ISO being too big. Try flashing your burner with Burner Max again, cos someone else a few posts up from you had the same problem and re-flashing it fixed it.

 

Hey thanks alot for the tip. I will try it and post my results.

Cheers!

 

just reflashed the drive, same thing. Imgburn shows the message
"There doesn't appear to be enough space on the disc....."

I get two choices,
1. write until the end of the image (overburn)
2. write until the end of the disc (Truncate)

Anyone?

EDIT: Problem solved. Here is how I figured it out.

Using the flash utility in the iHAS124B folder doesn't work for me. The program shows the drive is flashed and does not give any errors when flashing. So i figured it was ok.

I dumped the flash with the flash utility program in the main folder and compared it to the modified flash. Of course it was not the same.

Using the flash utility in the main folder (not the one in the iHAS124B folder) I was able to write the flash and then dump it again.

I again compared the dumped file to the modified firmware file.

This time both files were the same, and there was no error message from Imgburn.

It works!

Thanks for the help!

 

So I am pretty sure I have the latest 2.0 firmware on my xbox (I have a friend do it)I say this because I can play Bodycount and Dead Isloand fine. I also have the Lite-on 324 B flashed with Max Burner.

Problem:
Ive burned COD MW3 twice now, one before I got the Lite-on burner and used the turncate method and then the second with the flashed Lite-on. non work Im getting what some have already reported as the black screen for 5 seconds and then back to the dash with it saying "play game" with no game picture.

Before I trash yet another Verbatim (001 2.4x made in Singapore)any help on this would be very much appreciated.

If I do need to update the flash on my xbox (benq drive) can you please direct where to find how to do this b/c my friend has since moved.

 

How do I know if my liteon burner will work its model dh-16aal

 

I reflashed mine again and still have no success

 

I assume I can't but I'm asking to be sure. Will the Burner Max flashed drive RIP 360 games or do I still need to use my Kreon flashed drive? I'm asking because I've run out of PC drive bays and SATA slots.

Is it just me? This link brinsme to to a blank white page.
http://www.multiupload.com/D3IPJY7CIW

Can I use iXtreme 1.6 with my swap disc or must I reflash to LT+ 2.0 or above.

 

No, it won't rip games. Also Kreon drives can't rip XGD3 games, you can't use them to rip newer games.

Nope, that's just you.

Just update to LT 3.0 and everything will work fine.

 

Thanks I updated to LT+ 3.0
Can someone please upload the stuff at this link.
http://www.multiupload.com/D3IPJY7CIW
I still can't access multiupload.com at all. I searched and it seems a lot of people have had problems accessing this site. I tried using JDownloader and it said perhaps wrong URL or the download is not available any more.

 

This one here seems to work:
http://hotfile.com/dl/133005649/08f40be/iXtreme_Burner_Max.rar.html

 

Awsome, thanks!

 

so what if other disc have worked for us should we switch to verbatim or keep using what we always used.. and will hp disc work for older xgd2 iso's