I am not sure I am posting this in the right group but I using Nero 6. I have a AMD3500+ on a Asus motherboard with a gig of memory and a Samsung SH-S182M burner. The problem I have is after Nero reads the DVD and "ask" for blank media I insert a Verbatim DL disk (also tried Memorex). The burner checks the disk and says it is incorrect media type and shows it as a CD-R. I am guessing that this is a hardware problem as the burner was only $30.00 but I wanted to get some other opnions before buying another. I have always used NEC in the past but when the last one died I found this one at Microcenter and bought it. The burner works good with CD's and single layer DVD's. I appreiate(sp) any help anyone can offer.
Hi Brently Post your last Nero log. May help as sort this out. The logs are separated by something like this: ======***Nero Burning History***====== Just be sure to edit out the serial # - usually begins w/ 1A, 1C or 5C. You can find them here: program files>ahead>nero>nerohistory. Which app in Nero are you using? What movie?
check see if you have your firmware is up to date... http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=28
I am using Nero Burning Rom, the movie is X Men 3 (which I do own) I should also tell you I am using AnyDVD. Here is the log: Main n\a Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 10:13:43 AM Nero version: 6.0.0.0 Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.0.0.0 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <TSSTcorp CD/DVDW SH-S182M>Version: SB02 - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === CdRomPeripheral : TSSTcorp CD/DVDW SH-S182M atapi Port 1 ID 0 DMA: On DiskPeripheral : SAMSUNG SP2504C nvata Port 2 ID 0 DMA: ? ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 959MB (982320kB) Free physical memory: 657MB (673784kB) Memory in use : 31 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.11.2006 CD Copy 9:57:40 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 9:57:40 PM #2 Text 0 File Writer.cpp, Line 127 Writer Image Recorder running 9:57:41 PM #3 Text 0 File Burncd.cpp, Line 3081 Turn on Disc-at-once, using DVD media 9:57:41 PM #4 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 2147483646 (477218:35.21) Last address to be written: 3877383 (861:38.33) 9:57:41 PM #5 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 9:57:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 9:57:41 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 Data (mode 1)) 2 indices, index0 (150) not provided original CD pos #0 + 3877384 (3877384) = #3877384/861:38.34 not relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3877384 blocks [ Image Recorder ] -------------------------------------------------------------- 9:57:41 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder Image Recorder for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -648744960 9:57:41 PM #9 Phase 120 File dlgbrnst.cpp, Line 1818 Creating the image for burning 9:57:41 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0 9:57:42 PM #11 SCSI -1190 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x032D1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x6F Sense Qual: 0x03 CDB Data: 0x28 0x00 0x00 0x00 0x04 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x6F 0x03 9:57:42 PM #12 TRANSFER -25 File Reader.cpp, Line 351 Error reading Data 9:57:42 PM #13 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 9:57:42 PM #14 Phase 67 File dlgbrnst.cpp, Line 1818 Burn process failed Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Main n\a 1A23[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 10:13:43 AM Nero version: 6.0.0.0 Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB02 - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <TSSTcorp CD/DVDW SH-S182M>Version: SB02 - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === CdRomPeripheral : TSSTcorp CD/DVDW SH-S182M atapi Port 1 ID 0 DMA: On DiskPeripheral : SAMSUNG SP2504C nvata Port 2 ID 0 DMA: ? ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 959MB (982320kB) Free physical memory: 199MB (204240kB) Memory in use : 79 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.11.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 10:00:02 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 10:00:02 PM #2 Text 0 File Writer.cpp, Line 127 Writer Image Recorder running 10:00:03 PM #3 Text 0 File Burncd.cpp, Line 3081 Turn on Disc-at-once, using DVD media 10:00:04 PM #4 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 2147483646 (477218:35.21) Last address to be written: 3877383 (861:38.33) 10:00:04 PM #5 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 10:00:04 PM #6 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 10:00:04 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 Data (mode 1)) 2 indices, index0 (150) not provided original CD pos #0 + 3877384 (3877384) = #3877384/861:38.34 not relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3877384 blocks [ Image Recorder ] -------------------------------------------------------------- 10:00:04 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder Image Recorder for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -648744960 10:00:04 PM #9 Phase 120 File dlgbrnst.cpp, Line 1818 Creating the image for burning 10:00:04 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0 10:15:30 PM #11 Text 0 File WriterStatus.cpp, Line 112 < Image Recorder > start writing Lead-Out at LBA 3877384 (3B2A08h), lenght 0 blocks 10:15:30 PM #12 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 10:15:30 PM #13 Phase 121 File dlgbrnst.cpp, Line 1818 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 10:15:34 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 10:15:34 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 363 Image was written as DAO. DAOI: MediaCatalogNumber='' TocType=0x00 Finalized=0x01 FirstTrack=0x01 LastTrack=0x01 ISRC='' Blocksize=2048: TrackMode='TRM_DATA_MODE1' TrackConfig=0x00: FirstIndex=00: LastIndex=01: Index0FilePos=0 Index1FilePos=307200 NextTrackFilePos=-648744960 CUES: 000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 003: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=861:38.34 ( 3877384) 10:15:34 PM #3 Text 0 File Burncd.cpp, Line 3081 Turn on Disc-at-once, using DVD media 10:17:20 PM #4 Phase 40 File dlgbrnst.cpp, Line 1818 Aborted by user 10:17:20 PM #5 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 10:17:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: TSSTcorp CD/DVDW SH-S182M; CD type reading failed ATIP Data: ? Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Ok from I can see from the log looks like you are using the wrong option (?) in Nero Burning Rom. You see references to cd like this in the log CD type reading failed. Use Recode instead of Burning Rom - set recode to DVD-9 so no compression is needed. Or in Burning Rom have set to DVD-9 also and use the DVD copy option. But I don't think your version of Nero supported dual layer media or if it did not very well. So your Nero can definitely use an update - update to 6.6.0.18. Here are some links: Package 1 http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 (recode & vision) http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Give that a go and let us know.
I picked up Nero7 and uninstalled the old Nero. After I installed 7 the burn went without a hitch, although it took almost a hour. Problem Fixed! Thanks for the help.
Glad to here you got it working! Yeah dual layer can take longer - using lower burn speeds & burning 2x the amount of data so will take longer.
