hey I've always been able to burn stuff but recently it just stopped working. I'm quite new to all this so I don't really get alot of the terms so I'll just post the error log? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/27/2004 12:35:32 AM Nero Version: 6.6.0.6 (Nero Express) Recorder: <BENQ DVD DD DW1640> Version: BSHB - HA 3 TA 1 - 6.6.0.6 Adapter driver: <atapi> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <BENQ DVD DD DW1640 >Version: BSHB - HA 3 TA 1 - 6.6.0.6 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP0802N atapi Port 2 ID 0 DMA: On CdRomPeripheral : ATAPI CD-ROM 50X atapi Port 3 ID 0 DMA: Off CdRomPeripheral : BENQ DVD DD DW1640 atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === ATAPI CD-ROM 50X D: CDRom0 BENQ DVD DD DW1640 G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 32505856 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 191MB (196080kB) Free physical memory: 42MB (43064kB) Memory in use : 78 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.10.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 8:37:16 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 8:37:16 PM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 8:37:17 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2091088 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 8:37:17 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2091088 = 2091088, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 8:37:17 PM #5 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 8:37:17 PM #6 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2091087 (464:41.12, 4084MB) 8:37:17 PM #7 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 8:37:17 PM #8 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 8:37:17 PM #9 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:37:17 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2091088 (2091088) = #2091088/464:41.13 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2091088 blocks [Image Recorder] -------------------------------------------------------------- 8:37:17 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4282548224, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2091088 | lead-out | 1 | 0x41 | 0x00 8:37:17 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 8:37:17 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:49:46 PM #14 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 2091088 (1FE850h), lenght 0 blocks 8:49:46 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:49:49 PM #16 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 8:50:17 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 8:50:17 PM #2 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DD DW1640 running 8:50:17 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4282548224 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=464:41.13 ( 2091088) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <e:\Michael\My Documents\TempImage.nrg> 8:50:17 PM #4 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 8:51:57 PM #5 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2091087 (464:41.12, 4084MB) 8:51:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 8:51:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: BENQ DVD DD DW1640, Media type: DVD+R 8:51:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 8:51:57 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2091088 (2091088) = #2091088/464:41.13 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2091088 blocks [BENQ DVD DD DW1640] -------------------------------------------------------------- 8:51:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [BENQ DVD DD DW1640] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4282548224, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2091088 | lead-out | 1 | 0x41 | 0x00 8:51:57 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 8:51:57 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:51:57 PM #13 SCSI -1066 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x07300600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 8:51:57 PM #14 CDR -1207 File DVDR.cpp, Line 4805 Book Type automatically set to: Current recorder setting 8:51:57 PM #15 Text 0 File DVDPlusRW.cpp, Line 615 Start write address at LBA 0 DVD high compatibility mode: Yes 8:52:10 PM #16 SCSI -1176 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x06F70000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x01 8:52:10 PM #17 CDR -1176 File Writer.cpp, Line 311 Session fixation error 8:52:11 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:52:11 PM #19 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:52:11 PM #20 SCSI -1176 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 3, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x03 8:52:11 PM #21 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 8:52:11 PM #22 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 8:52:11 PM #23 Text 0 File DVDR.cpp, Line 5619 Drive: BENQ DVD DD DW1640 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 8:52:11 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Try updating the firmware on that burner, your is light years behind, current for this burner is BSRB, yours is about 8 or 9 versions behind. Your burner is having media recognition problems flashing the drive should help it. http://forum.rpc1.org/dl_firmware.php?download_id=2053 Also you need to free up more memory, try closing down some background programs that are running. It would be advisable if you can to bump up your memory 191mg is not a whole lot to work with. Try updating your Nero version to 6.6.0.18 that should help also. http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe And try burning at 4x, burning too slow is as bad as too fast especially with todays newer media.
