hi to u all... im new in this forum so if this prost doesnt belong here feel free to move it and if necessary close it well i have this big problem so i'd really appreciate if you could help me... the thing is that i download this game that was split into several files (.001 .002 .003...) i join them together using the winrar and i got the iso... well the problem is that when i try to burn the it using the nero 7.0 portable i get a problem... i read in some forums that an update to my firmware may help me but i've no idea how to do that... anyway... here is my log... Bernard GILET PortableAppZ 5C82-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.7.5.1 Internal Version: 7, 7, 5, 1 Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A101 - HA 1 TA 2 - 7.7.5.1 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <IDE-DVD ROM 16x >Version: HD09 - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : IDE-DVD ROM 16x atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === IDE-DVD ROM 16x E: CDRom0 SAMSUNG CD-R/RW SW-248F F: CDRom1 HL-DT-ST DVDRAM GSA-4120B G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 39845888 (0) Byte BUFE : 0 Physical memory : 247MB (253464kB) Free physical memory: 85MB (87084kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.9.2007 Burn DVD Image 04:28:32 p.m. #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 04:28:32 p.m. #2 Text 0 File Burncd.cpp, Line 3465 Turn on Disc-At-Once, using DVD media 04:28:33 p.m. #3 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1536517 (341:26.67, 3001MB) 04:28:33 p.m. #4 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 04:28:33 p.m. #5 Text 0 File DlgWaitCD.cpp, Line 2912 Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 04:28:33 p.m. #6 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 04:28:33 p.m. #7 Text 0 File ThreadedTransferInterface.cpp, Line 823 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1536518 (1536518) = #1536518/341:26.68 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1536368 blocks [G: HL-DT-ST DVDRAM GSA-4120B] -------------------------------------------------------------- 04:28:33 p.m. #8 Text 0 File ThreadedTransferInterface.cpp, Line 1026 Prepare [G: HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3146788864, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1536518 | 1536368 | 0x00 0 | 1 | 1 | 0x41 | 1536518 | 1536368 | 0x00 1536518 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 04:28:33 p.m. #9 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 04:28:33 p.m. #10 Phase 24 File dlgbrnst.cpp, Line 1760 Caching of files started 04:28:33 p.m. #11 Text 0 File Burncd.cpp, Line 4298 Cache writing successful. 04:28:33 p.m. #12 Phase 25 File dlgbrnst.cpp, Line 1760 Caching of files completed 04:28:33 p.m. #13 Phase 32 File dlgbrnst.cpp, Line 1760 Simulation started at 4x (5,540 KB/s) 04:28:33 p.m. #14 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 04:28:33 p.m. #15 Text 0 File DVDR.cpp, Line 3070 Recording mode: Sequential Recording Mode for Multisession 04:28:33 p.m. #16 Text 0 File DVDR.cpp, Line 3226 Start write address at LBA 0 DVD high compatibility mode: Yes 04:28:33 p.m. #17 Text 0 File Cdrdrv.cpp, Line 9288 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 04:38:08 p.m. #18 Text 0 File WriterStatus.cpp, Line 113 <G: HL-DT-ST DVDRAM GSA-4120B> start writing Lead-Out at LBA 1536368 (177170h), length 0 blocks 04:38:08 p.m. #19 Text 0 File DVDR.cpp, Line 3446 EndDAO: Last written address was 1536367 04:38:10 p.m. #20 Phase 133 File dlgbrnst.cpp, Line 1760 Writing short lead-out 04:38:11 p.m. #21 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 10 5B 01 00 0C 72 04 04:38:11 p.m. #22 CDR -1176 File ThreadedTransferInterface.cpp, Line 1926 Session fixation error G: HL-DT-ST DVDRAM GSA-4120B 04:38:11 p.m. #23 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1926 Could not perform end of Disc-at-once 04:38:11 p.m. #24 Text 0 File DVDR.cpp, Line 3446 EndDAO: Last written address was -1 04:38:11 p.m. #25 CDR -201 File WriterStatus.cpp, Line 162 Invalid write state G: HL-DT-ST DVDRAM GSA-4120B 04:38:11 p.m. #26 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 04:38:11 p.m. #27 Phase 34 File dlgbrnst.cpp, Line 1760 Simulation failed at 4x (5,540 KB/s) 04:38:12 p.m. #28 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 04:38:15 p.m. #29 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed 04:38:15 p.m. #30 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) i'm new with all this things... so please... PLEASE... if there is something i have to do to fix this explain it step by step... hope u can help me thanks in advance and sorry for the trouble... n______n
Looks like your using the original firmware so and updated if needed. A update in english is A116 - here's a link. There is a newer one A117 buts it's in Japanese and extracts the actual exe to a folder you need run which is also in japanese A little bit is in english and your drive will pop under target drive. For the A117 you would click on the red icon on the bottom right hand side to update. The blue one is for exit. Link for A117. For either one you run the .exe, have no discs in the drive, close running programs and keep the power on. Then press the red button to update for either version. It will take a minute or two. Reboot and the drive should be updated. Physical memory : 247MB Free physical memory: 85MB Memory in use : 65 % Add another 256 mb in memory if you can. Close any unneeded programs when burning to keep as much memory free as possible. Since you burning in simulation mode at least you haven't wasted any discs! Edit: Typos
thanks a los guys... i just updated my firmware... now ill try to burn again! just one question... this firmware update... do i have to do it on every computer i want to use my drive or this update works everywhere? Edit: I just tried... still doesn't work!!!!!!!! plz u guys have another way to fix this?
The updated firmware will 'stick' with the drive. It's updated to it's memory. Which version did you update to - A116 or A117? Sony made media is usually pretty good stuff but even with the firmware update may not be that compatible. Try different media like Taiyo Yuden or Verbatim.
I updates to A116 since you told me that the other was in japanese... well... i'll try other media and tell how it goes... thank for your help and patience! n______________________n
Not a problem I'd go ahead and try updating to the A117. The only problem was trying to read the interface since it was in Japanese. Since the red button for either one does the same thing - give it a go. The actual firmware code is written in code the drive understands so that's all that really matters to the drive
