Hi, I have a problem burning to these new dvd discs with nero because it fails at the end. I tried the same with another disc and it worked fine. I was just wondering if anyone knew how i could change the preferences so I could burn them to these particular discs. They're: gigatain DVD-R 4.7 120 Min
Windows Vista 6.0 IA32 WinAspi: - NT-SPTI used Nero Version: 9.0.9.100 Internal Version: 9, 0, 9, 100 Recorder: <HL-DT-ST DVDRAM GH15F> Version: EG00 - HA 1 TA 0 - 9.0.9.100 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: <HL-DT-ST DVDRAM GH15F >Version: EG00 - HA 1 TA 0 - 9.0.9.100 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === : WDC WD6400AAKS-22A7B 01.0 nvstor32 Port 3 ID 0 DMA: Off : HL-DT-STDVDRAM GH15F EG00 nvstor32 Port 3 ID 2 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GH15F E: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1797MB (1840792kB) Memory in use : 41 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.3.2009 UDF/ISO compilation 20:21:36 #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 20:21:36 #2 Phase 112 File dlgbrnst.cpp, Line 1767 DVD-Video files reallocation started 20:21:37 #3 Phase 114 File dlgbrnst.cpp, Line 1767 DVD-Video files reallocation completed (no file modified) 20:21:37 #4 Text 0 File Isodoc.cpp, Line 6789 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 20:21:37 #5 Phase 111 File dlgbrnst.cpp, Line 1767 DVD-Video files sorted 20:21:37 #6 ISO9660GEN -11 File Geniso.cpp, Line 3349 First writeable address = 0 (0x00000000) 20:21:37 #7 ISO9660GEN -11 File Geniso.cpp, Line 3349 First writeable address = 0 (0x00000000) 20:21:37 #8 Text 0 File Burncd.cpp, Line 3563 Turn on Disc-At-Once, using DVD media 20:21:37 #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142 FS Settings: using validator 'CUDFSettingsValidatorDVD' ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical' Changing UDF revision from '1.02' to '1.02' 20:21:37 #10 ISO9660GEN -11 File Geniso.cpp, Line 3349 First writeable address = 0 (0x00000000) 20:21:37 #11 ISO9660GEN -11 File Geniso.cpp, Line 3349 First writeable address = 0 (0x00000000) 20:21:37 #12 Text 0 File DlgWaitCD.cpp, Line 312 Last possible write address on media: 2297887 (510:38.37, 4488MB) Last address to be written: 2193295 (487:23.70, 4283MB) 20:21:37 #13 Text 0 File DlgWaitCD.cpp, Line 324 Write in overburning mode: NO (enabled: CD) 20:21:37 #14 Text 0 File DlgWaitCD.cpp, Line 2951 Recorder: HL-DT-ST DVDRAM GH15F, Media type: DVD-R Disc Manufacturer ID: <TYG02> <> Disc Application Code: 64, Disc Physical Code: 193 20:21:37 #15 Text 0 File DlgWaitCD.cpp, Line 499 >>> Protocol of DlgWaitCD activities: <<< ========================================= 20:21:37 #16 Text 0 File ThreadedTransferInterface.cpp, Line 756 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2193296 (2193296) = #2193296/487:23.71 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2193296 blocks [E: HL-DT-ST DVDRAM GH15F] -------------------------------------------------------------- 20:21:37 #17 Text 0 File ThreadedTransferInterface.cpp, Line 958 Prepare [E: HL-DT-ST DVDRAM GH15F] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4491870208, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2193296 | 0 | 0x00 2193296 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 20:21:37 #18 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 20:21:37 #19 Text 0 File Burncd.cpp, Line 4362 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 20:21:37 #20 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 20:21:37 #21 Text 0 File Burncd.cpp, Line 4484 Cache writing successful. 20:21:37 #22 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 20:21:37 #23 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 4x (5,540 KB/s) 20:21:37 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2675 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 20:21:37 #25 Text 0 File DVDR.cpp, Line 3259 Recording mode: Sequential Recording Mode for Multisession 20:21:37 #26 Text 0 File DVDR.cpp, Line 3413 Start write address at LBA 0 DVD high compatibility mode: Yes 20:21:37 #27 Text 0 File Cdrdrv.cpp, Line 10187 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) Outer Limit of Data Recordable Area: 26127F h Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: - Revision number of minimum recording speed: - Revision number table of recording speed: - - - - - - - Class: 0, Extended part version: 0 Start PSN of the Extra Border Zone: 2FE10 h Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h Media Specific [16..783]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 01 40 C1 FD 9E D8 52 00 - 02 87 0D 10 66 78 80 00 .@....R.....fx.. 03 54 59 47 30 32 00 00 - 04 00 00 00 00 00 00 00 .TYG02.......... 05 AA A2 22 22 20 02 00 - 06 08 0E 11 87 78 80 00 ...""........x.. 07 88 80 00 00 00 00 00 - 08 06 13 0D 10 0E 07 00 ................ 09 97 07 0D 0B 78 88 00 - 0A 80 00 00 00 00 10 00 .....x.......... 0B 06 18 17 85 78 75 00 - 0C D6 89 A8 92 01 20 00 .....xu......... 0D 10 00 D0 00 00 00 00 - 0E 09 21 35 2D 29 1B 00 ..........!5-).. 0F 50 1B 2B 1D 97 B5 00 - 10 88 84 00 04 00 04 00 .P.+............ 11 00 00 00 00 00 00 00 - 12 09 2D 33 2D 2B 1A 00 ..........-3-+.. 13 50 1D 2B 1F 97 B5 00 - 14 88 80 00 00 00 00 00 .P.+............ 15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 20:21:37 #28 Text 0 File DVDR.cpp, Line 3551 Reserved Track size: 2193296 (217790h, 4283MB) -> return code 0 20:21:37 #29 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 83836800 20:34:44 #30 SPTI -1039 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039) CDB Data: 0x2A 00 00 20 2E 20 00 00 20 00 00 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 Sense Area: 0x71 00 04 00 00 00 00 0A 32 34 04 0C 09 01 Buffer x1be2b600: Len x10000 0x00 00 01 BA 46 4F 7C DB FD 79 01 89 C3 F8 00 00 0x01 E0 07 EC 80 00 0D FF FF FF FF FF FF FF FF FF 0xFF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 20:34:44 #31 CDR -1039 File Writer.cpp, Line 306 Focus or tracking error E: HL-DT-ST DVDRAM GH15F 20:34:48 #32 Phase 133 File dlgbrnst.cpp, Line 1767 Writing short lead-out 20:34:51 #33 SPTI -1039 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039) CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 Sense Area: 0x71 00 04 00 00 00 00 0A 32 34 04 0C 09 01 20:34:51 #34 SPTI -1176 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 Sense Area: 0x70 00 05 00 00 00 00 0A 5B 01 00 0C 72 04 20:34:51 #35 Text 0 File DVDR.cpp, Line 3819 EndDAO: Last written address was 2108959 (202E1Fh)Close track 1, ret: 0 Close Session/Border, function 2, track: 3, finalize disc: NO, ret: -1176 20:34:51 #36 CDR -1039 File WriterStatus.cpp, Line 292 Focus or tracking error E: HL-DT-ST DVDRAM GH15F 20:34:51 #37 TRANSFER -24 File WriterStatus.cpp, Line 292 Could not perform end of Disc-at-once 20:34:51 #38 Text 0 File DVDPlusDualLayer.cpp, Line 1424 SetDriveCaps: Set LAST LBA of layer 1 to 0 20:34:51 #39 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 4x (5,540 KB/s) 20:34:51 #40 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 20:34:55 #41 Text 0 File Cdrdrv.cpp, Line 11444 DriveLocker: UnLockVolume completed 20:34:55 #42 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Try burning faster, I'd suggest 8X or 12X Basically your burner is having problems with your discs, but they are coding as Taiyo Yuden which should be top notch. You might try your PC's manufacturer site for a firmware update for your burner....it is a HL-DT-ST DVDRAM GH15F
I think there is something with the buggy Nvidia drivers that report DMA incorrectly. DMA is probably actually on, if this is the case and DMA still seems to be an issue you might need to look in BIOS to see how DMA is set up there.
So some of these Nvidia driver's will report DMA incorrectly? I'll have to read up on this. I wondered why you didn't comment on what i thought to be fairly obvious.
