My error log is as follows: 1A20-030E-0300-1349-1215-9547 1A23-0609-4030-2333-6402-0097 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US01 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <ELBY DVD-ROM >Version: 1.0 - HA 0 TA 0 - 6.6.0.16 Adapter driver: <ElbyVCD> HA 0 === Scsi-Device-Map === CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 0 ID 0 DMA: Off DiskPeripheral : HITACHI_DK23EA-30 atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 2 ID 0 DMA: On === CDRom-Device-Map === ELBY DVD-ROM F: CDRom1 TOSHIBA DVD-ROM SD-R2312 D: CDRom0 TSSTcorp CD/DVDW TS-H552U E: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 702MB (719856kB) Free physical memory: 292MB (299820kB) Memory in use : 58 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.10.2005 Burn DVD Image 20:03:11 #1 Text 0 File Reader.cpp, Line 127 Reader running 20:03:11 #2 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552U running 20:03:11 #3 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 20:03:11 #4 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2294303 (509:50.53, 4481MB) 20:03:11 #5 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 20:03:12 #6 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 20:03:12 #7 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 20:03:12 #8 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2294304 (2294304) = #2294304/509:50.54 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294304 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 20:03:12 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4698734592, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2294304 | lead-out | 1 | 0x41 | 0x00 20:03:12 #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 20:03:12 #11 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 20:03:12 #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 20:03:12 #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 20:03:12 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 20:03:12 #15 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 20:03:12 #16 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 20:03:12 #17 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 20:03:12 #18 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 20:03:37 #19 Text 0 File Cdrdrv.cpp, Line 1286 20:03:37.318 - TSSTcorp CD/DVDW TS-H552U\H3 T0 : Queue again later 20:03:38 #20 SCSI -500 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x07560000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 20:03:43 #21 SCSI -1114 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0CD61400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 20:03:43 #22 CDR -1114 File Writer.cpp, Line 311 Reset occurred 20:03:43 #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 20:03:43 #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 20:03:43 #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 607 20:03:58 #26 CDR -1033 File WriterStatus.cpp, Line 167 Drive not ready TSSTcorp CD/DVDW TS-H552U\H3 T0 20:03:58 #27 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 20:03:58 #28 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ElbyVCD.sys': Ver=4, 2, 0, 0, size=22016 bytes, created 28/11/2002 11:43:49 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- EDIT OUT your serial numbers via the pencil icon at top of post - firmware is too old, US06 is here - http://forum.rpc1.org/dl_firmware.php?download_id=2011 is your burner external ?. - i think that Elby thing is a virtual drive but don't know enough about Elby drivers. see last comment in my reply - you're burning to outer edge of discs. if you use DVD Shrink, set target size in Shrink's preferences to 4300MB, thus avoiding outer edge of discs and not sacrificing much space - hopefully the other recommendations will get you sorted - most people recommend 4x for movies - as i say i don't know much about Elby drivers, however what i don't see here are atapi drivers
