hi i hav all my files ready 2 burn on to a dvd-r using my HL-DT-ST DVD-ROM. i hav tryed both dvd-rom burner and nero recode but nothing seems to work as i always get teh same message. Here is the log of my last burn Aaron 1A21-0009-4030-2254-8317-8442 1A23-0809-9030-2266-1880-6162 1A40-0009-4130-2350-8826-7474 1A41-0809-4030-2308-1278-0211 1A42-0009-9130-2384-9529-3489 1A43-0809-4030-2217-6600-3181 1A44-0009-9130-2264-8119-2909 1A45-0809-4030-2230-2995-1206 1A46-0609-4130-2373-9529-2382 1A47-0809-9130-2329-0066-8778 1A48-0609-9130-2364-3597-7297 1A49-0809-4030-2332-7004-3704 1A4A-0009-4030-2316-1476-2189 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34 Nero Version: 6.6.0.8 Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.56 - HA 1 TA 1 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0N21 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160023AS atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163 D: CDRom0 _NEC DVD_RW ND-3500AG E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 125MB (128356kB) Memory in use : 75 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.3.2006 UDF/ISO compilation 15:43:21 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 15:43:21 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 15:43:21 #3 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:43:21 #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 15:43:21 #5 Text 0 File Reader.cpp, Line 127 Reader running 15:43:21 #6 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 15:43:21 #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 15:43:21 #8 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 15:43:21 #9 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1953007 (434:00.07, 3814MB) 15:43:21 #10 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 15:43:21 #11 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R Disc Manufacturer: MBI 03 - RG40 Disc Application Code: 64, Disc Physical Code: 193 15:43:21 #12 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:43:21 #13 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1953008 (1953008) = #1953008/434:0.8 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1953008 blocks [_NEC DVD_RW ND-3500AG] -------------------------------------------------------------- 15:43:21 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [_NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3999760384, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1953008 | lead-out | 1 | 0x41 | 0x00 15:43:22 #15 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 15:43:22 #16 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 15:43:22 #17 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 15:43:22 #18 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 1x (1,385 KB/s) 15:43:22 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:43:22 #20 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 15:43:22 #21 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 15:43:22 #22 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 15:43:22 #23 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 00 00 00 00 00 .`...0@P........ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:43:22 #24 SCSI -1046 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x1D 0xCC 0xF0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 15:43:22 #25 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 15:43:22 #26 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 15:43:22 #27 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 15:43:22 #28 Text 0 File DVDR.cpp, Line 5061 Drive: _NEC DVD_RW ND-3500AG Book Type request [NEC]: DVD-ROM Book Type setting not supported for the loaded disc type Changing the Book Type was finished with error, return code -4 15:43:22 #29 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765 Illegal disc 15:43:22 #30 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765 Could not perform start of Disc-at-once 15:43:22 #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 1x (1,385 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 06/01/2006 16:52:42 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I'm not sure what type disk mbi are. In any case it don't seem to like them. Thats a lot of serial #. You should remove them. There right after your name in the post.
i am using DVD-r (imation). which seial #'s sud i remove? u got any suggests 2 wat i can do 2 solve teh problem cos its not the disks cos ive tried several different brands.
All of those serial # in your post right after Aaron there are 13 of them. Just edit your post and remove them from the post. You might be able to get better results if you update nero.
help!!!!! plz some1 explain why this is happening!!!!!!! here is another log of another burn Project type: Copy entire DVD Target size: DVD5 (2282925) 16:05:52 File LangStreamPatcher.cpp, Line 56 Command table patching started... 16:05:52 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: _NEC DVD_RW ND-3500AG Number of copies: 1 Write speed: 0 KB/s Temp folder: C:\Documents and Settings\Aaron\My Documents\My Videos (112394813440 bytes free) Direct burning: true Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL Shutdown when finished: false Advanced Analysis: true Compress Adaptive: true 16:06:11 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VMG Menus Vobs [153 vobus] 55.55MB -> 55.55MB [R 1.00] Video: 55.13MB, extra: 0.43MB Audio: 0 streams Subpicture: 1 streams 0. 0. Unspecified 0.13MB [enabled] VTS_01 Title Vobs [18752 vobus] 3757.63MB -> 3757.63MB [R 1.00] Video: 3456.27MB, extra: 301.36MB Audio: 1 streams 0. 0. Dolby Digital 2-ch Unspecified 264.74MB [enabled] Subpicture: 0 streams 16:06:11 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 16:06:11 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD-R 16:06:11 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2286467 sectors (2298496) 16:06:13 File burn_dvdfiles.cpp, Line 684 Compile DVD: begin deep analysis 16:16:53 File burn_dvdfiles.cpp, Line 479 Compile DVD: burning 2286467 sectors (1952457 required) 16:16:53 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4465.76MB (3813.39MB obtained) 16:16:53 File burn_dvdfiles.cpp, Line 524 Compiling DVD Volume started 16:16:54 File vob_record.cpp, Line 643 DirectBurn offset: VIDEO_TS.VOB 16 16:16:57 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VMG Menus Vobs VMG Menus Vobs: Original 55.55MB -> Expected 55.55MB -> Output 55.55MB Finished error 0.00MB Ratio encoded = 0 Original encoded = 153 Slide encoded = 0 StillImage encoded = 0 Output extra size = 0.35MB Source video size = 55.20MB Pictures Modified [I 0] [P 0] [B 0] 16:17:02 File NeroRecorder.cpp, Line 448 Burn failed (3) ----- Begin NeroAPI error log ----- 1A21-0009-4030-2254-8317-8442 1A23-0809-9030-2266-1880-6162 1A40-0009-4130-2350-8826-7474 1A41-0809-4030-2308-1278-0211 1A42-0009-9130-2384-9529-3489 1A43-0809-4030-2217-6600-3181 1A44-0009-9130-2264-8119-2909 1A45-0809-4030-2230-2995-1206 1A46-0609-4130-2373-9529-2382 1A47-0809-9130-2329-0066-8778 1A48-0609-9130-2364-3597-7297 1A49-0809-4030-2332-7004-3704 1A4A-0009-4030-2316-1476-2189 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34 Nero API version: 6.6.0.8 Using interface version: 6.6.0.8 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.56 - HA 1 TA 1 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST3160023AS atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163 D: CDRom0 _NEC DVD_RW ND-3500AG E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 121MB (124916kB) Memory in use : 76 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.3.2006 NeroAPI 16:06:11 #1 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: -1 ( 0:00.-1, 0MB) 16:06:11 #2 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO 16:06:11 #3 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R Disc Manufacturer: OPTODI - SCR016 Disc Application Code: 64, Disc Physical Code: 193 16:06:11 #4 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 16:06:13 #5 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 16:06:13 #6 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 16:06:13 #7 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode for Multisession 16:06:13 #8 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 16:06:13 #9 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: No 16:06:13 #10 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 16:06:13 #11 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 16:06:13 #12 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 16:06:13 #13 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 16:06:13 #14 Text 0 File DVDR.cpp, Line 5061 Drive: _NEC DVD_RW ND-3500AG Book Type request [NEC]: DVD-ROM Book Type setting not supported for the loaded disc type Changing the Book Type was finished with error, return code -4 16:06:13 #15 Text 0 File BurnAtOnceRecorder.cpp, Line 1005 Estimated filesystem size: 544 16:06:13 #16 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 16:16:54 #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1686 Buffering files started 16:16:54 #18 Text 0 File BurnAtOnceRecorder.cpp, Line 1407 Buffering VIDEO_TS.VOB 16:16:59 #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2562 Finished buffering file VIDEO_TS.VOB of size 58253312 bytes (28444 sectors) 16:16:59 #20 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VIDEO_TS.VOB of size 58253312 bytes (28444 sectors) 16:16:59 #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2642 Buffering files finished successfully 16:17:02 #22 SCSI -1046 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x71 0x60 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 16:17:02 #23 Text 0 File BurnAtOnceRecorder.cpp, Line 679 Error reserving fragment (0) 16:17:02 #24 Text 0 File BurnAtOnceRecorder.cpp, Line 3629 Disc info: Partitions: 0 16:17:02 #25 Text 0 File BurnAtOnceRecorder.cpp, Line 1859 Error reserving start segment 16:17:02 #26 Text 0 File BurnAtOnceRecorder.cpp, Line 3629 Disc info: Partitions: 0 16:17:02 #27 Phase 179 File APIProgress.cpp, Line 276 Writing file to disc failed 16:17:02 #28 Text 0 File BurnAtOnceRecorder.cpp, Line 3629 Disc info: Partitions: 0 16:17:02 #29 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 16:17:03 #30 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 16:17:04 #31 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 06/01/2006 16:52:42 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ----- End NeroAPI error log ----- 16:17:05 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit some1, any1 plz help me!!!!!
The error is because it is attempting to booktype and the disk is -r. You can turn off the booktyping or use +r media. Those opto disks are not much better. I would get good media such as verbatum or T.Y. In any case don't try to booktype -r media.
soz but im a computer dumass lol, how do i do bookmark it??? sorry. im reli not gd on the com plz reply asap. reli appriciate ur help
