Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15h Recorder: <SONY DVD+RW DW-P50A> Version: 1.8f - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD+RW DW-P50A >Version: 1.8f - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD+RW DW-P50A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD+RW DW-P50A D: CDRom0 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 446MB (457712kB) Free physical memory: 268MB (274488kB) Memory in use : 40 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.10.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 5:30:25 PM #1 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A25600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 5:30:29 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 5:30:29 PM #3 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 5:30:29 PM #4 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2286032 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 5:30:29 PM #5 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2286032 = 2286032, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 5:30:29 PM #6 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 5:30:29 PM #7 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 2621439 (582:32.39, 5119MB) Last address to be written: 2286031 (508:00.31, 4464MB) 5:30:29 PM #8 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO (enabled: CD) 5:30:29 PM #9 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 5:30:29 PM #10 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:30:29 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2286032 (2286032) = #2286032/508:0.32 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286032 blocks [Image Recorder] -------------------------------------------------------------- 5:30:29 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681793536, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286032 | lead-out | 1 | 0x41 | 0x00 5:30:29 PM #13 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 5:30:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:59:02 PM #15 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 2286032 (22E1D0h), lenght 0 blocks 5:59:02 PM #16 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:59:04 PM #17 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 5:59:26 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 5:59:26 PM #2 Text 0 File Writer.cpp, Line 122 Writer SONY DVD+RW DW-P50A running 5:59:26 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4681793536 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=508:00.32 ( 2286032) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\PML\My Documents\TempImage.nrg> 5:59:26 PM #4 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 6:13:16 PM #5 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286031 (508:00.31, 4464MB) 6:13:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO (enabled: CD) 6:13:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: SONY DVD+RW DW-P50A, Media type: DVD+R Disc Manufacturer ID: PHILIPS, Media Type ID: C08, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 6:13:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.) 6:13:16 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2286032 (2286032) = #2286032/508:0.32 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286032 blocks [SONY DVD+RW DW-P50A] -------------------------------------------------------------- 6:13:16 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD+RW DW-P50A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681793536, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286032 | lead-out | 1 | 0x41 | 0x00 6:13:17 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 6:13:17 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:13:17 PM #13 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: PHILIPS. Media type ID: C08 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 50 48 49 4C 49 - 50 53 00 43 30 38 00 38 ...PHILIPS.C08.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 6:13:17 PM #14 Text 0 File DVDPlusRW.cpp, Line 663 Start write address at LBA 0 DVD high compatibility mode: Yes 6:41:42 PM #15 Text 0 File WriterStatus.cpp, Line 116 <SONY DVD+RW DW-P50A > start writing Lead-Out at LBA 2286032 (22E1D0h), lenght 0 blocks 6:41:42 PM #16 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:42:13 PM #17 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 2x (2,770 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/28/2002 11:27:50 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
When your done and you put the disc in the PC: Does it Play? If yes then it's probably a problem with either the write speed or the media, as your burning at 2x I doubt that the problem, I would be looking at trying some different media. Some standalone players will read certain media while others will not. There is a list of media and players at www.videohelp.com. If it will not play in the PC then there's a problem with the way you are encoding or burning..... Give us some more details and we'll be able to help you better.. =)
I cannot play in any dvd player and it worked great for two months. I know the drive works, because it records cd perfectly. I think it uses the same laser to burn cds and dvds. Am i right? The drive burn my dvd and it says burned successfully. So i think it is a problem with the software or settings. I hope you can help me.
