ok I was on here before and went through some solutions that were suggested. I did the roxio zapper, the pio solution (not even sure why my primary ide is showing up twice on my computer), and the flash "doohickey" thing to my dvd drive (firmware. my dvd drive came with my computer.) Now to note on the pio solution, when I uninstalled the drives to the ide, my computer wouldnt boot back to windows so i had to use the last good configuration boot. ok, so i tried to burn ice age 2. the first time it said failure to read %s. ok the second time around, i recoded just the main movie. that went fine until....WRITE ERROR!!!! what is going on. im about to give up on nero. i went and bought 2 different burners. tried one (a sorry version im assuming of dvd copy dvd to cd/dvd from best buy) and roxio easy cd/dvd which i havent installed yet. someone look at my log and let me know what is going on before i remove this program off my computer. the other only solution right now that i can think of is to buy and external dvd write drive and buy a new internal dvd write drive (which im looking in the market for. any suggestions on a good one????) ugggg, i dont know. anyhoo, here is my log! ********** Nero Recode 2 ********** Version: 2.2.6.17 's Computer Project type: Main Movie to DVD Target size: DVD5 (2282925) 23:34:11 File LangStreamPatcher.cpp, Line 56 Command table patching started... 23:34:11 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: LITE-ON DVDRW SOHW-1633S Number of copies: 1 Write speed: 0 KB/s Temp folder: C:\Documents and Settings\DJ\My Documents\Nero Recode (137401450496 bytes free) Direct burning: false Target media: DVD R/RW, DVD DL, DVD-RAM Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 23:34:15 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VTS_01 Title Vobs [10377 vobus] 4051.33MB -> 3797.22MB [R 1.00] Video: 3228.31MB, extra: 568.91MB Audio: 5 streams 0. 0. Dolby Digital 5.1-ch English 291.46MB [enabled] 1. 1. Dolby Digital 2-ch French 124.51MB [disabled] 2. 2. Dolby Digital 2-ch Spanish 125.10MB [disabled] 3. 3. Dolby Digital 2-ch English 124.84MB [enabled] 4. 4. Dolby Digital 2-ch English 124.78MB [enabled] Subpicture: 2 streams 0. 0. English - Normal Captions 7.55MB [enabled] 1. 1. Spanish 4.50MB [disabled] 23:34:15 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 23:34:15 File burn_dvdfiles.cpp, Line 479 Compile DVD: burning 2282925 sectors (1944239 required) 23:34:15 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4458.84MB (3797.34MB obtained) 23:34:15 File burn_dvdfiles.cpp, Line 524 Compiling DVD Volume started 23:42:14 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_2.VOB 23:48:25 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_3.VOB 23:54:42 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_4.VOB 23:58:33 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 4051.33MB -> Expected 3797.22MB -> Output 3794.21MB Finished error -3.00MB Ratio encoded = 73 Original encoded = 10304 Slide encoded = 0 StillImage encoded = 0 Output extra size = 573.85MB Source video size = 3220.55MB Pictures Modified [I 1] [P 5] [B 468] 23:58:58 File burn_dvdfiles.cpp, Line 547 Compile DVD: completed successfuly (3794.34MB) 23:59:01 File NeroRecorderBase.cpp, Line 1096 Burning 8 files with total size of 3978651648 bytes on hard disk 23:59:01 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 23:59:23 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD-R Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 6.6.1.4 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Internal Version: 6, 6, 1, 4d Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BPSA - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CD-S480/A5 atapi Port 0 ID 1 DMA: On DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 ASUS CD-S480/A5 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515376kB) Free physical memory: 24MB (25376kB) Memory in use : 95 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.12.2006 NeroAPI 11:59:23 PM #1 Phase 112 File APIProgress.cpp, Line 275 DVD-Video files reallocation started 11:59:23 PM #2 Phase 114 File APIProgress.cpp, Line 275 DVD-Video files reallocation completed (no file modified) 11:59:23 PM #3 Phase 111 File APIProgress.cpp, Line 275 DVD-Video files sorted 11:59:23 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 11:59:23 PM #5 Text 0 File Reader.cpp, Line 124 Reader running 11:59:23 PM #6 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1633S running 11:59:23 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:59:23 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:59:23 PM #9 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 11:59:24 PM #10 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1943247 (431:49.72, 3795MB) 11:59:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:59:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R Disc Manufacturer: MXL RG - 03 Disc Application Code: 64, Disc Physical Code: 193 11:59:24 PM #13 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:59:24 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1943248 (1943248) = #1943248/431:49.73 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1943248 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 11:59:24 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3979771904, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1943248 | lead-out | 1 | 0x41 | 0x00 11:59:24 PM #16 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:59:24 PM #17 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:59:24 PM #18 Phase 24 File APIProgress.cpp, Line 275 Caching of files started 11:59:24 PM #19 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 11:59:24 PM #20 Phase 25 File APIProgress.cpp, Line 275 Caching of files completed 11:59:24 PM #21 Phase 36 File APIProgress.cpp, Line 275 Burn process started at 8x (11,080 KB/s) 11:59:24 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:59:24 PM #23 Text 0 File DVDR.cpp, Line 2707 Recording mode: Sequential Recording Mode 11:59:24 PM #24 Text 0 File DVDR.cpp, Line 2863 Start write address at LBA 0 DVD high compatibility mode: Yes 11:59:24 PM #25 Text 0 File Cdrdrv.cpp, Line 8647 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:01:05 AM #26 Text 0 File Cdrdrv.cpp, Line 1200 00:01:05.375 - D: LITE-ON DVDRW SOHW-1633S : Queue again later 12:15:15 AM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 289 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 13 9C E0 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x06920000: Len x10000 0x00 00 01 BA 44 48 D4 38 AC 87 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 80 03 E6 80 89 20 83 01 05 0x40 E5 FF F0 00 E6 7A 11 0C 56 F9 8B CF BA 83 A1 12:15:15 AM #28 CDR -1135 File Writer.cpp, Line 311 Write error D: LITE-ON DVDRW SOHW-1633S 12:15:15 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:15:16 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:15:16 AM #31 Text 0 File DVDR.cpp, Line 3103 EndDAO: Last written address was 1285343 12:15:25 AM #32 Phase 38 File APIProgress.cpp, Line 275 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 00:15:27 File NeroRecorderBase.cpp, Line 906 Burn failed (3) 00:15:27 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit
Before you give up...try this Nero 6.6.1.4 This version of Nero contains some bugs, uninstall, run this clean tool http://ww2.nero.com/nero6/en/Clean_Tools.html and then install this more stable version, BOTH packages http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Update your firmware to BSOY from here http://www.liteonit.com/DOWNLOADS/ODD/SOHW-1633S/firmware/DR16BS0Y.zip You have far too much memory in use, dont multitask while burning, this too is a quirk of 6.6.1.4..memory usage I dont particularly like the discs you are using, I preferr Verbatim or Sony (made in japan) so slow your burn to 4X
Thanks Gwendolin for answering my post. ok when I try to update my firmware for my drive I get a warning that says: "NO MATCH DRIVE DETECTED! This utility is only for LITEON DVD RW SOHW 1633S drive. Detected drives"0-0-0-0 D: LITE ON DVD RW SOHW 1633S BPSA 0-0-1-0 E: ASUS CD-S480/A5 0.99"
BTW, WHERE DO I GET THE SERIAL NUMBER FROM? IT IS ASKING ME FOR THIS WITH THE DOWNLOAD YOU SUGGESTED?
Never mind on the serial number. I figured that out. But what is up with the update on my dvd drive and that message I wrote about in the second to last message?
with lite on drives i think you need to install firmwares in order from when they first came out check this link - http://forum.rpc1.org/dl_firmware.php?download_id=1934 maybe start from the first one bsoc then to bsoy if i am wrong please someone correct me peace
Maybe the firmware is connected to what country you are from. Try downloading it from whatever site you get when you go to liteonit.com. And, you might try to get the DMA for your hard drive turned on. I am not sure why you seem to have the hard drive on the secondary IDE channel and the other drives on the primary. Was it set up that way when you got the computer?
ok Here is my last log from the last time I tried to burn and this is after I installed the more stable nero. I wasn't multitasking or anything and I did stop some things from running in the background too to see if that would help. I also checked to make sure I saw Ultra... and not pio mode before I started. Now I did try to burn the same movie on my husband's computer. He has 2 brand new write drives and 1 gb of ram and and error message came up. I saved the log but forgot to transfer it onto my computer. I will post that later when I can get to it. I dont know. Maybe I should get more ram. only 512 on my puter. ok here is my log: ********** Nero Recode 2 ********** Version: 2.2.6.17 Donna's Computer Project type: Main Movie to DVD Target size: DVD5 (2282925) 14:18:32 File LangStreamPatcher.cpp, Line 56 Command table patching started... 14:18:32 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: LITE-ON DVDRW SOHW-1633S Number of copies: 1 Write speed: 0 KB/s Temp folder: C:\Documents and Settings\DJ\My Documents\Nero Recode (136060264448 bytes free) Direct burning: false Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 14:18:38 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VTS_01 Title Vobs [10377 vobus] 4051.33MB -> 3797.22MB [R 1.00] Video: 3228.31MB, extra: 568.91MB Audio: 5 streams 0. 0. Dolby Digital 5.1-ch English 291.46MB [enabled] 1. 1. Dolby Digital 2-ch French 124.51MB [disabled] 2. 2. Dolby Digital 2-ch Spanish 125.10MB [disabled] 3. 3. Dolby Digital 2-ch English 124.84MB [enabled] 4. 4. Dolby Digital 2-ch English 124.78MB [enabled] Subpicture: 2 streams 0. 0. English - Normal Captions 7.55MB [enabled] 1. 1. Spanish 4.50MB [disabled] 14:18:39 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 14:18:39 File burn_dvdfiles.cpp, Line 479 Compile DVD: burning 2282925 sectors (1944239 required) 14:18:39 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4458.84MB (3797.34MB obtained) 14:18:39 File burn_dvdfiles.cpp, Line 524 Compiling DVD Volume started 14:25:08 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_2.VOB 14:31:21 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_3.VOB 14:37:37 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_4.VOB 14:41:28 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 4051.33MB -> Expected 3797.22MB -> Output 3794.21MB Finished error -3.00MB Ratio encoded = 73 Original encoded = 10304 Slide encoded = 0 StillImage encoded = 0 Output extra size = 573.85MB Source video size = 3220.55MB Pictures Modified [I 1] [P 5] [B 468] 14:41:53 File burn_dvdfiles.cpp, Line 547 Compile DVD: completed successfuly (3794.34MB) 14:41:57 File NeroRecorderBase.cpp, Line 1096 Burning 8 files with total size of 3978651648 bytes on hard disk 14:41:57 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 14:43:03 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD-R 1 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Internal Version: 6, 6, 0, 18e Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BPSA - HA 0 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CD-S480/A5 atapi Port 0 ID 1 DMA: On DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 ASUS CD-S480/A5 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515376kB) Free physical memory: 223MB (228652kB) Memory in use : 55 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.12.2006 NeroAPI 2:43:03 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 2:43:03 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 2:43:03 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 2:43:03 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 2:43:03 PM #5 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1633S running 2:43:03 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:43:03 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:43:03 PM #8 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 2:43:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1943247 (431:49.72, 3795MB) 2:43:04 PM #10 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 2:43:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R Disc Manufacturer: MXL RG - 03 Disc Application Code: 64, Disc Physical Code: 193 2:43:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:43:04 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1943248 (1943248) = #1943248/431:49.73 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1943248 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 2:43:04 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3979771904, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1943248 | lead-out | 1 | 0x41 | 0x00 2:43:04 PM #15 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 2:43:04 PM #16 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 2:43:04 PM #17 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 2:43:04 PM #18 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 8x (11,080 KB/s) 2:43:04 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:43:04 PM #20 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 2:43:04 PM #21 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 2:43:04 PM #22 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 2:43:04 PM #23 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:43:45 PM #24 Text 0 File Cdrdrv.cpp, Line 1288 14:43:45.968 - LITE-ON DVDRW SOHW-1633S\H0 T0 : Queue again later 2:45:55 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05E90000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x02 0x8D 0x40 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 2:45:55 PM #26 CDR -1135 File Writer.cpp, Line 311 Write error 2:45:55 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:45:56 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 2:45:56 PM #29 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 167231 2:46:06 PM #30 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 14:46:08 File NeroRecorderBase.cpp, Line 906 Burn failed (3) 14:46:08 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit
Oh yeah btw, still can't do anything about updating the firmware. I tried it again before I came on the site here. I posted the error message a few blocks up. `
