Been coming here for years but this is my first post because I have always been able to use these posts to solve problems. I'm having problems burning dvds. Sometimes it works sometimes it doesn't. I found out some problems like the DMA was off and I fixed that. Nero is not working on the burn process. It doesn't matter if I recode and try to put it on single layer or if I copy at normal size and use dual layer. It has worked many times before whether it needed to be encrypted or not. some of the dvds do not have the copyright protection but it still is not working. I have included the log file to see if anyone with knowledge in this matter can help. Thanks so much. I do notice that one area does say check supported media is disabled but do not know if this is causing the problem. This is trying all types of media whether it is verbatim or whatever. I have asked on other forums but the replies I'm getting are just get rid of nero Is there anything I can do besides this? Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM ahead WinASPI: File 'E:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM Nero Version: 6.6.0.14 Internal Version: 6, 6, 0, 14d (Nero Express) Recorder: <SONY DVD RW DRU-810A> Version: 1.0f - HA 5 TA 0 - 6.6.0.14 Adapter driver: <atapi> HA 5 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD RW DRU-810A >Version: 1.0f - HA 5 TA 0 - 6.6.0.14 Adapter driver: <atapi> HA 5 === Scsi-Device-Map === DiskPeripheral : WDC WD2500JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === SONY DVD RW DRU-810A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095532kB) Free physical memory: 1507MB (1544024kB) Memory in use : 26 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.2.2008 ===== Disc-Copy over image - 1st step : Copy to image ... 6:53:55 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 6:53:55 AM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 6:53:55 AM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc Last LBA on layer 0 = 1686623 / 0x19BC5F / 3294MB S01 T01 Con 0x14 Start 0 Len 2923744 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 6:53:55 AM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2923744 = 2923744, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 6:53:55 AM #5 Text 0 File Burncd.cpp, Line 3230 Turn on Disc-At-Once, using DVD media 6:53:55 AM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2923743 (649:43.18, 5710MB) 6:53:55 AM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 6:53:55 AM #8 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 6:53:55 AM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:53:55 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2923744 (2923744) = #2923744/649:43.19 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2923744 blocks [Image Recorder] -------------------------------------------------------------- 6:53:55 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5987827712, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2923744 | lead-out | 1 | 0x41 | 0x00 6:53:55 AM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 6:53:55 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:02:31 AM #14 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 2923744 (2C9CE0h), lenght 0 blocks 7:02:31 AM #15 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:02:31 AM #16 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 7:02:39 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 7:02:39 AM #2 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-810A running 7:02:39 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 5987827712 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=649:43.19 ( 2923744) RecDep=0x00 LBRK: Last LBA on layer 0 = 1686623 / 0x19BC5F / 3294MB MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <E:\temp nero folder\TempImage.nrg> 7:02:39 AM #4 Text 0 File Burncd.cpp, Line 3230 Turn on Disc-At-Once, using DVD media 7:08:43 AM #5 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 2923743 (649:43.18, 5710MB) 7:08:43 AM #6 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 7:08:43 AM #7 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: SONY DVD RW DRU-810A, Media type: DVD+R9 Double Layer 7:08:43 AM #8 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.) 7:08:43 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2923744 (2923744) = #2923744/649:43.19 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2923744 blocks [SONY DVD RW DRU-810A] -------------------------------------------------------------- 7:08:43 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5987827712, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2923744 | lead-out | 1 | 0x41 | 0x00 7:08:43 AM #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 7:08:43 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:08:43 AM #13 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03430600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 7:08:43 AM #14 Text 0 File DVDPlusDualLayer.cpp, Line 595 L0 Data Zone Capacity set to 1686624 (19BC60h, 3294MB) -> OK, confirmed setting 7:08:43 AM #15 CDR -1205 File DVDPlusDualLayer.cpp, Line 622 Burning Layer 1 7:08:43 AM #16 Text 0 File DVDPlusDualLayer.cpp, Line 632 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 7:08:43 AM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03430600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 7:08:43 AM #18 CDR -1207 File DVDR.cpp, Line 4938 Book Type automatically set to: Current recorder setting 7:08:43 AM #19 Text 0 File DVDPlusRW.cpp, Line 655 Start write address at LBA 0 DVD high compatibility mode: Yes 7:09:08 AM #20 SCSI -1176 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03540000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x01 7:09:08 AM #21 CDR -1176 File Writer.cpp, Line 311 Session fixation error 7:09:08 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:09:09 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 7:09:09 AM #24 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 5, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x03 7:09:09 AM #25 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 7:09:09 AM #26 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 7:09:09 AM #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I am not gonna say get rid of Nero, just use something else to burn, like ImgBurn . If ImgBurn is successful, then we can blame Nero. If Nero became buggy,it should updated to the latest version, 6.6.1.18. Use Nero 6 Clean Tool from Nero's web site to remove current Nero before you install the update. Use good media( you said you have Verbatim). Another cause could be your burner's firmware, faulty burner/cables.
