Hi room I've just had new virgin internet fitted and phone 100 meg done speed check and I'm getting 109 so all good No TV package I'm using krpytview a780 which has a splitter one to moderm one to kryptview box . I had the same set up many years ago and it was very stable , I have noticed that all channel will go off ever 10 mins or so for 10secound then come back on , when I fitted the splitter to virgin box I took this part off i was wondering weather I should of left it on here it is
Technetix Group Limited e: sales@technetix.com w: www.technetix.com Overview • Single output isolator • Modem Safe™ surge protection and intermodulation reduction solution • CPD Safe™ - Nickel plated, zinc die-cast housing and tin-nickel plated, machined brass input connector with silver plated F-inner spring • Excellent RF performance • Exceeds EN Class A screening requirements • Low insertion loss • Low leakage current • Compact design TRIS-1002L fully isolated wall outlet Isolators (frequently referred to as system outlets) are used to separate the in-home installation or subscriber equipment from the CATV network. They prevent hazardous voltages from being transferred to in-home installations. Technetix supplies two major types of isolator; fully and semi-isolated system outlets. The TRIS series comprises fully isolated system outlets developed to meet the needs of the European market. They incorporate high voltage capacitors that provide isolation to both the inner and the outer conductors of the coaxial connectors. There are a variety of one, two and three port isolators in the TRIS-series as well as many accessories such as ABS housings, adaptor plates and push-on filters. The TRIS-1002L single output isolator has a nickel plated, zinc die-cast housing and a tin-nickel plated, machined brass input connector. The material of the inner spring has been designed specially for connecting coax cables with an inner core of between 0.51 and 1.20 mm. It retains this elasticity and provides effective clamping force even when varying thicknesses of inner conductor are connected in succession. Modem Safe Modem Safe is a highly effective surge protection solution for sensitive network and in-home CPE. Based on passive circuits, the technology does not rely on discharge tubes, extending the lifespan of the solution. • Blocks high and low voltage pulses and unwanted DC voltages • Prevents internal ferrites within the product from becoming magnetised (avoiding deterioration in the performance of CPE) • Drives fewer reported faults • Improves customer service • Reduces truck rolls CPD Safe CPD (Common Path Distortion) is well known for producing signal interference on networks. It is caused by electrolytic corrosion or the oxidisation of dissimilar metals when in close contact. CPD Safe technology protects against CPD: • Removes a primary cause of CPD • Reduces signal interference on the network • Drives fewer reported faults • Reduces truck rolls • Improves customer service Nov/2012 - Version final 1.0 Isolators Technetix Group Limited e: sales@technetix.com w: www.technetix.com Specifications © Copyright 2012 Technetix Group Limited. All rights reserved. This document is for information only. Features and specifications are subject to change without notice. Technetix, the Technetix logo, Ingress Safe, Modem Safe and certain other marks and logos are trade marks or registered trade marks of Technetix Group Limited in the UK and certain other countries. Other brand and company names are trade marks of their respective owners. Technetix protects its technology and designs by registering patents, trade marks and designs in Europe and certain other countries. TRIS-1002L fully isolated wall outlet Nov/2012 - Version final 1.0 Isolators MHz Min Typ Max Equipment passband 5 - 1000 Insertion loss (dB) In -> Out 0.3 - 1 20 5 - 10 0.0 0.3 0.6 10 - 40 0.0 0.2 0.4 40 - 470 0.0 0.2 0.4 470 - 862 0.1 0.4 0.7 862 - 1000 0.1 0.4 0.7 Return loss (dB, min) All ports 5 - 50 20.0 50 - 1000 18.0 Screening efficiency (dB, min)1 8 - 10 70.0 10 - 12 80.0 12 - 300 85.0 300 - 470 80.0 470 - 1000 75.0 Galvanic isolation 2120 V DC (mA, max)2 Inner (input) - Inner (output) Outer (input) - Outer (output) 0.2 Galvanic isolation 230 V AC (mA, max)2 Inner (input) - Inner (output) Outer (input) - Outer (output) 2.0 Intermodulation p+q (dB, min) No surge3 25 V surge4 1 kV surge5 -120.0 -120.0 -120.0 Surge Class conformance6, 7 1 kV 1.2/50μS Connectors8 All ports F-female Material Housing Nickel plated zinc die-cast F-spring Silver plated beryllium copper Impedance (Ohm, typ) 75 Dimensions (mm) L x H x D 60.0x38.0x20.0 Equipment approval CE Remarks All specifications are measured at room temperature Operating frequency range 10 to 1000 MHz 1 Test methods for frequencies according to EN 50083-2 2006. Operating frequency ranges: 10-1000 MHz according to IG 56620 01 2 Tested according to EN 60728-11 2005 3 Two carriers (60 and 65 MHz) output to output @ 120 dBμV/60dBmV, before surge 4 Two carriers (60 and 65 MHz) output to output @ 120 dBμV/60dBmV, after 10 pulses (25 V/1.2μs rise time/500μs duration) at input port 5 Two carriers (60 and 65 MHz) output to output @ 120 dBμV/60dBmV, after 1 pulse (1 kV 1.2μs/50μs, IEC 61000-4-5 2005 level 2) at input port 6 Tested according to IEC 61000-4-5 2005 7 Additional protection via Modem Safe circuit allows a maximum output of 35 V 8 F-spring test pin acceptance 0.51mm min to 1.2mm max Ordering information Item Name Article number TRIS-1002L 19002917
