Can anybody help? I've been everywhere, but to no avail...... _____________________________________________________________________ Windows 98 4.10 IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/03 8:13:44 AM Nero version: 6.0.0.0 Recorder: <COMBO IDE5216CO> Version: 0K52 - HA 0 TA 1 - 6.0.0.0 Adapter driver: <ESDI_506> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <COMBO IDE5216CO >Version: 0K52 - HA 0 TA 1 - 6.0.0.0 Adapter driver: <ESDI_506> HA 0 COMBO IDE5216CO (Target 1, E: Autoinsert Off, DMA On, Disconnect Off, SyncDataXfer Off Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260276kB) Free physical memory: 14MB (15028kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.4.2006 Audio CD 2:26:30 PM #1 CDR -1175 File Cdrdrv.cpp, Line 1210 Internal trace Resending of command failed after 40000ms CDB Data[hex]: 51 00 00 00 00 00 00 00 20 00 00 00 2:26:30 PM #2 SCSI -1169 File Cdrdrv.cpp, Line 1211 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x05775000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 2:29:11 PM #3 CDR -1175 File Cdrdrv.cpp, Line 1210 Internal trace Resending of command failed after 30000ms CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00 2:29:11 PM #4 SCSI -1169 File Cdrdrv.cpp, Line 1211 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0819F7D8 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x10 0xC7 0x0A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 2:29:41 PM #5 CDR -1175 File Cdrdrv.cpp, Line 1210 Internal trace Resending of command failed after 30000ms CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00 2:29:41 PM #6 SCSI -1169 File Cdrdrv.cpp, Line 1211 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0819F774 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 2:30:11 PM #7 CDR -1175 File Cdrdrv.cpp, Line 1210 Internal trace Resending of command failed after 30000ms CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00 2:30:11 PM #8 SCSI -1169 File Cdrdrv.cpp, Line 1211 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0819F774 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 2:30:41 PM #9 CDR -1175 File Cdrdrv.cpp, Line 1210 Internal trace Resending of command failed after 30000ms CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00 2:30:41 PM #10 SCSI -1169 File Cdrdrv.cpp, Line 1211 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0819F774 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 2:31:12 PM #11 CDR -1175 File Cdrdrv.cpp, Line 1210 Internal trace Resending of command failed after 30000ms CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00 2:31:12 PM #12 SCSI -1169 File Cdrdrv.cpp, Line 1211 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0819F774 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0 2:31:12 PM #13 CDR -1169 File Writer.cpp, Line 335 Logical unit not ready, operation in progress 2:31:12 PM #14 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 2:31:42 PM #15 CDR -1175 File Cdrdrv.cpp, Line 1210 Internal trace Resending of command failed after 30000ms CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00 2:31:42 PM #16 SCSI -1169 File Cdrdrv.cpp, Line 1211 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x01D6ABC0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x 2:32:12 PM #17 CDR -1175 File Cdrdrv.cpp, Line 1210 Internal trace Resending of command failed after 30000ms CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00 2:32:12 PM #18 SCSI -1169 File Cdrdrv.cpp, Line 1211 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x01D6ABC0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x08 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x 2:32:12 PM #19 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 2:32:12 PM #20 CDR -1169 File WriterStatus.cpp, Line 165 Logical unit not ready, operation in progress 2:32:12 PM #21 TRANSFER -39 File WriterStatus.cpp, Line 165 Could not perform EndSession 2:32:42 PM #22 Phase 38 File dlgbrnst.cpp, Line 1818 Burn process failed at 16x (2,400 KB/s) Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 2:55:38 AM File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2224, size=24430 bytes, created 10/12/99 12:53:42 PM File '..\System32\Drivers\1394bus.sys': Ver=4.10.2222, size=37328 bytes, created 4/23/99 10:22:00 PM File '..\System32\Drivers\Ohci1394.sys': Ver=4.10.2222, size=35648 bytes, created 4/23/99 10:22:00 PM File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2222, size=9360 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2222, size=9825 bytes, created 4/23/99 10:22:00 PM File '..\System32\Drivers\Sbp2port.sys': Ver=4.10.2222, size=32592 bytes, created 4/23/99 10:22:00 PM File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM Registry Keys:
Im using Sony CD-Rs. To tell you the truth, I tried to uninstall NERO, and put Roxio back on my PC, but it did the exact same thing. I even tried a different media brand. I updated the CD Rom firmware and even uninstalled it and let windows re-install it. I cant figure this out to save my life.
I even NERO pinged! NeroPing V1.10 Initialize Win Aspi32........Ok Start scanning device..... Host Adapter = 0 [Target ID = 1] 'COMBO IDE5216CO 0K52 ' Finish scanning..............Ok
I think you should update your Nero and see it that helps. Current version: 6.6.1.4 http://ww2.nero.com/nero6/us/nero-up.php More RAM would be helpful as well. I don't know if you have room for more though. You may want to try stopping unneeded processes running in the background to free up more RAM.
@fasfrank, this version of Nero is a problem one so it is suggested to change or upgrade to 6.6.0.18 from either of these links http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe
I have just been informed that those links to 6.6.0.18 are no longer active, try here http://www.listsoft.com/programs/1983/?fileid=3
and by the way...... Roxio and Nero don't mix..... so if you want Nero to work properly I would use Roxio Zapper and take it completely off your system! then do a registry clean up, defrag hard drive, and reboot..... then install Nero again! http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml I'm sure it will work just fine after you take out Roxio!
@I-hoe, the log file doesnt show that Roxio is installed, but yes I do agree that Roxio and Nero don't go together, Cheers
I was just going what sinkdog said: maybe it's time to clean up the computer (clean registry, compact & defragement the registry, defrag hard drive, empty temp files, find and remove spyware, etc.) I keep my clean as a whistle and running like new!! All my programs work best that way, fast and to it's optimum.
I have these versions at my website so you could also download from there: Burning ROM: http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe NeroVision: http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe Gwendolin is right and you would be better off using these. You will only need the first one.
