I have a NEC DVD+-RW ND-6650A, trying to burn dual layer on DVD-R DL. getting the old disk at once error. Log is copy/pasted below. updated firmware to latest, stil no luck...any help is really appriciated. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 5:23:24 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 Recorder: <_NEC DVD+-RW ND-6650A> Version: 103C - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD+-RW ND-6650A>Version: 103C - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Hitachi HTS721060G9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6650A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1015MB (1039740kB) Free physical memory: 441MB (452244kB) Memory in use : 56 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.12.2006 UDF compilation 3:47:56 PM #1 Text 0 File Isodoc.cpp, Line 6411 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : pure UDF Revision : 1.02 UDF Partition Type : physical 3:47:56 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 3:47:56 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 3:47:58 PM #4 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 3:47:58 PM #5 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 4172815 (927:17.40, 8150MB) Last address to be written: 3094687 (687:42.37, 6044MB) 3:47:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 3:47:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD-R Disc Manufacturer: RITEKP - 01 Disc Application Code: 2, Disc Physical Code: 145 3:47:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:47:58 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3094688 (3094688) = #3094688/687:42.38 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3094688 blocks [D: _NEC DVD+-RW ND-6650A] -------------------------------------------------------------- 3:47:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: _NEC DVD+-RW ND-6650A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6337921024, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3094688 | lead-out | 1 | 0x41 | 0x00 3:47:58 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:47:58 PM #12 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 3:47:58 PM #13 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 3:47:58 PM #14 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 3:47:58 PM #15 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 2.4x (3,324 KB/s) 3:47:58 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:47:58 PM #17 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 3:47:58 PM #18 Text 0 File MMC.cpp, Line 21611 Set BUFE: JustLink -> ON 3:47:59 PM #19 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 3:47:59 PM #20 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: - (6), Extended Part Version: 3.0 (48) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCCD4F h End Sector Number in Layer 0: 22EF5F h (LBN: 1FEF5F h, 4087 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 10 00 00 00 00 00 00 - 00 00 00 30 00 00 00 00 ...........0.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:47:59 PM #21 SPTI -1046 File SCSIPassThrough.cpp, Line 323 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x06 CDB Data: 0x53 00 00 00 00 00 2F 38 A0 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06 3:47:59 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc D: _NEC DVD+-RW ND-6650A 3:47:59 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 3:47:59 PM #24 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 6:02:46 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/12/2005 6:54:10 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi. Edit your post by clicking the paper/pencil icon in the upper right of your post to remove your Nero serial number beginning 5C.... Ritek DL disks can be hard to burn for some burners. -R disks are difficult to burn for video for many burners and aren't recognized by many standalone players. It's best to use +R DL disks. Verbatim +R DL disks seem to be the best all around. Nero is not a good DL disk burner. ImgBurn or DVD Decrypter are superior imo. ImgBurn is kept up to date. http://www.imgburn.com ImgBurn guides are here: http://forum.imgburn.com/index.php?s=69da33562ddfccab97ab13a94224de77&showforum=4 The illegal disk message may indicate your burner not recognizing the disk. Your version of Nero is not up to date. Updates are here: http://ww2.nero.com/enu/Downloads.html
Hi mcian 1st let's edit out that serial number - at the top of log and begins w/ 5C. Don't need someone else using it. Nero Version: 7.0.1.2 Update Nero to 7.5.9.0a Bunch of fixes and enhancements since the version you have. Some may have been for dual layer burning. Might help. link Disc Manufacturer: RITEKP - 01 Not the best for dual layer media. Even though the firmware is update to date it still doesn't like this discs. Cause you also have this in the log Illegal disc For dual layer use Verbatim only. I would also look for rated 4x or lower dual layer media on this drive - it might not do well w/ the newer 8x dual layer media. Last address to be written: 3094687 (687:42.37, 6044MB) Might also want to consider putting this on a single layer disc. Compression won't be bad. Just use Recode. edit to add: Hey laddyboy - You beat me
edited...thanks! (didn't realize that was the serial!) Sounds like the problem is likely to be the media, then. I'll try the other burning software, just to see ifthat works.
IMGBurn won't let me add the avi file I have of when I went skydiving, because it is 6 plus gigs...needs to be udf, IMGburn seems to want only iso...I'll try updating Nero and see if that will fix it.
I'm thinking it's the media too. You could run this files thru Vision and pick 'image recorder' instead. This will create an .nrg file that ImgBurn will burn.
Oh Vision is an application in Nero that converts avi's, etc to a dvd complaint file. So I'm guessing you were burning the avi's as is - no conversion. 6 gigs of avi would take quite a bit to convert and the size after converted may be huge - so this may not be an option.
Well, I not only tried different media, but a different type. I was having problems with the DVD-R DL, saying it couldn't start the disk at once. Now I have the DVD+R DL (TDK) and I'm getting an error that says, "could not perform end of disk at once." It seems to be at the beginning of burning the second layer, if I'm reading the error log correctly (pasted below). May be premature, but I'm thinking the problem isn't the media. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 5:23:24 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 Recorder: <_NEC DVD+-RW ND-6650A> Version: 103C - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD+-RW ND-6650A>Version: 103C - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Hitachi HTS721060G9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6650A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1015MB (1039740kB) Free physical memory: 352MB (361440kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.12.2006 UDF compilation 4:11:15 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 4:11:15 PM #2 Text 0 File Isodoc.cpp, Line 6509 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical 4:11:16 PM #3 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 4:11:16 PM #4 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3094687 (687:42.37, 6044MB) 4:11:16 PM #5 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 4:11:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD+R9 Double Layer 4:11:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:11:16 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3094688 (3094688) = #3094688/687:42.38 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3094688 blocks [D: _NEC DVD+-RW ND-6650A] -------------------------------------------------------------- 4:11:16 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [D: _NEC DVD+-RW ND-6650A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6337921024, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 3094688 | 0 | 0x00 0 | 1 | 1 | 0x41 | 3094688 | 0 | 0x00 3094688 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 4:11:16 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 4:11:16 PM #11 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 4:11:16 PM #12 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 4:11:16 PM #13 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 4:11:16 PM #14 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 2.4x (3,324 KB/s) 4:11:16 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:11:16 PM #16 Text 0 File DVDPlusDualLayer.cpp, Line 475 Disc finalized, LBA total Image size: 3094688 (6044MB), Last LBA L0: 1547359 (3022MB) 4:11:49 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 640 L0 Data Zone Capacity set to 1547360 (179C60h, 3022MB) -> OK, confirmed setting 4:11:49 PM #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 667 Burning Layer 1 4:11:49 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 677 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 4:11:49 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x065530c0: Len x804 4:11:49 PM #21 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 4:27:29 PM #22 CDR -1206 File DVDPlusDualLayer.cpp, Line 1950 Burning Layer 2 4:27:29 PM #23 Text 0 File DVDPlusDualLayer.cpp, Line 1961 Perform layer 1 to 2 jump before writing at address 1547360 (179C60h) 4:28:11 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 17 D1 40 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x089935c0: Len x10000 0x5D 89 CF E1 BF C0 66 12 93 97 6C 0F F7 90 F1 85 0x0B B8 00 3F F1 32 75 3F 91 2C F7 80 E3 89 C5 D8 0xEA E2 F9 89 8B 13 46 8B F8 05 A0 51 8F 89 C6 43 4:28:11 PM #25 CDR -1135 File Writer.cpp, Line 299 Write error D: _NEC DVD+-RW ND-6650A 4:28:11 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 4:28:11 PM #27 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03 4:28:11 PM #28 CDR -1176 File WriterStatus.cpp, Line 162 Session fixation error D: _NEC DVD+-RW ND-6650A 4:28:11 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 4:28:12 PM #30 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 2.4x (3,324 KB/s) 4:28:13 PM #31 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 4:28:17 PM #32 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 4:28:17 PM #33 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 6:02:46 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/12/2005 6:54:10 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hello. As I posted above, using Nero to burn DL disks is not a wise choice. ImgBurn is a better choice. The TDK media is either made by Ricoh or Ritek. You may be using the same media as before but under a different brand name. Use Verbatim +R DL for best results. The media isn't identified in the log for whatever reason. Laptop burners are more problematic than desktop burners. If you're burning NeroVision compilations or Recode compilations, either use the Image Recorder to create a Nero nrg image file and burn with ImgBurn or create a folder of DVD video files (VOBs) and burn with ImgBurn. There's a link to ImgBurn guides in my first post above.
I created an image of the burn project w/ nero, and then used imgburn to burn the actual disk. it did fine w/ the tdk dvd+R DL, but with the Ridata DVD-R DL I get the following error almost immediately after clicking the burn icon: I/O Error! Device:[1:0:0]_NEC DVD+-RW ND- yada yada scsiStatus: 0x02 Interpretation: Check Condition CDB: buncha numbers and letters sense area: buncha numbers and letters interpretation: Cannot Format Medium - Incompatible Medium. Glad it is working, but I would like to be able to use both types of media...any ideas?
Very few people use -R DL media because most standalone players will not recognize and play back that media type. Your burner apparently doesn't recognize and like that particular -R DL media. I'm using a hacked firmware 2.42 on my laptop burner, but I don't use and never have used -R DL media. NEC firmware, official and hacked can be found here: http://www.micheldeboer.nl/firmware/
