Can't burn DVD's using Nero 6

I've been burning DVD's for a couple of years now with no major issues. My Asus DVD drive is quite old now and I'm wondering if that's the route of my problem. I'm hoping someone can help. First of all I've always used Nero Express and the "burn DVD files" option. It's what's always worked for me. One thing I've noticed is that it's taking ages to read the disc in the first place. Then one of 2 things happens. I get a "not responding" problem or it hangs about 3 quarters of the way through reading. I've noticed a clicking noise from the drive at this point today. Do I need a new burner? Any help will be greatly appreciated. Thank you.

 

clicking and old drive = maybe new drive time.

 

Thanks for your reply. Is there any definitive way of telling that this is the problem?

 

things i would do

uninstall drive from device manager and uninstall controllers for the drive, that 2 uninstalls

reboot pc now

update firmware http://discinfo.rpc1.org/ use search VEIW/FIRMWARE update

use another software what is your full project?

do you have a nero log file to paste here?

also try updating motherboard ide drivers if your drive is ide/atapi not usb

what discs you useing the dye code info not brand name pls

uninstall nero with the nero v6 removal clean tool, then install again

 

I'll get back to you tomorrow as that seems a complicated procedure. I'm fairly clued up but would like some guidance in case I run into trouble! Cheers!

 

if you need any specific help just shout now i know your not to sure, i will go into detail on whatever your not sure on...

 

I know how to uninstall the drive but how about the controllers?

 

same thing in device manager

 

Would this be a drive problem given the fact that I can play DVD's in it?

 

just trying to go through things we know here

do you have a nero log file? we can read up on.

 

I'm unable to post a log as it doesn't reach the end of the project.

 

Hello again. I recently had a "power calibration error" and it turned out that updating the firmware on my burner did the trick. It's been operating fine (four months) - until now.

I'm suspecting the problem I'm having is the media - as I've coastered 5 DVD+R DL in a row - all with different burns/files. I haven't had problems with regular (dvd-5) burning.

Anyway, if one of you log readers could give this a look, I'd really appreciate it (Thanks, in advance):


Project type: Copy entire DVD
Target size: DVD9 (4152290)

22:09:09 File LangStreamPatcher.cpp, Line 56
Command table patching started...

22:09:09 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!

Burn settings:
Target: LITE-ON DVDRW LH-20A1H
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Temp (17366409216 bytes free)
Direct burning: false
Target media: DVD DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: true

22:09:38 File burn_dvdfiles.cpp, Line 231
Compile DVD: init

VMG Menus Vobs [8 vobus] 6.14MB -> 6.14MB [R 1.00]
Video: 5.83MB, extra: 0.32MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 0.30MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]

VTS_01 Menus Vobs [144 vobus] 79.49MB -> 79.49MB [R 1.00]
Video: 78.25MB, extra: 1.24MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 0.86MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.10MB [enabled]

VTS_01 Title Vobs [10976 vobus] 7465.35MB -> 7465.35MB [R 1.00]
Video: 7002.48MB, extra: 462.87MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 441.43MB [enabled]
Subpicture: 0 streams

22:09:38 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1

22:09:39 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD+R DL

22:09:39 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 4152413 sectors (4173824)

22:09:39 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 4152413 sectors (3866229 required)

22:09:39 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 8110.18MB (7551.23MB obtained)

22:09:39 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started

22:09:39 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs

VMG Menus Vobs:
Original 6.14MB -> Expected 6.14MB -> Output 6.14MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 8
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.32MB
Source video size = 5.83MB
Pictures Modified [I 0] [P 0] [B 0]

22:09:45 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Menus Vobs

VTS_01 Menus Vobs:
Original 79.49MB -> Expected 79.49MB -> Output 79.49MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 144
Slide encoded = 0
StillImage encoded = 0
Output extra size = 1.24MB
Source video size = 78.25MB
Pictures Modified [I 0] [P 0] [B 0]

22:10:36 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_2.VOB

22:11:20 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_3.VOB

22:12:03 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_4.VOB

22:12:48 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_5.VOB

22:13:31 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_6.VOB

22:14:14 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_7.VOB

22:14:58 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_8.VOB

22:15:04 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs

VTS_01 Title Vobs:
Original 7465.35MB -> Expected 7465.35MB -> Output 7465.35MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 10976
Slide encoded = 0
StillImage encoded = 0
Output extra size = 462.87MB
Source video size = 7002.48MB
Pictures Modified [I 0] [P 0] [B 0]

22:15:08 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (7551.23MB)

22:15:08 File NeroRecorderBase.cpp, Line 1096
Burning 14 files with total size of 7918036992 bytes on hard disk

22:15:08 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1

1A20-020N-0130-1842-1128-1933*



Windows XP 5.1

IA32

WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 12:48:20 AM

ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM



NT-SPTI used

Nero API version: 6.6.1.15

Using interface version: 6.6.0.9

Installed in: C:\Program Files\Ahead\Nero\

Application: Ahead\Nero Recode
Internal Version: 6, 6, 1, 15


Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0D - HA 1 TA 1 - 6.6.1.15

Adapter driver: <IDE> HA 1

Drive buffer : 2048kB

Bus Type : via Inquiry data (1) -> ATAPI, detected: ?

Connected to MMC as unknown drive with class-nr : 1

Drive is autodetected - recorder class: Std. MMC recorder



=== Scsi-Device-Map ===

DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 0 DMA: On

CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On

CdRomPeripheral : LITE-ON DVDRW LH-20A1H atapi Port 1 ID 1 DMA: On



=== CDRom-Device-Map ===

LITEON DVD-ROM LTD163 D: CDRom0

LITE-ON DVDRW LH-20A1H E: CDRom1

=======================



AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

ShowDrvBufStat : 0

BUFE : 0

Physical memory : 1022MB (1047024kB)

Free physical memory: 681MB (698068kB)

Memory in use : 33

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)



1.4.2008

NeroAPI

10:15:09 PM #1 Phase 112 File APIProgress.cpp, Line 275

DVD-Video files reallocation started



10:15:09 PM #2 Phase 114 File APIProgress.cpp, Line 275

DVD-Video files reallocation completed (no file modified)



10:15:09 PM #3 Phase 111 File APIProgress.cpp, Line 275

DVD-Video files sorted



10:15:09 PM #4 Text 0 File SCSIPTICommands.cpp, Line 403

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL



10:15:09 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3312

First writeable address = 0 (0x00000000)



10:15:09 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312

First writeable address = 0 (0x00000000)



10:15:09 PM #7 Text 0 File Burncd.cpp, Line 3316

Turn on Disc-At-Once, using DVD media



10:15:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 281

Last possible write address on media: 4173823 (927:30.73, 8151MB)

Last address to be written: 3866783 (859:17.08, 7552MB)



10:15:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 293

Write in overburning mode: NO (enabled: CD)



10:15:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 2616

Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD+R9 Double Layer

Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66

Disc Application Code: 0, Extended Information Indicators: 3



10:15:09 PM #11 Text 0 File DlgWaitCD.cpp, Line 459

>>> Protocol of DlgWaitCD activities: <<<

=========================================



10:15:09 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 814

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 ()

2 indices, index0 (150) not provided

original disc pos #0 + 3866784 (3866784) = #3866784/859:17.9

relocatable, disc pos for caching/writing not required/ required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3866784 blocks [LITE-ON DVDRW LH-20A1H ]

--------------------------------------------------------------



10:15:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1013

Prepare recorder [LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc fixated

Tracks 1 to 1:

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7919173632, ISRC ""

DAO layout:

===========

__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________

0 | lead-in | 0 | 0x41 | 0x00

0 | 1 | 0 | 0x41 | 0x00

0 | 1 | 1 | 0x41 | 0x00

3866784 | lead-out | 1 | 0x41 | 0x00



10:15:10 PM #14 Text 0 File SCSIPTICommands.cpp, Line 208

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME



10:15:10 PM #15 Phase 24 File APIProgress.cpp, Line 275

Caching of files started



10:15:10 PM #16 Text 0 File Burncd.cpp, Line 4158

Cache writing successful.



10:15:10 PM #17 Phase 25 File APIProgress.cpp, Line 275

Caching of files completed



10:15:10 PM #18 Phase 36 File APIProgress.cpp, Line 275

Burn process started at 8x (11,080 KB/s)



10:15:10 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2717

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0



10:16:15 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 178

CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00

Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24

Buffer x082d0180: Len x804



10:16:15 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 631

L0 Data Zone Capacity set to 1938000 (1D9250h, 3785MB) -> OK, confirmed setting



10:16:15 PM #22 CDR -1205 File DVDPlusDualLayer.cpp, Line 658

Burning Layer 1



10:16:15 PM #23 Text 0 File DVDPlusDualLayer.cpp, Line 668

Start writing layer 1 at address 0 (0h)

Recording mode: unknown Recording Mode



10:16:15 PM #24 Text 0 File Cdrdrv.cpp, Line 8737

---- DVD Structure: Physical Format Information (00h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD+R DL (14), Part Version: 1.0x (1)

Disc Size: 120 mm, Maximum Rate: <not specified> (F h)

Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable

Linear Density: 0,293 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

End Physical Sector Number of Data Area: FCFFFF h

End Sector Number in Layer 0: 20924F h (LBN: 1D924F h, 3785 MB)

Data in Burst Cutting Area (BCA) does not exist

Disc Application Code: 0 / 0 h

Extended Information indicators: 3 h

Disc Manufacturer ID: RITEK...

Media type ID: S04

Product revision number: 66

Number of Physical format information bytes in use in ADIP up to byte 63: 64

Media Specific [16..63]:

00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 42 40 ...RITEK...S04B@

25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %7..,l.,l......

02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................



10:16:16 PM #25 Text 0 File DVDPlusRW.cpp, Line 666

Start write address at LBA 0

DVD high compatibility mode: Yes



10:22:35 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 178

CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x0C

Sense Qual: 0x00

CDB Data: 0x2A 00 00 10 29 80 00 00 20 00 00 00

Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C

Buffer x23715b40: Len x10000

0x00 00 01 BA 44 0F 04 6B 8D 2D 01 89 C3 F8 00 00

0x01 E0 07 EC 81 00 00 8C B5 38 0F E7 0B 78 81 45

0x4D 98 46 1E 22 C8 C1 50 06 C1 D0 D3 C0 EC 1C F0



10:22:35 PM #27 CDR -1135 File Writer.cpp, Line 281

Write error

E: LITE-ON DVDRW LH-20A1H



10:22:36 PM #28 Phase 38 File APIProgress.cpp, Line 275

Burn process failed at 8x (11,080 KB/s)



10:22:36 PM #29 Text 0 File SCSIPTICommands.cpp, Line 253

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME



10:22:38 PM #30 Text 0 File Cdrdrv.cpp, Line 9945

DriveLocker: UnLockVolume completed



10:22:38 PM #31 Text 0 File SCSIPTICommands.cpp, Line 403

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL





Existing drivers:

File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM

File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/4/2006 9:42:42 PM

File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 12:48:20 AM

File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 4:53:22 PM (Prassi/Veritas driver for win 2K)

File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 6:15:58 PM (InCD4 driver for win NT/2K/XP)

File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 6:15:56 PM (InCD4 driver for win NT/2K/XP)

File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 6:00:28 PM (InCD4 driver for win NT/2K/XP)



Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)




22:22:41 File NeroRecorderBase.cpp, Line 906
Burn failed (3)

22:22:42 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit

 

uninstall any roxio ETC apps that use this driver CDRALW2K.SYS', then use roxio zap tool to rid registry problems...

then

uninstall nero then use nero clean tool for your version nero to clean registry, then install nero without installing Nero InCD you have 3 drivers for this inCD, they conflict with burning also, and i would update nero too

ok back to ya prob

looks like your drive doeant read your type/brand/dye code very well, try verbatim +DL

also i would dual layer burn with imgburn (guide is on there forum) read/follow it

 

Rotary - thank you very much for your advice. However, I can't help but think I need a new drive as I've never had problems with these discs before.

 

see if the discs from ages ago are the same dye code as the log above

Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66

also i have had instances where a 50 packs of dvdrs 40 are ok, and 10 scrap...

 

Strangely I got past the read stage earlier but then it failed straight away when it went to burn. I've noticed that the discs are 8X as opposed to the 16X discs I was using. I have had successes with these though. Not sure how to obtain the dye code, etc.. Here's the log from the failed burn process:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS DVD-ROM E608 >Version: 1.30 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-ROM E608 atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D D: CDRom0
ASUS DVD-ROM E608 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015284kB)
Free physical memory: 238MB (244620kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.4.2008
UDF/ISO compilation
18:17:00 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

18:17:00 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

18:17:00 #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

18:17:00 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

18:17:00 #5 Text 0 File Reader.cpp, Line 127
Reader running

18:17:00 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-106D running

18:17:00 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

18:17:00 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

18:17:00 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

18:17:42 #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2246879 (499:18.29, 4388MB)

18:17:42 #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

18:17:42 #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: UME01 -
Disc Application Code: 64, Disc Physical Code: 193

18:17:42 #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

18:17:42 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2246880 (2246880) = #2246880/499:18.30
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2246880 blocks [PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------

18:17:42 #15 Text 0 File Burncd.cpp, Line 3747
Can only write at 2x (2,770 KB/s) instead of 2.4x (3,324 KB/s) to current disc.

18:17:42 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4601610240, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2246880 | lead-out | 1 | 0x41 | 0x00

18:17:42 #17 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

18:17:42 #18 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

18:17:42 #19 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

18:17:42 #20 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

18:17:43 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:17:43 #22 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

18:17:43 #23 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON

18:17:43 #24 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

18:17:43 #25 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:17:47 #26 Text 0 File Cdrdrv.cpp, Line 1287
18:17:47.401 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

18:17:51 #27 SCSI -1061 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A380000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9

18:17:51 #28 CDR -1061 File Writer.cpp, Line 311
Internal target failure

18:17:51 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:17:51 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

18:17:51 #31 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 767

18:17:51 #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 18/10/2006 03:00:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 15/08/2007 23:33:10 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

CdRomPeripheral : ASUS DVD-ROM E608 atapi Port 1 ID 1 DMA: Off

your first log DMA was on ok for all 3 drives, so you have a DMA issue

ok

you still have the bad conflicting driver

File

: Ver=8.0.0.212 , size=2560 bytes, created 18/10/2006 03:00:00

use roxio zap tool.

your first disc was ritek now its this - Disc Manufacturer: UME01 -

try some verbatim or TY discs

you say you saw more info this time? well could be you got rid of the InCD that conflicts which is good as its packet writing software, now get rid of CDRALW2K.SYS'

once you used roxio zap tool you may need to uninstall controllers again and drive then reboot pc...

with the DMA you might need an ASPI layer? do this later...

 

Sorry! I'm being blinded by science!

 

use a tool called roxiozap to get rid of this file/driver - CDRALW2K.SYS'

this driver could cause the dma to be off this time round
-----------------------
the 2 types of dvdr you used may not gel well with your drive now, iknow people say used these for ages, but the dye found on dvdr's change brand names dont, so its hard to tell

verbatim and TY tend to stay the same and are the safest bet on dvdr media.
-----------------------
after removing CDRALW2K.SYS' we still have dma off we may need to uninstall controllers from device manager abd the drive and reboot pc

 

Could you provide a link to download Roxiozap please? Also once the controllers and drive are uninstalled will a reboot reinstall them?