Tried to burn my first ISO on Mini-DVD using Nero6 with Benq 1620. It failed at the very beginning. What have I done wrong??? Thanks for your help! Log from Nero: ============== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.1 Recorder: <BENQ DVD DD DW1620> Version: B7C9 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <BENQ DVD DD DW1620 >Version: B7C9 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === BENQ DVD DD DW1620 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 85MB (87864kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.4.2006 Burn DVD Image 11:40:48 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 11:40:48 PM #2 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 11:40:48 PM #3 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2297887 (510:38.37, 4488MB) Last address to be written: 713029 (158:27.04, 1392MB) 11:40:48 PM #4 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 11:40:48 PM #5 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: BENQ DVD DD DW1620, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 225 11:40:48 PM #6 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:40:48 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1) 2 indices, index0 (150) not provided original disc pos #0 + 713030 (713030) = #713030/158:27.5 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 713030 blocks [BENQ DVD DD DW1620] -------------------------------------------------------------- 11:40:48 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1460285440, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 713030 | lead-out | 1 | 0x00 | 0x41 11:40:48 PM #9 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 4x (5,540 KB/s) 11:40:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:40:48 PM #11 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 4:42,374 (282374ms) -> OK 11:40:48 PM #12 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode 11:40:48 PM #13 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Seamless Link -> ON 11:40:48 PM #14 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: Yes 11:40:48 PM #15 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 80 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:40:48 PM #16 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x00 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x0A 0xE1 0x50 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x30 0x00 11:40:48 PM #17 Text 0 File DVDR.cpp, Line 5367 Drive: BENQ DVD DD DW1620 Book Type request: DVD-ROM Drive doesn't support changing Book Type for DVD-R 11:40:48 PM #18 CDR -1207 File DVDR.cpp, Line 4608 Book Type automatically set to: DVD-ROM 11:40:48 PM #19 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 11:40:48 PM #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 11:40:48 PM #21 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 11:40:48 PM #22 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.72a, size=20368 bytes, created 4/22/2004 3:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1211 (xpsp2.030422-1633), size=87296 bytes, created 4/23/2003 11:29:54 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Do you have the newest firmware on your burner? I used to get illegal disc errors with various media until I updated my LITE-ON's firmware.
