I can't burn using Nero 6.6.016 Keep getting "illegal disc" and "could not perform end of disc at once" Seems like this a common problem. Any help would be great. Thanks. Here is my logfile: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PHILIPS DVD+RW SDVD6004 >Version: 1.06 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23FB-60 atapi Port 0 ID 0 DMA: Off CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === PHILIPS DVD+RW SDVD6004 F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 157MB (161532kB) Memory in use : 69 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.2.2006 UDF compilation 10:36:12 AM #1 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : pure UDF Revision : 1.02 UDF Partition Type : physical 10:36:12 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:36:12 AM #3 Text 0 File Writer.cpp, Line 122 Writer PHILIPS DVD+RW SDVD6004 running 10:36:12 AM #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:36:12 AM #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2275935 (505:45.60, 4445MB) 10:36:12 AM #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:36:12 AM #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R 10:36:12 AM #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:36:12 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2275936 (2275936) = #2275936/505:45.61 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2275936 blocks [PHILIPS DVD+RW SDVD6004] -------------------------------------------------------------- 10:36:12 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4661116928, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2275936 | lead-out | 1 | 0x41 | 0x00 10:36:12 AM #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:36:12 AM #12 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:36:12 AM #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:36:12 AM #14 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 10:36:12 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:36:12 AM #16 SCSI -1066 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BD90600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 10:36:12 AM #17 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 10:37:03 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B6E0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x30 0x05 10:37:03 AM #19 CDR -1046 File Writer.cpp, Line 311 Illegal disc 10:37:03 AM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:37:04 AM #21 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:37:04 AM #22 SCSI -1066 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 10:37:04 AM #23 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 10:37:04 AM #24 CDR -1066 File WriterStatus.cpp, Line 167 Invalid field in command 10:37:04 AM #25 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 10:37:04 AM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/26/2005 9:12:48 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@praharyan, rempve that serial# first. A quick look at the log shows: 1: ************************************************ Nero Version: 6.6.0.16 ************************************************ Your version is out of date, use the nero general cleantool and uninstall ver 6.6.0.16 and install the more stable/reliable ver 6.6.0.18, do not install INCD. nero clean tool link: http://ww2.nero.com/nero6/enu/General_CleanTool.html 6.6.0.18 updates links: http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe Note: ******************************************************************* Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 1 TA 0 - 6.6.0.16 ******************************************************************* Your burner's firmware is upto date @1.06, no problem there. 2: ******************************************************************** DiskPeripheral : HITACHI_DK23FB-60 atapi Port 0 ID 0 DMA: Off ******************************************************************** Your HDD seems to be set for the slower PIO mode, enable DMA for this device. Here's how: http://www.onthegosoft.com/dma_setting_nt.htm 3: ******************************************************************** Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2275935 (505:45.60, 4445MB) ******************************************************************** Shrink should be producing smaller files to keep from burning too close to the outer edge of the disk where write error can occur, change the output files size to 4300. In shrink goto: edit---preferences, change to custom and enter a value of 4300. 4: ******************************************************************** MCN: "" TOCType: 0x00; Session Closed, disc fixated AND Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) ********************************************************************* This could mean that the recorder might not like the media you're using, try another brand like verbatims. 5: Try burning no slower that 4x and no greater than 8X. 6: Status: 0x04 (0x01, SCSI_ERR) This could indicate that there is a possible aspi problem like a corrupt layer, When you reinstall the new version of nero this should go away since nero comes with it's own aspi layer. Also there's no harm in installing additional ASPI drivers since it appears that drive also requires them for burning as shown here: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:59:42 AM (Adapter driver for rec) Try using force aspi, you can get the drivers here with instructions. http://radified.com/ASPI/forceaspi.htm
Try freeing up more resources for Nero to complete its task. Disable processes that are not needed to run while you use Nero. Make sure you do not disable system processes as that could cause your computer to crash...
Thanks a lot. I've installed the newer version of nero, changed the setting in shrink, but my drive doesn't seem to want to change to DMA mode. My F: drive is for my cd/dvd rom, which from that page you directed me to shows my secondary drive is the corresponding drive. That is in DMA mode. Should my primary drive be in DMA mode as well? I really appreciate this help!
I installed the new aspi files you directed me to and I was able to burn one disc, but now getting the same problems. Thanks again! Here's my logfile: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PHILIPS DVD+RW SDVD6004 >Version: 1.06 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23FB-60 atapi Port 0 ID 0 DMA: Off CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === PHILIPS DVD+RW SDVD6004 F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 214MB (219220kB) Memory in use : 58 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.2.2006 UDF/ISO compilation 12:02:27 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 12:02:27 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 12:02:27 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 12:02:27 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 12:02:27 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 12:02:27 PM #6 Text 0 File Writer.cpp, Line 122 Writer PHILIPS DVD+RW SDVD6004 running 12:02:27 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:02:27 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:02:27 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:02:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286127 (508:01.52, 4465MB) 12:02:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 12:02:28 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R 12:02:28 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:02:28 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PHILIPS DVD+RW SDVD6004] -------------------------------------------------------------- 12:02:28 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 12:02:28 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:02:28 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 12:02:28 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:02:28 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 12:02:28 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:02:28 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x072D1200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 12:02:28 PM #22 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 12:03:25 PM #23 SCSI -400 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06B50000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x91 Sense Qual: 0xC2 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x91 0xC2 12:03:25 PM #24 CDR -400 File Writer.cpp, Line 311 Unspecified target error 12:03:25 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:03:25 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:03:25 PM #27 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 12:03:25 PM #28 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 12:03:25 PM #29 CDR -1066 File WriterStatus.cpp, Line 167 Invalid field in command 12:03:25 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 12:03:25 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/26/2005 9:12:48 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
praharyan, ******************************************************************** DiskPeripheral : HITACHI_DK23FB-60 atapi Port 0 ID 0 DMA: Off ******************************************************************** Enable DMA for this device, if you don't it will slow down the entire process. Here's how: http://www.burstcopy.com/dma/xp/ here: ****************************************************************** Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286127 (508:01.52, 4465MB) ******************************************************************* You state you changed the setting in shrink for output files sizes of 4300MB, but it doesn't appear to be the case here according to the Last address to be written info (4465MB). here: ******************************************************************** TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) ******************************************************************** This might suggest that there's a problem with the burner, if there is, then a replacement is the solution. Have you tried using a different brand of media? Before giving up on that drive, I would suggest you try burning to SONY DVD+R media since I know its of good quality and made in japan, or even try Verbatim disks.
Yeah, the disc I tried to burn was copied on shrink using the previous setting. I'll try and burn it again on the new setting at 4300 MB. As for my primary channel. I tried changing it to DMA mode with no luck. My secondary channel is DMA Ultra Mode 2. Is there another way to change the primary channel to DMA mode?
Try right clicking on the primary IDE channel and choose uninstall. Reboot the PC for the change to take effect, go back and recheck, set to DMA if it hasn't been already, reboot and check again.
Sorry John, i know he's your costumer but to set the DMA on he should follow this brilliant guide made by our fellow AD member Alkohol: http://forums.afterdawn.com/thread_view.cfm/260038 My 2 pennys worth... [edit] Oh, and praharyan... Edit out the serial from the [bold]first[/bold] log... Thanks gents...
I reinstalled my driver and set to DMA Ultra Mode 5. It seems to function fine and its burning at twice the speed. Thank you guys so much for your help!!! And I'm seriously impressed with how fast you give answers to questions!
Apparently, I spoke too soon. I went to burn again and noticed it was burning slower than last time. Seems my computer reverted back to PIO mode. How can I keep it permanently in DMA mode?
It's not clear, but make sure your hard drive and burner are not sharing (connected to) the same IDE channel. Try connecting the drives to different IDE channels, then reboot and they should be dectected and hopefully set correctly. Please read this short article by microsoft: http://www.microsoft.com/whdc/device/storage/ide-dma.mspx Basically, Windows XP will turn off DMA mode for a device after encountering certain errors during data transfer operations. If more that six DMA transfer timeouts occur, Windows will turn off DMA and use only PIO mode on that device. Such errors could indicate imminent hardware failure. I was encountering this problem with one of my drives, soon after it ended up failing. As indicated above from the nero log: here: ******************************************************************** TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) ******************************************************************** This might suggest that there's a problem with the burner, if there is, then a replacement is the solution.
So, burning failure again. I'm about to just accept that the dvd drive is a failure. I bought it only two months ago though. here is the last log file. And how can i see if their is a conflict in the IDE channels? Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PHILIPS DVD+RW SDVD6004 >Version: 1.06 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23FB-60 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === PHILIPS DVD+RW SDVD6004 F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 198MB (203044kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.2.2006 UDF/ISO compilation 5:48:26 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 5:48:26 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 5:48:26 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 5:48:26 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 5:48:26 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 5:48:26 PM #6 Text 0 File Writer.cpp, Line 122 Writer PHILIPS DVD+RW SDVD6004 running 5:48:26 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 5:48:26 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 5:48:26 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 5:48:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2202143 (489:21.68, 4301MB) 5:48:26 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 5:48:26 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R 5:48:26 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:48:26 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [PHILIPS DVD+RW SDVD6004] -------------------------------------------------------------- 5:48:26 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2202144 | lead-out | 1 | 0x41 | 0x00 5:48:27 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 5:48:27 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 5:48:27 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 5:48:27 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 5:48:27 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:48:27 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B8E0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 5:48:27 PM #22 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 5:49:10 PM #23 SCSI -1106 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B230000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x73 0x03 5:49:10 PM #24 CDR -1106 File Writer.cpp, Line 311 Power calibration error 5:49:10 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:49:11 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 5:49:11 PM #27 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 5:49:11 PM #28 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 5:49:11 PM #29 CDR -1066 File WriterStatus.cpp, Line 167 Invalid field in command 5:49:11 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 5:49:11 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/26/2005 9:12:48 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
praharyan Your IDE info looks ok now. Before you give up on that drive, I would seriously consider trying a different brand of media. Here: according to you most recent log, the only problem I see is; ********************************************************************* TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) ********************************************************************* What ever brand of media you're using, the burner just doesn't like it, it seems to be very inconsistant in burning correctly to it. Try using Sony DVD+R disks from Staples or where ever you can find them, they're manufactured in japan, I use them with all the time and haven't had any problems. Lets try and rule out the media before suspecting the drive.
ok, I tried burning with Verbatim Advanced AZO+ dvd and it still failed. When I first bought the drive, I burned with SONY dvds and didn't have a problem, but I've found it hard to find them here in Prague. Also, why can I only seem to burn at 2.4x, which is quite slow? Here's the log file trying with the Verbatim: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PHILIPS DVD+RW SDVD6004 >Version: 1.06 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23FB-60 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === PHILIPS DVD+RW SDVD6004 F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 207MB (212640kB) Memory in use : 59 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.2.2006 UDF/ISO compilation 2:37:38 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 2:37:38 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 2:37:38 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 2:37:38 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 2:37:39 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 2:37:39 PM #6 Text 0 File Writer.cpp, Line 122 Writer PHILIPS DVD+RW SDVD6004 running 2:37:39 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:37:39 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:37:39 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 2:37:39 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2202143 (489:21.68, 4301MB) 2:37:39 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 2:37:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R 2:37:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:37:39 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [PHILIPS DVD+RW SDVD6004] -------------------------------------------------------------- 2:37:39 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2202144 | lead-out | 1 | 0x41 | 0x00 2:37:39 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 2:37:39 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 2:37:39 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 2:37:39 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 2:37:39 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:37:39 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B8E0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 2:37:39 PM #22 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 2:38:02 PM #23 SCSI -1046 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B230000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x30 0x05 2:38:02 PM #24 CDR -1046 File Writer.cpp, Line 311 Illegal disc 2:38:02 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:38:02 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 2:38:02 PM #27 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 2:38:02 PM #28 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 2:38:02 PM #29 CDR -1066 File WriterStatus.cpp, Line 167 Invalid field in command 2:38:02 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 2:38:02 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/26/2005 9:12:48 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:59:42 AM (Adapter driver for rec)
The disks you're using "Verbatim Advanced AZO+ dvd" are disks that I've also used and in my opinion are pretty darn good, so no problem there. The 2.4x speed that your seeing is what the burner defaults to if it's having a problem writing to the disk. At this point I would start to suspect a possible problem with the burner, getting a new one looks to be the solution here. Do some research and get your self a good reliable one (they're not that expensive nowadays).
