Can't copy saw 3 - **just needs DVDFab Decrypter**

WIll I have to uninstall the any dvd that I paid for to download the newer beta one?

 

I got those same errors twice at the 99% mark on RIPIT4ME. I click ok both times at that point it opened DVDshrink and shrunk it. I made a copy with DVDdecrypter with everything and a made a copy from the VOB files with cloneDVD2. That way I could cut out all the stupid previews. I played and watched the copy that I burned with CloneDVVD2 and it played flawlessly. It was a little more tedious than using ANYDVD and CloneDVD2 but at least it works. Slysoft had better get on the ball with all the latest and greatest protection coming out.

 

Finally... 100% complete full disc. and since so many people seem to continue having problems here is all you have to do.

Step1: Open up RI4M ver:1.6.4.0. Make sure you have FixVTS ver:1.6.0.2. If you dont RI4M will promt you to get it and give u a link to download it. Do this and install it. Before starting Step2 if you have AnyDVD make sure it is not running.

Step2: Using the 1-Click Mode follow the easy step-by-step instructions offered through the program, making sure to sure the files to your hard drive C and remembering where the folder is. RI4M will do its thing and eventually FixVTS will open up and run its course. At 99% an error reading

On-the-fly IFO/BUP file patching failed!
File Name: VTS_16_0.IFO
Size: 81,920 bytes
Reason: PatchIFO failed.
THEN-----------------------
On-the-fly IFO/BUP file patching failed!
File Name: VTS_64_0.IFO
Size: 81,920 bytes
Reason: PatchIFO failed.

click ok and continue to let FixVTS do its thing. It should only take a couple of seconds

Step3: The whole process up to this point should have taken approximatley 1 hour. Now that RI4M is done go into your Hard Drive C and find the folder you had RI4M save the dvd files into and put it onto your desktop. IMPORTANT! Do not create a shortcut to the folder. you must directly cut the folder from its location and put it onto your desktop. To prevent a simple error on this step. close RI4M before you try to put the folder on your desktop.

Step4: Open up CloneDVD2 and you will have 3 options 1) Copy DVD Titles 2) Clone DVD 3) Write Existing Data. "SAW 3" dvd information has already been ripped to your computer from using RI4M so go ahead an put in a blank disk. Now choose option 2 Clone DVD. click NEXT->

Step5: Here you will have the option to get rid of subtitles and choose your audiostreams. You can keep both sets of subtitles if you choose but the only audiostream you need to keep checked is English dolby AC-3/6 for your highest quality. Once again Click NEXT->

Step6: You are now asked to choose your "Output Method" and are given 3 options 1)DVD FILES 2)ISO/UDF IMAGE 3)DVD WRITER. Choose option 3)DVD WRITER and set your burn speed. Click NEXT->

Step7: Almost done. CloneDVD2 is now preparing to write. It will start by "Creating DVD files..." this should take about 20mins. It will then start "Writing..." All that is left for you to do is sit back and wait for CloneDVD2 to finish writing your new copy of "SAW 3" the writing process should take about 30mins. In total this whole process takes about 2hours give or take depending on your system.

RipIt4Me is a freeware product is available at http://www.ripit4me.org/download.html and a guide is available at http://www.ripit4me.org/guide.html

CloneDVD2 How ever is not a freeware product but you can download a 21 day free trial. It is availale at http://www.slysoft.com/en/download.html and a tutorial is available at http://fileforums.com/showthread.php?t=59975

I hope this helps ALOT of poeple Especially the newbies like me.
Also a huge thankyou to Binkie7 and rannh651

 

Step2: Using the 1-Click Mode follow the easy step-by-step instructions offered through the program, making sure to sure the files to your hard drive C and remembering where the folder is. RI4M will do its thing and eventually FixVTS will open up and run its course. At 99% an error reading

EDIT
Sure should say SAVE

 

I use RipIt4Me 1.6.4.0, DVD Decrypter 3.5.4.0,FixVTS 1.6.0.3, and DVD Shrink 3.2....

ok here is my problem... I run RipIt4Me in Full Disc mode, and it creates the .psl file correctly for DVD Decrypter... DVD Decrypter runs and says it is finished... then RipIt4Me tries to run FixVTS on the new VTS files... only now they are gone... while DVD Decrypter was running I had the output folder open and I could see the files being created on the hard drive. As soon as RipIt4Me tried to run FixVTS, the files just went "poof" and disapeared.... what can I do.. the copy of Saw i have is the Region 1 Unrated Edition...

 

im not to sure how to fix that problem. if u open RI4M and in the top left hand corner click on Logs/Settings scroll down and click on "View saved logs" thats about all i can think of.

 

This is what it said on me and my copy was fine follow this and your good to go and did not even try my old ways because of all the troubles I had read.

 

Iracekx did my explination help u burn it?

 

@Binkie7 how do u get a picture inyour signature?

 

Thank you

 

Full disc backup is as easy as this.......

RipIt4Me version 1.6.4.0
FixVTS version 1.6.0.3
DVD Shrink version 3.2.0.05
one complete and very good looking backup...

 

25 January: Version 1.6.5 is released.
From the changelog:
RipIt4Me 1.6.4.0 was able to rip Saw III without any change to the code (although 1.6.5.0 will do it a bit nicer, avoiding the DVD Decrypter messages)!
That was a significant achievement! We thank all the beta testers and the users who've helped bring this app where it is. The only reward we want is your satisfaction with the program.

 

wow there are like 20 saw 3 threads lol...i got a full disc backup just using ripit4me.

 

yeah they need to close most of them

 

Putting up a sticky "How To" and then banning the words Saw 3 sound good. LOL Every time something a little different comes along there's a big stir. When ARccOS first showed it was as bad if not worse. Now they've changed the "flavor" a little and there's this "big deal". This one was solved before the official release. There's a freeware alternative to the retail software. So anyone can do the backup for free. With all the different software, there's differnt alternatives for doing the backup. So, what's really new? We saw the same thing in Talladega Nights, Saw 3 is just a heaping helping of it.

 

The funny thing is lots of people keep swearing that they got it to work a certain way, yet it was one of the first things I tried and it didn't work.

Then the other funny thing is lots of people will list like 1 thing they tried that was up here, and say they can't get it to work for anything.

Then I go so far as to post exactly how I did mine in simple idiot steps and some people are still asking how to do it. So they must not have read it, because it was real simple.

You have to admit this was one was a major pain in the ass though. I spent a good 3 hours screwing around with this. I'm no noob either, I've been ripping DVD's for 3 years now. I thought Crank was hard. This one made Crank look like ripping a porno.

 

then we have Open Season coming next week yay!!