Can't find channels on Kryptview..Please help!

Hi,

Have followed instruction to swap & solder cable 1 and 3, worked perfectly was able to download lastest bin file, then went through installation menu, was able to find 7 TP's, just can't find channels??? In the instructions they are talking about channel data for download, where do you get that?? Can anyone help on where to go from there..
Please help, frustrated again!

Thanks in advance..

 

do a manual scan first on a lower frequency like 29900,if u pick up channels there then do a automatic search

 

Hi,

Thanks for reply, tried manual search on 29900, manual search Failed..Any ideas?

Thanks..

 

if u have another box see what frequency any channel iscomin in on ,then use that frequency,when u go into manual search and type in the frequency u should get a good signal quality if u dont its the wrong frequency

 

Hi,

Have tried lowering frequency, doesn't work, Can anyone explain what the 7 TP's are that it found, what are TP's? Shouldn't it find channels anyway doing an automatic scan??

Thanks..

 

tps are transponders where the signal is got from,i had same problem last week settin up mine just gettin the 7 tps but no channels, so i took the frequency off a channel i was gettin om my starview and entered that aand it picked up another tp where all the channels were, as i said try get the frequency your other channels are comin in on

 

Hi,

Thanks for you help here,
Using frequency 29900 getting afew channels not all of them now,
no movie channels, some sports..Can you say what frequency you are working from?
Does anyone have any bin file to sort channel also?

Thanks..

 

ok now that your gettin a few channels,go now and do an automatic scan it shud now pick up all channels,may take a few mins im workin off 29900

 

Hi,

Have selected NTL, in the forum somewhere it sais to use Dublin Legacy, is that NTL? Also have done automatic and found no more channels? frustrated..Thanks

 

ya use wat legacy is closest to you

 

Thanks a mil...using NTL, not working will keep trying..

Cheers!

 

are u on ntl in dublin and what channels r u getting

 

Yeah on NTL Dublin, not getting any terrestrial channels,
starts from 2000 CNBC going to 2031 which is info TV,
getting eurosport, discovery, tcm, setanta ireland, disney cinema, dave, city channel, BBC world, thats it...

Thanks..

 

when u went into automatic scan did u choose ntl then select dublin legacy and then scan

 

If you are on NTL Dublin select legacy top item on the list

Then select your area which is nearest to you will get the list in the guides section as well

You just need to be patient then and wait till the scan has completed then press the exit button and it will save the channels then put it on to sky sports and wait for the codes to update

 

Thats the problem...using NTL, don't have the dublin legacy option after that, is there another option or secret pin code that you have to use get???? whats my problem??

Thanks..

 

don't have Dublin Legacy option, any ideas?

Thanks..

 

please tell me what exactly you are doing when doing a scan step by step and any changes you make thanks ??

 

Hi,

Press menu, select installation, enter 0000 for pwd, then select automatic seach. Have two options, network (NTL selected, do not have Dublin legacy option). Channel Seach Type option, have "all" selected. Click on start seach (green button). Does not come up with one channel found. When I go to manual search, and select frequency 299, find a few channels, but none of the terrestrial ones. Any advice.

 

ok this is where you are going wrong follow below

1 do a factory default now and nothing eles till that has finished

2 new screen go to bottom option select auto scan

3 do not change any settings in here just press the GREEN BUTTON ONLY

4 next screen you will see legacy channels in here after it has finished above patients on this

5 press ok when you see the legacy channels nothing else and just leave it ok that should sort you out