i hope someone can help me i got a digivox t all firmware is ok had it tested at mates so thats ok now put mmds aerial up my self useing the choxxs cable that was there i live in nenagh so pointed aerial at keeper hill ( 6 or 8 miles away like all the rest)i had power supply tested in shop thats ok now when i do a scan with aerial on and emu on i keep getting no signal do i need a new downcoverter any help plz am new to all this and i have the right codes i have been trying to get this working for the last three weeks thanks to all who reply
Just check to see is your antennea exactly the same as your mates incase it downconverts at higher or lower frequencies.
ok will look in to that but i think it is the same if not how do you get it higher or lower this ia all new to me and thanks for the reply
Check the frequency on the box that is working,eg,there is a different one for each bunch of channels and then you can rule that out,if different enter them manualy and repeat for all if this works.New coax would be advisible
i have do frequency and all that am thinking a new mesh aerial but it costs 109 euro and with n3 comeing how long will i get out of the new aerial am sick of going up and down the roof well i will keep trying cheers
check that the freq of your down convertor is 222/408 thats the one you need for keeper hill if its a 214 down convertor you have it wont work off that transmitter.
hi geek22 well got it working i went and got a new power supply all working thanks for your reply one thing only got sly preimer for films is there more i keep doing an auto san but get 91 programs is that right
