I have a friend who's trying to set a kryptview outside Galway city.He's getting his signal from a sub transmitter.I've checked box he's my own system and it's working fine.I know that I read on an old forum that someone else had issues setting a box in this area (abbey!!)Can anyone help me out with this. Johno
im living fairly close to where your friend is im using kryptview if you have flashed the box with the correct firmware then try entering the following freq manually 250 266 282 298 314 330 346 362 378 follow this link everything you need http://forums.afterdawn.com/thread_view.cfm/779888
turner14 (Newbie) 5. August 2009 @ 21:24 im living fairly close to where your friend is im using kryptview if you have flashed the box with the correct firmware then try entering the following freq manually 250 266 282 298 314 330 346 362 378 follow this link everything you need http://forums.afterdawn.com/thread_view.cfm/779888 Turner14 Is your aerial facing Galway or abbeyknockmoy ??? My friend got a coupling to go between N*L connection and F type connection,When he does a scan he gets a message No Signal / Poor Signal.Have you ever seen this ???
The signal in that area is pretty good.Must be a connection issue. First off, might seem pretty basic, but is he connected to the RF in port on the kryptview. Also the cable should be coming from the power supply unit , not directly from the MMDS aerial on the roof. Check all the connections , make sure they are secure.
my aerial is facing galway never got a msg like that before follow gaffs advice if you have a power meter check if there is voltage in the power supply maybe aerial needs to be realigned
cactikid do you have a kryptview 750? If you do I suggest you look at the back. The only input socket is named ' RF in ' the socket directly below it is called ' Loop out' The only other sockets on the kryptview 750 are video and audio out. There is no socket called ' cable input' it's called 'RF in '
