i am trying to install firmware onto replay lite i have what i think is called a red light problem, the box will not turn on i have downloaded the software 742 and the stblink520 have the leads (i know there the right ones i have done loads of eurovoxs and a starveiw with no problem) any ideas anybody
You need to get the files from eamos library. all the instructions are there. You need the 742 and 744 file before you flash.
click on this thread http://forums.afterdawn.com/thread_view.cfm/79/502990 it has step by step instructions
i have done all of that when i connect the box and download firmware nothing is working just says connecting
what says just connecting? do you mean when u try to update the box? U mean on the pc, it says that? Have you got the right leads? Do you establish a connection with the com port, using stblink? do you transfer the firmware to the box and does the light flash green/red very fast, before you power down and remove lead? try a factory reset and start again - if all else fails difficult to help, when we dont know the exact steps you have done
Found this, try this>> NOT sure you need to put the 744 and 752 on - think maybe after the 742a - just then go for the new firmware just released good luck!
Also having issues with 281208 replay lite fix with green on light on but no output at all from box - have flashed with 742a then 910 then 281208 but still no joy - box was working on unscrambled before I tried using the fix - any ideas? Cheers
if it was working before and you did the other fixes previously, then u only needed to put the latest on do a factory reset and start again, might work - not sure