Cant write SVCD with Nero 5590 and Sony CDU-928

Hi,

when i am trying to write a SVCD with this combination NERO reports a write error. Burning ISO Filesystem works without any problems.
I started a new svcd project and added the avseq1.dat file without any problems. During writing (simulating at the moment ) nero aborts after about 10 seconds with a write error.

Can anybody please help??

Log-File:

Video-CD
13.8.2002

14:30:56 #1 Text 0 File VCDCompilationImpl.cpp, Line 795
Super Video CD compatibility options:
Videos directory: MPEG2
ENTRIES.SVD File Identification: ENTRYVCD

14:30:56 #2 Text 0 File Isodoc.cpp, Line 6002
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : TAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:30:56 #3 Text 0 File Reader.cpp, Line 118
Reader running

14:30:56 #4 Text 0 File Writer.cpp, Line 129
Writer SONY CD-R CDU928E running

14:30:56 #5 Text 0 File Burncd.cpp, Line 3474
Turn on Track-At-Once, using CD-R/RW media

14:30:56 #6 ISO9660GEN -11 File geniso.cpp, Line 4427
First writeable address = 0 (0x00000000)

14:30:56 #7 ISO9660GEN -11 File geniso.cpp, Line 4427
First writeable address = 0 (0x00000000)

14:30:56 #8 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (original item values)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
1: TRM_DATA_MODE2_2336 (AVSEQ01)
2 indices, index0 (150) not provided
original CD pos #0 + 354397 (354397) = #354397/78:45.22
relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

14:30:58 #9 Text 0 File DlgWaitCD.cpp, Line 198
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 355146 (78:57.21)

14:30:59 #10 Text 0 File DlgWaitCD.cpp, Line 1393
Recorder: SONY CD-R CDU928E;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data: ?

14:31:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 835
Prepare recorder SONY CD-R CDU928E for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x20 Close CD
Tracks 1 to 2:
TRM_DATA_MODE2_2332, 2332/0x0, ISRC "", FilePos 0 349800 1749000
TRM_DATA_MODE2_2332, 2332/0x0, ISRC "", FilePos 1749000 2098800 828552604

14:31:00 #12 Text 0 File ThreadedTransferInterface.cpp, Line 863
Removed 2 run-out blocks from end of track 1.

14:31:00 #13 Text 0 File ThreadedTransferInterface.cpp, Line 863
Removed 2 run-out blocks from end of track 2.

14:31:00 #14 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE2_2332, 2332, config 0, wanted index0 0 blocks, length 598 blocks [SONY CD-R CDU928E ]
1: TRM_DATA_MODE2_2336 (AVSEQ01)
2 indices, index0 (150) not provided
original CD pos #0 + 354397 (354397) = #354397/78:45.22
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2332, 2332, config 0, wanted index0 0 blocks, length 354395 blocks [SONY CD-R CDU928E ]
--------------------------------------------------------------

14:31:00 #15 Phase 24 File dlgbrnst.cpp, Line 1560
Caching of files started

14:31:01 #16 Phase 25 File dlgbrnst.cpp, Line 1560
Caching of files completed

14:31:01 #17 Phase 32 File dlgbrnst.cpp, Line 1560
Simulation started at 2x (300 KB/s)

14:31:01 #18 Text 0 File ThreadedTransferInterface.cpp, Line 1967
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

14:31:12 #19 SCSI -1135 File Cdrdrv.cpp, Line 1406
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02430000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0xAA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1C 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

14:31:12 #20 MMC -1135 File Writer.cpp, Line 330
Write error

14:31:12 #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

14:31:12 #22 CDR -201 File WriterStatus.cpp, Line 146
Invalid writestate

14:31:12 #23 TRANSFER -18 File WriterStatus.cpp, Line 146
Could not perform EndTrack

14:31:12 #24 Phase 34 File dlgbrnst.cpp, Line 1560
Simulation failed at 2x (300 KB/s)

14:31:12 #25 Text 0 File Scsicmd.cpp, Line 383
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
-----------------------------------

 

no idea?

VCD doesnt work either, same error !?

Audio & iso still working