channels poor

hi guys ive got got a 2006 eurobox with filmware 21 04 08 if i put the cable into qam rf in the picture is very poor but if i put the cable into loop out picture a lot better any idea

 

Are you using it through a splitter or from the main feed ?

You will need to know if you have a clone or genuine b0x as there are 2 different firmwares

 

no splitter genuine 2006 red box used ufl max red2

 

try reflashing ur box with same firmware.

 

tryed that a few times still the same

 

2006 eurovox is usually a blue box,2007 is red have you tred the blue firmware?

 

tryed the blue update says not suitable for my reciever

 

then you have a red

 

any other ideas would be greatfull

 

you could try a signal booster

 

tryed that today still the same

 

From your first post you never really had a problem other than reversed RF sockets. So if you go into loopout RF all is still fine?

 

yes a lot better but i cannot have my loop cable for my hdd connected

 

Check for any dry solder joints.