I have the newest version of both.... When I use Existing Data and write once. If I try to use another file and write the system will lock up to the point I have to turn the power off. Copy DVD Titles At the end after it is done, if I replace the destination disc and click the button ( write )to make another backup it hangs and does nothing. The Sheep is writing but nothing else is happening, it lock up the system. Thanks..
Hi oupiin, I'm missing something . . . . The BOTH of what ? I assume you have the newest CloneDVD2 but what's the "second one" ? What "file" are you trying to add ? This question I understand BUT we need a lot more information in order to answer it. Perhaps you can rewrite your question and add some information - LQQk, This is an example of the type of information we need, fill in as much as you can ~ it's all important ~ What are your PC's specs ? 1. Your processor, ____________ 2. Your RAM, ____________ 3. Your "FREE" (available) RAM, ____________ 4. How much FREE Hard drive space do you have to work with ___________? 5. Your burner's model, ___________ Have you tried checking your burning basics ? 1. Are you operating in the PIO or DMA transfer mode ? 2. Have you flashed your Firmware ? Is it current ? What is it's number ? ______ 3. Do you have a working ASPI layer ? 1. What is your burn speed set as ? ____X 2. Is your DVD Target Size set to: a. DVD-5 (default) ? b. DVD-9 Dual Layered DVD ? c. "Custom"? If "Custom", what, size have you selected ? ______MB What Brand / type of media are you using ? (Of major importance if you're having any trouble writing to, reading from OR burning to your disc.) When was your last Disk Defrag ? If you have to think about it, it's been far too long. You need to do it now ! ! ! PLEASE REMEMBER, WE AREN'T THERE WITH YOU, YOU MUST SUPPLY US WITH ALL THE INFORMATION ABOUT YOUR PC AND A STEP BY STEP DESCRIPTION OF WHAT YOU'RE DOING AND WHERE AND WHAT ERRORS YOU ARE GETTING. INFORMATION = SOLUTIONS
