command sequence error

Discussion in 'Nero discussion' started by mr_dvd, Jul 7, 2005.

  1. mr_dvd

    mr_dvd Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I'm getting an error using nero while burning DVD's my burner worked fine for a week and then I started getting errors.
    here is the log of loghistory I'll appreciate any help.. thanx



    7:00:26 PM #42 Text 0 File DVDMinusRW.cpp, Line 541
    EndTrack 2: Last written address was 12431

    7:00:26 PM #43 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12448): write at #12448

    7:00:26 PM #44 Text 0 File DVDR.cpp, Line 2000
    Recording mode: Sequential Recording Mode for Multisession

    7:00:26 PM #45 Text 0 File Mmc.cpp, Line 20660
    Set BUFE: Super Link -> ON

    27:00:26 PM #46 Text 0 File DVDR.cpp, Line 2141
    Start write address at LBA 12448
    DVD high compatibility mode: No

    7:00:26 PM #47 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-RW (3), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:00:26 PM #48 SCSI -1023 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x2C
    Sense Qual: 0x00
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0xD0 0xA0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x2C 0x00

    7:00:26 PM #49 CDR -1023 File ThreadedTransferInterface.cpp, Line 1799
    Command sequence error

    7:00:26 PM #50 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 1799
    Could not perform StartTrack

    7:00:26 PM #51 SCSI -1066 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x64 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    7:00:26 PM #52 CDR -1066 File WriterStatus.cpp, Line 245
    Invalid field in command

    7:00:26 PM #53 TRANSFER -19 File WriterStatus.cpp, Line 245
    Could not perform Fixation

    7:00:26 PM #54 Text 0 File WriterStatus.cpp, Line 254
    falling back to disc fixation

    7:00:26 PM #55 SCSI -1066 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x00 0x00 0x00 0xE4 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    7:00:26 PM #56 CDR -1066 File WriterStatus.cpp, Line 245
    Invalid field in command

    7:00:26 PM #57 TRANSFER -19 File WriterStatus.cpp, Line 245
    Could not perform Fixation

    7:00:26 PM #58 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    7:00:26 PM #59 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    mr_dvd, Jul 7, 2005
    #1
  2. mr_dvd

    mr_dvd Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    can anyone please help me?
     
    mr_dvd, Jul 7, 2005
    #2
  3. arniebear

    arniebear Active member

    Joined:
    Jan 2, 2005
    Messages:
    7,191
    Likes Received:
    0
    Trophy Points:
    96
    You need to give a little more information, your nero log is not complete, it does not show your drive, settings, or what media you are using.

    Is this a new burner? What media are you using?
     
    arniebear, Jul 8, 2005
    #3
  4. mr_dvd

    mr_dvd Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    yeah this is a new burner,,,,it worked fine for a week...I assume by media you mean the kind of disks I'm using? (I'm using both -r and rw disks) here is the full log from nero..


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    singh

    1A20-020K-0330-1726-8318-4416

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d
    (Nero Express)
    Recorder: <DVDRW IDE 16X> Version: A082 - HA 0 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <DVDRW IDE 16X >Version: A082 - HA 0 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : DVDRW IDE 16X atapi Port 0 ID 1 DMA: On

    === CDRom-Device-Map ===
    DVDRW IDE 16X D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 255MB (261616kB)
    Free physical memory: 63MB (64636kB)
    Memory in use : 75
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.7.2005
    Burn DVD Image
    10:53:37 PM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    10:53:37 PM #2 Text 0 File Writer.cpp, Line 122
    Writer DVDRW IDE 16X running

    10:53:37 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as TAO.
    MTYP: Mediumtype = DVD-R/RW (0x6)
    Image file name: <C:\Documents and Settings\sohan\My Documents\My Pictures\image_original\Image_original.nrg>

    10:53:37 PM #4 Text 0 File Burncd.cpp, Line 3230
    Turn on Track-At-Once, using DVD-R/RW media

    11:22:43 PM #5 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2228607 (495:14.57, 4352MB)

    11:22:43 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    11:22:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: DVDRW IDE 16X, Media type: DVD-RW
    Disc Manufacturer: RITEKW - 01
    Disc Application Code: 64, Disc Physical Code: 214

    11:22:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Disc not empty. Insert empty disc.
    (Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)
    This disc is not empty.
    (Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)
    Disc was erased successfully.
    Accessing disc...
    (Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)

    11:22:43 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 12288 (12288) = #12288/2:43.63
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12272 blocks [DVDRW IDE 16X]
    1: TRM_DATA_MODE1 (2 - DVD-ROM)
    2 indices, index0 (0) not provided
    original disc pos #12288 + 160 (160) = #12448/2:45.73
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 144 blocks [DVDRW IDE 16X]
    2: TRM_DATA_MODE1 (3 - DVD-ROM)
    2 indices, index0 (0) not provided
    original disc pos #12448 + 2216112 (2216112) = #2228560/495:14.10
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2216096 blocks [DVDRW IDE 16X]
    3: TRM_DATA_MODE1 (4 - DVD-ROM)
    2 indices, index0 (0) not provided
    original disc pos #2228560 + 32 (32) = #2228592/495:14.42
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [DVDRW IDE 16X]
    4: TRM_DATA_MODE1 (5 - DVD-ROM)
    2 indices, index0 (0) not provided
    original disc pos #2228592 + 16 (16) = #2228608/495:14.58
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [DVDRW IDE 16X]
    --------------------------------------------------------------

    11:22:43 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [DVDRW IDE 16X] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 5:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 25165824, ISRC ""
    2: TRM_DATA_MODE1, 2048/0x00, FilePos 25165824 25165824 25493504, ISRC ""
    3: TRM_DATA_MODE1, 2048/0x00, FilePos 25493504 25493504 4564090880, ISRC ""
    4: TRM_DATA_MODE1, 2048/0x00, FilePos 4564090880 4564090880 4564156416, ISRC ""
    5: TRM_DATA_MODE1, 2048/0x00, FilePos 4564156416 4564156416 4564189184, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    12288 | 2 | 0 | 0x41 | 0x00
    12288 | 2 | 1 | 0x41 | 0x00
    12448 | 3 | 0 | 0x41 | 0x00
    12448 | 3 | 1 | 0x41 | 0x00
    2228560 | 4 | 0 | 0x41 | 0x00
    2228560 | 4 | 1 | 0x41 | 0x00
    2228592 | 5 | 0 | 0x41 | 0x00
    2228592 | 5 | 1 | 0x41 | 0x00
    2228608 | lead-out | 1 | 0x41 | 0x00

    11:22:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1111
    Removed 16 run-out blocks from end of track 1. Length: 12288 -> 12272.

    11:22:43 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1111
    Removed 16 run-out blocks from end of track 2. Length: 160 -> 144.

    11:22:43 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
    Removed 16 run-out blocks from end of track 3. Length: 2216112 -> 2216096.

    11:22:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1111
    Removed 16 run-out blocks from end of track 4. Length: 32 -> 16.

    11:22:43 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    11:22:44 PM #16 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    11:22:44 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    11:22:44 PM #18 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    11:22:44 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:22:44 PM #20 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode for Multisession

    11:22:44 PM #21 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Super Link -> ON

    11:22:44 PM #22 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: No

    11:22:44 PM #23 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-RW (3), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:22:45 PM #24 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:45.998 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:48 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:48.607 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:48 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:48.638 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:48 PM #27 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:48.670 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:48 PM #28 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:48.701 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:48 PM #29 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:48.732 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:48 PM #30 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:48.763 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:48 PM #31 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:48.795 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:48 PM #32 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:48.826 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:48 PM #33 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:48.857 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:48 PM #34 Text 0 File Cdrdrv.cpp, Line 1288
    23:22:48.888 - DVDRW IDE 16X\H0 T1 : Queue again later

    11:22:57 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:22:59 PM #36 Text 0 File DVDMinusRW.cpp, Line 516
    EndTrack 1: Last written address was 12271

    11:22:59 PM #37 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #12288): write at #12288

    11:22:59 PM #38 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode for Multisession

    11:22:59 PM #39 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Super Link -> ON

    11:22:59 PM #40 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 12288
    DVD high compatibility mode: No

    11:22:59 PM #41 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-RW (3), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:22:59 PM #42 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:23:02 PM #43 Text 0 File DVDMinusRW.cpp, Line 516
    EndTrack 2: Last written address was 12431

    11:23:02 PM #44 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12448): write at #12448

    11:23:02 PM #45 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode for Multisession

    11:23:02 PM #46 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Super Link -> ON

    11:23:02 PM #47 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 12448
    DVD high compatibility mode: No

    11:23:02 PM #48 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-RW (3), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:23:02 PM #49 SCSI -1023 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x2C
    Sense Qual: 0x00
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0xD0 0xA0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x2C 0x00

    11:23:02 PM #50 CDR -1023 File ThreadedTransferInterface.cpp, Line 2050
    Command sequence error

    11:23:02 PM #51 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 2050
    Could not perform StartTrack

    11:23:02 PM #52 SCSI -1066 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x74 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:23:02 PM #53 CDR -1066 File WriterStatus.cpp, Line 249
    Invalid field in command

    11:23:02 PM #54 TRANSFER -19 File WriterStatus.cpp, Line 249
    Could not perform Fixation

    11:23:02 PM #55 Text 0 File WriterStatus.cpp, Line 258
    falling back to disc fixation

    11:23:02 PM #56 SCSI -1066 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x00 0x00 0x00 0xF4 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:23:02 PM #57 CDR -1066 File WriterStatus.cpp, Line 249
    Invalid field in command

    11:23:02 PM #58 TRANSFER -19 File WriterStatus.cpp, Line 249
    Could not perform Fixation

    11:23:02 PM #59 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    mr_dvd, Jul 8, 2005
    #4
  5. mr_dvd

    mr_dvd Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    bump???
     
    mr_dvd, Jul 8, 2005
    #5
  6. BTFSB

    BTFSB Member

    Joined:
    Mar 26, 2005
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    16
    Try slowing down your burn speed to 4x and see what happens
     
    BTFSB, Jul 8, 2005
    #6
  7. mr_dvd

    mr_dvd Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    it does the same thing....
     
    mr_dvd, Jul 8, 2005
    #7
  8. mr_dvd

    mr_dvd Member

    Joined:
    Jul 7, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    when I slow down the burn speed it still errors out....
     
    mr_dvd, Jul 8, 2005
    #8
  9. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @mr_dvd - first of all - edit your posts and BLANK OUT your serial number before it gets stolen. i've got your logfile in notepad and will see what falls out the bottom. be right back....
     
    creaky, Jul 9, 2005
    #9
  10. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    - EDIT OUT your serial number

    - exactly which drive have you got, "DVDRW IDE 16X" is very generic and various manufacturers make this drive...

    - your running out of memory, and will be using virtual memory thus your hard disc will start 'swapping' and interfering with burning

    - this movie is fine, but in case you hadn't set it previously, go into DVD Shrink's preferences and set target size to 4300MB, thus avoiding the outer edge of future discs.

    - update the firmware and try again

    - uninstall Nero, uninstall it completely using Nero's 'Clean Tools', then reinstall WITHOUT Nero'd InCD - this packet writing software tends to interfere with standard Burning Rom
     
    Last edited: Sep 20, 2005
    creaky, Jul 9, 2005
    #10
  11. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    bump
     
    creaky, Sep 20, 2005
    #11

Share This Page