Comments about my Nero Log, please

Hi!

Could You have a look into my log and tell me possible causes of burning error??

Is it the amount memory, or something different??
Is it possible then for me to burn this DVD, even though having only 256 MB??

THANKS!!!

LOG:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999-09-10 12:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2

Recorder: <TOSHIBA CD/DVDW SDR6472U>Version: TU02 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA CD/DVDW SDR6472U>Version: TU02 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600UE-22HCT1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA CD/DVDW SDR6472U atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
TOSHIBA CD/DVDW SDR6472U E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 29360128 (29360128) Byte
BUFE : 0
Physical memory : 246MB (252336kB)
Free physical memory: 53MB (54568kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.5.2006
Kompilacja ISO
15:13:14 #1 Text 0 File Isodoc.cpp, Line 6423
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:13:14 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 28672KB of Memory

15:13:14 #3 Text 0 File Reader.cpp, Line 124
Reader running

15:13:14 #4 Text 0 File Writer.cpp, Line 113
Writer E: TOSHIBA CD/DVDW SDR6472U running

15:13:14 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

15:13:14 #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media

15:13:15 #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2149199 (477:35.74, 4197MB)

15:13:15 #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

15:13:15 #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TOSHIBA CD/DVDW SDR6472U, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

15:13:15 #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:13:15 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2149200 (2149200) = #2149200/477:36.0
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2149200 blocks [E: TOSHIBA CD/DVDW SDR6472U]
--------------------------------------------------------------

15:13:15 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TOSHIBA CD/DVDW SDR6472U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4401561600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2149200 | lead-out | 1 | 0x41 | 0x00

15:13:15 #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

15:13:15 #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

15:13:15 #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

15:13:15 #16 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.

15:13:15 #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

15:13:15 #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 6x (8 310 KB/s)

15:13:15 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:13:15 #20 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode

15:13:15 #21 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes

15:13:15 #22 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:19:47 #23 SPTI -1135 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 10 99 E0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x055f0000: Len x10000
0x49 2A 2C 2B EC 37 62 A5 0D F1 B4 2E 92 04 EB 1E
0x3E 48 E4 2D 4D 51 DA 5B 5B 1B 5B D6 D0 00 74 8E
0x09 3E EE 5B 88 7A 0E 08 A0 3D 71 B0 47 C4 A0 38

15:19:47 #24 CDR -1135 File Writer.cpp, Line 302
Write error
E: TOSHIBA CD/DVDW SDR6472U

15:19:48 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:19:48 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

15:19:48 #27 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 1087967

15:19:48 #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 6x (8 310 KB/s)

15:20:10 #29 SPTI -1046 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x52 01 00 00 00 01 00 00 24 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
Buffer x03546800: Len x24


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 2001-08-17 14:07:32
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1999-09-10 12:06:00

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

 

you will be able to burn with only 256mb ram but you will have to free up all your memory by closing all other programs apart from nero.
also you need to burn at lowest speed possible not 6x.
if you could upgrade your memory to 512mb at least you should have less problems.

 

Most people here agree that 512mb is the least ammount of RAM necessary to consistently burn DVD's. It can be done with only 256mb if you shut down everything else running on your computer, but it definately is not advised if you are serious about burning DVD's. Disconnect your internet connection, close any antivirus and antispyware programs running in the background and do not use your computer while it is burning.

Also, as lfc4ever stated, try burning slower. I would recommend 4x as this speed seems to be optimum for successful burning. Burning slower than 4x can cause problems just like burning too fast can.

These are not the greatest of DVD media. Others have had problems with this particular brand (TDK?). Here is a link:http://forums.afterdawn.com/thread_view.cfm/253003

Your burner doesn't have a write strategy for this brand of DVD's. Since you have the latest firmware for your burner, the only solution is to try another brand of media. I have had great luck with Verbatim DVD's, Taiyo Yuden,or Sony/Maxell/Fuji if made in Japan. You might want to give them a try.