connecting my plasma to set top box?

Discussion in 'Televisions' started by melix04, Aug 5, 2006.

  1. melix04

    melix04 Member

    Joined:
    May 30, 2004
    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    16
    I have just brought a SD Panasonic Plasma and I cant get any sound.
    I have a TEAC set top box and have the green, blue and red cords connected to my plasma and then to the set top box, but no sound can anyone help, the instructions are useless!!!! :)
     
    melix04, Aug 5, 2006
    #1
  2. diabolos

    diabolos Guest

    You must connect a pair of stereo audio cables (Red and White) from the set top box to the TV. The only cables you have connected right now are Component Video cables and each one carries a component of the video signal. No audio is carried.

    There should be a red and white RCA jacks either to the side or at the bottom on the component video input jacks. Use those jacks.

    Ced
     
    diabolos, Aug 5, 2006
    #2
  3. melix04

    melix04 Member

    Joined:
    May 30, 2004
    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    16
    thanks thats what i thought no audio cable is connected but i did try it but didnt work im pulling my hair out, but when im less stressed ill try again heheh :).

    Thanks for the quick reply
     
    melix04, Aug 5, 2006
    #3
  4. melix04

    melix04 Member

    Joined:
    May 30, 2004
    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    16
    that worked thanks for your help.
    But now the pictures on some channels are pixelated so i manually reset the channels and now im missing all of the channel 7 spots, it says no channel.
    Any ideas?
     
    melix04, Aug 5, 2006
    #4
  5. melix04

    melix04 Member

    Joined:
    May 30, 2004
    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    16
    worked it out finally all is ok!! :)
     
    melix04, Aug 5, 2006
    #5

Share This Page