connecting wireless router to thompson THG520

hi all can anyone help me out connecting a linksys wireless G router to a Thomson modem model THG520 please mods if this is in the wrong section please remove to right forum

 

I would guess it's a simple matter of shoving a cat5 cable from the WAN port on the router to the modem.. then logging into the router and looking for it's own dhcp wan setting.

No info about this horrid tommy that I can find.. apart from pdf downloads (in french!!)

 

thanks i tryed that and it didn't work it's a router from digiweb so not really sure

 

You have connectivity from the pc to the modem when it's plugged straight to the pc? Check if it's dhcp or static.. then I would investigate the router settings. They are nearly always set up default for dhcp to modem (all I have seen use a 10.xxx.xxx.xxx. ip for the wire between router and modem)

I only have mine as an example..

1 192.168.2.1 (192.168.2.1) 1.175 ms 1.185 ms 1.191 ms
2 10.120.64.1 (10.120.64.1) 12.976 ms 13.356 ms 15.169 ms

first is router.. second is wire to modem..

took a different tack and went hunting for the router instead XD

http://www.microsoft.com/athome/moredone/wirelesssetup.mspx

damn thing should just work.........

 

ok thanks varnull will take a look