I am trying to copy a dvd that I have already burnt and I continue to get this error message. Come to find out this is the only movie that is giving me this message. The log is below and I have tried to copy it both ways, burning on to the hard drive first and then a quick copy(not burning to hard drive). Can someone please help? Thanks Burning Quick Copy (not to hard drive) Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU56 - HA 1 TA 3 - 7.8.5.0 Adapter driver: <USB 1.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <SAMSUNG DVD-ROM SD-616E >Version: F501 - HA 1 TA 1 - 7.8.5.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SV4002H atapi Port 0 ID 0 DMA: On DiskPeripheral : ST340015A atapi Port 0 ID 1 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-224B atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-R/RW SW-224B E: CDRom0 SAMSUNG DVD-ROM SD-616E F: CDRom1 TOSHIBA CD/DVDW SD-R5372 G: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 38797312 (0) Byte BUFE : 0 Physical memory : 239MB (245232kB) Free physical memory: 51MB (52736kB) Memory in use : 78 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.10.2007 DVD-Copy on the fly 5:35:41 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:35:43 PM #2 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:35:44 PM #3 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:35:44 PM #4 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xAC 10 00 00 00 00 00 00 00 01 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x04f3f040: Len x18 5:35:44 PM #5 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xBB 00 FF FF 00 B0 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 5:35:44 PM #6 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x14 Start 0 Len 2042720 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 5:35:44 PM #7 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 2042720 = 2042720, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 5:35:44 PM #8 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 5:35:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2042719 (453:56.19, 3989MB) 5:35:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 5:35:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: TOSHIBA CD/DVDW SD-R5372, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 5:35:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:35:45 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2042720 (2042720) = #2042720/453:56.20 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2042720 blocks [G: TOSHIBA CD/DVDW SD-R5372] -------------------------------------------------------------- 5:35:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [G: TOSHIBA CD/DVDW SD-R5372] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4183490560, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2042720 | 2042720 | 0x00 2042720 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:35:45 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:35:45 PM #16 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-No, small files-No (<64KB) 5:35:45 PM #17 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 16x (22,160 KB/s) 5:35:45 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:35:46 PM #19 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 5:35:46 PM #20 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 5:35:46 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 38769600 5:35:57 PM #22 SPTI -1128 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1128) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 00 00 00 17 A0 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 Buffer x084e2f80: Len x10000 5:35:57 PM #23 TRANSFER -25 File Reader.cpp, Line 270 Error reading data 5:35:57 PM #24 Text 0 File Reader.cpp, Line 273 Exception value: -1128 5:35:57 PM #25 CDCOPY -12 File DVDReader.cpp, Line 148 Unrecoverable read error at LBA 6048 5:36:03 PM #26 Phase 40 File dlgbrnst.cpp, Line 1435 Aborted by user 5:36:04 PM #27 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03 5:36:04 PM #28 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 0 5:36:04 PM #29 CDR -1176 File WriterStatus.cpp, Line 162 Session fixation error G: TOSHIBA CD/DVDW SD-R5372 5:36:04 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 5:36:04 PM #31 Phase 39 File dlgbrnst.cpp, Line 1762 Burn process aborted 5:36:04 PM #32 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:36:04 PM #33 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:36:04 PM #34 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 5:36:04 PM #35 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:36:07 PM #36 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 5:36:07 PM #37 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ********************************************************************* Burning to hard drive Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU56 - HA 1 TA 3 - 7.8.5.0 Adapter driver: <USB 1.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <SAMSUNG DVD-ROM SD-616E >Version: F501 - HA 1 TA 1 - 7.8.5.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SV4002H atapi Port 0 ID 0 DMA: On DiskPeripheral : ST340015A atapi Port 0 ID 1 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-224B atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-R/RW SW-224B E: CDRom0 SAMSUNG DVD-ROM SD-616E F: CDRom1 TOSHIBA CD/DVDW SD-R5372 G: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 38797312 (0) Byte BUFE : 0 Physical memory : 239MB (245232kB) Free physical memory: 78MB (80692kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.10.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 5:53:53 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:53:53 PM #2 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:53:53 PM #3 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xAC 10 00 00 00 00 00 00 00 01 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x04f5ea40: Len x18 5:53:53 PM #4 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xBB 00 FF FF 00 B0 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 5:53:53 PM #5 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x14 Start 0 Len 2042720 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 5:53:53 PM #6 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 2042720 = 2042720, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 5:53:53 PM #7 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 5:53:54 PM #8 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2042719 (453:56.19, 3989MB) 5:53:54 PM #9 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 5:53:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:53:54 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2042720 (2042720) = #2042720/453:56.20 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2042720 blocks [Image Recorder] -------------------------------------------------------------- 5:53:54 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4183490560, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2042720 | 2042720 | 0x00 2042720 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:53:54 PM #13 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-No, small files-No (<64KB) 5:53:54 PM #14 Phase 120 File dlgbrnst.cpp, Line 1762 Creating the image for burning 5:53:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:53:54 PM #16 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 5:54:06 PM #17 SPTI -1128 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1128) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 00 00 00 17 A0 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 Buffer x07810040: Len x10000 5:54:06 PM #18 TRANSFER -25 File Reader.cpp, Line 270 Error reading data 5:54:06 PM #19 Text 0 File Reader.cpp, Line 273 Exception value: -1128 5:54:06 PM #20 CDCOPY -12 File DVDReader.cpp, Line 148 Unrecoverable read error at LBA 6048 5:54:06 PM #21 Phase 22 File dlgbrnst.cpp, Line 1762 Reading disc failed 5:54:06 PM #22 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:54:09 PM #23 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:54:09 PM #24 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 5:53:53 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:53:53 PM #2 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:53:53 PM #3 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xAC 10 00 00 00 00 00 00 00 01 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x04f5ea40: Len x18 5:53:53 PM #4 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xBB 00 FF FF 00 B0 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 5:53:53 PM #5 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x14 Start 0 Len 2042720 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 5:53:53 PM #6 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 2042720 = 2042720, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 5:53:53 PM #7 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 5:53:54 PM #8 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2042719 (453:56.19, 3989MB) 5:53:54 PM #9 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 5:53:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:53:54 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2042720 (2042720) = #2042720/453:56.20 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2042720 blocks [Image Recorder] -------------------------------------------------------------- 5:53:54 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4183490560, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2042720 | 2042720 | 0x00 2042720 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:53:54 PM #13 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-No, small files-No (<64KB) 5:53:54 PM #14 Phase 120 File dlgbrnst.cpp, Line 1762 Creating the image for burning 5:53:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:53:54 PM #16 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 5:54:06 PM #17 SPTI -1128 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1128) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 00 00 00 17 A0 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 Buffer x07810040: Len x10000 5:54:06 PM #18 TRANSFER -25 File Reader.cpp, Line 270 Error reading data 5:54:06 PM #19 Text 0 File Reader.cpp, Line 273 Exception value: -1128 5:54:06 PM #20 CDCOPY -12 File DVDReader.cpp, Line 148 Unrecoverable read error at LBA 6048 5:54:06 PM #21 Phase 22 File dlgbrnst.cpp, Line 1762 Reading disc failed 5:54:06 PM #22 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:54:09 PM #23 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:54:09 PM #24 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
It can not read the disc. It is not surprising if you burnt it the same way you are trying to burn the copy. The rule is to burn at half the rated speed of the blank media (good media). Update Nero http://www.filehippo.com/download_nero_7_premium/tech/?2893 You have the bare minimum memory needed for Nero. Do not run anything else while burning. You might even think about turning off some services (XP has a lot of crap running). Or add some memory. CMC media is not very good and trying to burn at 16x. Well it is not going to work well. Slow to 4x or 8x. http://www.videohelp.com/dvdmedia?dvdmediadvdridsearch=CMC MAG.M01 edit P.S. You could try to rip the disc w/Decrypter.
Okay I tried using a different software to copy the dvd and I still get the same error message. I used the software called EasyClone DVD. I attempted to update my software and I believe it was unsuccessful so, I need to check into that again. Is there anything else that I can do to copy this DVD?
if Nero is giving you problems..... check out other software and guides: http://webpages.charter.net/bacitup/Guides.htm check out the software tab at the bottom of the guides page! if you want the best Nero 7 version then: 7.10.1.0........ Save your serial # then uninstall Nero! Use the cleaning tool: Nero7 Clean tool http://www.nero.com/enu/support-nero7-tools-utilities.html do a registry clean up using this free cleaner: CCleaner: http://www.ccleaner.com/download then do a defrag and reboot! now reinstall Nero 7.10.1.0: http://www.filehippo.com/download_nero_7_premium/ Use better media!~ Taiyo Yuden or Verbatim are the best around and don't burn too fast! half the rated speed of the disk is fine! 4x or 8x! you are using too much memory ....at 512k that's the minimum of RAM! so no multi tasking, no internet, shut down all unnecessary programs running in the background, and even shut off your anti virus programs while burning! if you're having reading errors then clean the disk and see if this helps......
The problem is not the software that is reading the disc. The problem is the way that the disc was burnt or there is damage to the disc.
this sounds like it's crappy media and that's your problem! the disk that was recorded and now you can't copy it by product of crappy media and not how it was recorded...... it's either not able to read the disk and that's why I said, if you're having reading errors then clean the disk and see if this helps. but after cleaning the disk and you still have trouble trying to rip the disk to the hard drive then it's the media...... what once worked now doesn't because it's crappy media! this is a known problem when you use poor quality media! You can't re rip the DVD to the hard drive and it's hard to copy from it! You won't have this problem if you use Taiyo Yuden disks (made in Japan disks) or Verbatim!
I would say that it's a combination of a. Using poor quality discs b. Burning way too fast c. Insufficient memory (RAM)..recommended 512mb min
Sorry I forgot to mention that part again. It is most likley the biggest reason you are having trouble. Does it play well in a stand alone player.
Yes the dvd does play fine in a dvd player. I will change the type of media that I'm using to burn with also, I will slow down the speed as well. I need to upgrade to a newer Nero anyway so, I will do that as well. The original media that I have the dvd burned on is a Sony. I thank everyone for ur help I will try these things and see if this helps......once again thanks everyone.
you also might upgrade your system resources a bit .Some extra hardware wouldnt go astray if you aRE UPGRADING YOUR NERO as some programs require you to have 'x' amount of resources to run them properly
The dvd that I'm burning to or the dvd that I'm burning from. I use Sony DVD+R typically for all my burning. Just recently I purchased Maxwell DVD+R. I am still having problems with the dvd drive reading the discs.
