Copy process failed, seems to be unable to read the original disc. I copied the same disc last month using Nero 6.6. Any solution to this problem? Here is the burn log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.3 Internal Version: 7, 0, 1, 3 Recorder: <_NEC DVD+RW ND-2100AD> Version: 104E - HA 1 TA 1 - 7.0.1.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.1.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 0 ID 1 DMA: On DiskPeripheral : Maxtor 6Y120M0 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8162B D: CDRom0 _NEC DVD+RW ND-2100AD E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523244kB) Free physical memory: 237MB (242952kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.4.2006 DVD-Copy on the fly 5:05:29 PM #1 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 5:05:29 PM #2 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: DVD.) 5:06:34 PM #3 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 5:06:34 PM #4 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: DVD.) 5:06:34 PM #5 Phase 23 File dlgbrnst.cpp, Line 1725 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 6/13/2005 3:05:07 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I would NOT recommend this process, it's thwart with failures as you have found out. I would firstly Rip the DVD to hard drive and then burn or consequently if you have the Full version of Nero7, then I would use Nero Recode.
Thanks for your help. I found that a bone-headed operator (me) made a glaring blunder. I was trying to copy a cd to a dvd. Anyway, tried again cd to cd, still failed as you noted. Can you tell me how to rip my cd to the hard drive with Nero? For music ripping I have been using MusicMatch. Her is my latest error log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.3 Internal Version: 7, 0, 1, 3 Recorder: <_NEC DVD+RW ND-2100AD> Version: 104E - HA 1 TA 1 - 7.0.1.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.1.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 0 ID 1 DMA: On DiskPeripheral : Maxtor 6Y120M0 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8162B D: CDRom0 _NEC DVD+RW ND-2100AD E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523244kB) Free physical memory: 180MB (184468kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.4.2006 CD Copy 10:35:08 AM #1 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:35:08 AM #2 Text 0 File Burncd.cpp, Line 3048 _NEC DVD+RW ND-2100AD Buffer underrun protection activated 10:35:08 AM #3 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 10:35:08 AM #4 Text 0 File Reader.cpp, Line 124 Reader running 10:35:08 AM #5 Text 0 File Writer.cpp, Line 113 Writer E: _NEC DVD+RW ND-2100AD running 10:35:08 AM #6 Phase 48 File dlgbrnst.cpp, Line 1725 Analyzing disc 10:35:08 AM #7 CDCOPY -1 File CDCopy.cpp, Line 1915 The CD is copyrighted 10:35:10 AM #8 Text 0 File CDCopy.cpp, Line 2131 _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_ Track 1: 0 0 ( 0:02.00) 236738 236737 ( 52:38.37) 10:35:10 AM #9 Text 0 File CDCopy.cpp, Line 840 Copy options: copy on-the-fly: ON read ISRC/MCN: OFF use jitter correction: OFF data options ignore read error: ON write defekt blocks OFF read raw data: OFF read r-w subchannel data: OFF audio options ignore read error: ON read indexes: OFF read r-w subchannel data: OFF source disc does not look like CD Extra 01. 0 - 236738 = 236738, data (TRM_DATA_MODE2_FORM1_NOSUB, block size 2048) 10:35:10 AM #10 Text 0 File Burncd.cpp, Line 3342 Turn on Disc-At-Once, using CD-R/RW media 10:35:11 AM #11 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 236737 ( 52:38.37) 10:35:11 AM #12 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 10:35:11 AM #13 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: _NEC DVD+RW ND-2100AD 10:35:11 AM #14 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:35:11 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_FORM1_NOSUB (1 - Data (mode 2)) 2 indices, index0 (150) not provided original disc pos #0 + 236738 (236738) = #236738/52:36.38 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 236738 blocks [E: _NEC DVD+RW ND-2100AD] -------------------------------------------------------------- 10:35:11 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: _NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x20; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 553370368, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 236738 | lead-out | 1 | 0x41 | 0x00 10:35:11 AM #17 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:35:11 AM #18 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 32x (4,800 KB/s) 10:35:11 AM #19 SPTI -1189 File SCSIPassThrough.cpp, Line 323 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02 Buffer x04842c00: Len x4000 10:35:11 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:35:11 AM #21 Text 0 File MMC.cpp, Line 16934 StartDAO : CD-Text - Off 10:35:11 AM #22 Text 0 File MMC.cpp, Line 17165 CueData, Len=32 41 00 00 24 00 00 00 00 41 01 00 20 00 00 00 00 41 01 01 20 00 00 02 00 41 aa 01 24 00 34 26 26 10:35:50 AM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 323 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 02 68 00 00 1C 00 00 00 Sense Area: 0x70 00 03 00 00 02 69 0A 00 00 00 00 0C Buffer x03d30000: Len xff80 0x00 00 00 00 00 00 00 00 68 2A 42 55 53 24 56 49 0x33 21 4C 2E 71 5F 31 25 3C 38 41 2F 5C 21 62 45 0x59 23 0A 6C 48 31 65 60 53 4D 28 52 4F 39 3D 2C 10:35:50 AM #24 CDR -1135 File Writer.cpp, Line 302 Write error E: _NEC DVD+RW ND-2100AD 10:35:50 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:35:50 AM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:35:50 AM #27 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 32x (4,800 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 6/13/2005 3:05:07 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks for your suggestion, but it does not seem to work. The only option available is to burn to a disc, not rip to hard drive. Destroyed a couple of cds trying again. Always stops burning at 7% complete. At this point, I'm sorry I bought version 7. Version 6.6, until the final update, did everything I needed. All I used Nero for was to burn music cds from mp3 files and make copies of music and photo cds and dvds. Now, version 7 won't copy and I am unable to upgrade it to the latest version, 7.0.8.2. The disc I bought is 7.0.1.3. I tried uninstalling and the using the clean tool but still get error messages advising to reinstall Nero, installation corrupted, not compatible with existing installation etc. I have a Dell machine which came with Sonic DVD which I hear has compatibility problems with Nero. However, 6.6 worked ok. I removed Sonic (as much as possible) and 7 does not work.
