Sorry if this is a repeat. Searched but couldn't find the answer in past posts. (Although I'm not too skilled at posting). I tried to copy a copy of a movie. Process failed below is the log. Help... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 8/17/2005 6:41:58 PM Nero version: 6.6.0.5 (Nero Express) Recorder: <DVDRW IDE 16X> Version: A089 - HA 1 TA 0 - 6.6.0.5 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TOSHIBA DVD-ROM SD-M1502>Version: 1816 - HA 1 TA 1 - 6.6.0.5 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800JB-00JJC0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-M1502 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === DVDRW IDE 16X D: CDRom0 TOSHIBA DVD-ROM SD-M1502 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 232MB (237588kB) Memory in use : 54 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.8.2005 DVD-Copy on the fly 4:42:11 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 4:42:11 PM #2 Text 0 File Writer.cpp, Line 122 Writer DVDRW IDE 16X running 4:42:11 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2298496 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 4:42:11 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2298496 = 2298496, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 4:42:11 PM #5 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 4:42:12 PM #6 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2298345 (510:44.45, 4488MB) 4:42:12 PM #7 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 4:42:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 2310 Recorder: DVDRW IDE 16X, Media type: DVD-R Disc Manufacturer: MJC ME - Disc Application Code: 64, Disc Physical Code: 193 4:42:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:42:12 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2298496 (2298496) = #2298496/510:46.46 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2298496 blocks [DVDRW IDE 16X] -------------------------------------------------------------- 4:42:12 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4707319808, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2298496 | lead-out | 1 | 0x41 | 0x00 4:42:12 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 4:42:12 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:42:12 PM #14 Text 0 File DVDR.cpp, Line 2260 Recording mode: Sequential Recording Mode 4:42:12 PM #15 Text 0 File Mmc.cpp, Line 21060 Set BUFE: Super Link -> ON 4:42:12 PM #16 Text 0 File DVDR.cpp, Line 2401 Start write address at LBA 0 DVD high compatibility mode: Yes 4:42:12 PM #17 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 4:42:12 PM #18 Text 0 File DVDR.cpp, Line 5376 Drive: DVDRW IDE 16X Book Type request: DVD-ROM Changing the Book Type was finished successfully, return code 0 4:42:12 PM #19 CDR -1207 File DVDR.cpp, Line 4762 Book Type automatically set to: DVD-ROM 4:42:45 PM #20 Text 0 File Cdrdrv.cpp, Line 1284 16:42:45.343 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:51 PM #21 Text 0 File Cdrdrv.cpp, Line 1284 16:42:51.875 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:51 PM #22 Text 0 File Cdrdrv.cpp, Line 1284 16:42:51.968 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:52 PM #23 Text 0 File Cdrdrv.cpp, Line 1284 16:42:52.062 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:52 PM #24 Text 0 File Cdrdrv.cpp, Line 1284 16:42:52.187 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:52 PM #25 Text 0 File Cdrdrv.cpp, Line 1284 16:42:52.265 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:52 PM #26 Text 0 File Cdrdrv.cpp, Line 1284 16:42:52.359 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:52 PM #27 Text 0 File Cdrdrv.cpp, Line 1284 16:42:52.546 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:52 PM #28 Text 0 File Cdrdrv.cpp, Line 1284 16:42:52.640 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:52 PM #29 Text 0 File Cdrdrv.cpp, Line 1284 16:42:52.843 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:52 PM #30 Text 0 File Cdrdrv.cpp, Line 1284 16:42:52.937 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:53 PM #31 Text 0 File Cdrdrv.cpp, Line 1284 16:42:53.031 - DVDRW IDE 16X\H1 T0 : Queue again later 4:42:53 PM #32 Text 0 File Cdrdrv.cpp, Line 1284 16:42:53.171 - DVDRW IDE 16X\H1 T0 : Queue again later 5:29:30 PM #33 SCSI -1135 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04F20000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x12 0x18 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 5:29:30 PM #34 CDR -1135 File Writer.cpp, Line 311 Write error 5:29:30 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:29:30 PM #36 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 5:29:30 PM #37 Text 0 File DVDR.cpp, Line 2642 EndDAO: Last written address was 1185983 5:29:30 PM #38 Text 0 File DVDR.cpp, Line 5376 Drive: DVDRW IDE 16X Book Type request: DVD+RW Changing the Book Type was finished successfully, return code 0 5:29:30 PM #39 CDR -1211 File DVDR.cpp, Line 4754 Book Type set to: DVD+RW 5:29:30 PM #40 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Use DVD decrypter to rip and iso of the movie and then write the iso back to a good dvd media at 4x. SImple.
Dear ogrish, 1) If you're trying to copy and burn an entire dvd, try use Nero Recode instead. 2) Also, try lower the burning speed to 2-4x. Good luck!
@ogrish - whilst you've opened thread with a Nero log, i'll address that - - not too old, 6.6.0.16 is latest. Try Burning Rom instead of Express - these generic drives are a pain when it comes to firmware. Pls confirm for me if this is a BTC drive, or what make drive this actually is, then i can point you towards the correct firmware, if it's out of date that is - you're burning to the outer edge of discs. If you use DVD Shrink, set target size in Shrink's preferences to 4300MB, thus avoiding outer edge and not sacrificing much space - ouch! what media is that you got there. i'll wager that's a big part of your problem - for one that disc was supposed to be a -R disc (which can't be booktyped, only +R can be), for two, what's happening here ? - but DECENT media, see my sig for recommended media - most people recommend 4x for video burning Even if you use Decrypter, you still need to address the above things
