Hi I am trying to burn a Divx file to a DVD to watch in my player and I converted it using DivxToDVD and i got the VIDEO_TS folder with the files in it which is all fine and good. But when i go to burn using copy to DVD it gives me this error. "Write error at 871968(16)-Code 0629 00 [Unit attention, Power On or Bus device reset occured]" and it spits out the disc. My burner is a HP dvd300i and my discs are SONY DVD+R if that helps. Also here is my Log: 29/05/2005 4:02:27 PM info ********** Report session closed *********** 29/05/2005 4:01:16 PM info Finalizing CD.. 29/05/2005 4:01:16 PM error Write error at 871968 (16) - Code 06 29 00 [Unit attention, Power On or Bus device reset occured] 29/05/2005 3:47:44 PM info Lead-in burning time (mS) 10798 29/05/2005 3:47:33 PM info Starting write buffer 29/05/2005 3:47:33 PM info Starting to write... 29/05/2005 3:47:33 PM info Buffer under-run proof enabled 29/05/2005 3:47:33 PM info Writing speed requested x2.4, effective x2.0 29/05/2005 3:47:33 PM info Writing session #1 and closing disc. 29/05/2005 3:47:33 PM info Open Image file "C:\Documents and Settings\Family\Application Data\CopyToDvd\COPYTODVD_05292005_154732_957.cache" 29/05/2005 3:47:33 PM info Required sector size : 2066480 29/05/2005 3:47:33 PM info Available sector size : 2295104 29/05/2005 3:47:33 PM info Available write speed: x4.0, x2.4 29/05/2005 3:47:32 PM info Blank or incomplete DVD 29/05/2005 3:47:32 PM info Detected media $001B: DVD+R 29/05/2005 3:47:32 PM info Finished browsing files - Data size 3.94 Gb. 29/05/2005 3:47:32 PM info Start Browsing file structures 29/05/2005 3:47:32 PM info IDE Controler manufacturer : Silicon Integrated System 29/05/2005 3:47:32 PM info IDE Controler Description : SiS PCI IDE Controller 29/05/2005 3:47:32 PM info Location : PCI bus 0, device 2, function 5 29/05/2005 3:47:32 PM info Supported Media: DVD+R, DVD+RW, CD-R, CD-RW 29/05/2005 3:47:32 PM info Writing device used: 1:1:0 - HP DVD Writer 300n 3.20 [F] (Ide) 29/05/2005 3:47:32 PM info Using Patin-Couffin driver Version 1.28, Internal revision 28 - Async. Access mode 29/05/2005 3:47:32 PM info Using DVD Video filelist creation mode. 29/05/2005 3:47:32 PM info ParamStr 4 = "/writespeed=2.4" 29/05/2005 3:47:32 PM info ParamStr 3 = "/writedevice=F" 29/05/2005 3:47:32 PM info ParamStr 2 = "/volumename=gladiator divx dvd rip" 29/05/2005 3:47:32 PM info ParamStr 1 = "/dvdvideofl=C:\PROGRA~1\VSO\COPYTO~1\~c2c_fl.tmp" 29/05/2005 3:47:32 PM info ParamStr 0 = "C:\PROGRA~1\VSO\COPYTO~1\CopyToCd.exe" 29/05/2005 3:47:32 PM info User default language : 4105 (0x1009h) - English (Canadian) 29/05/2005 3:47:32 PM info System default language : 4105 (0x1009h) - English (Canadian) 29/05/2005 3:47:32 PM info Version 3.0.55.106 29/05/2005 3:47:32 PM info ExeName : "C:\PROGRA~1\VSO\COPYTO~1\CopyToCd.exe" 29/05/2005 3:47:32 PM info OS : Microsoft Windows XP Personal Service Pack 2 (Build 2600) Any Help would be appreciated. Thanks.
Hello, Have you written the VSO Support team? Go here http://www.vso-software.fr/supportform.php fill out first little question with "technical support" make sure to download the support tool, fill out the little form and sent it in. VSO is pretty good about responding quickly. Claire
Hi there, Found this in an other forum: Your burner has firmware v3.20 and it's the latest (I Checked HP.COM) Is your burner alone on the IDE bus or there's an other device with it on the same bus ? (An other burner, CDROM etc...) Are they both set to "Cable Select" and properly configured (One Master / One Slave)... I'm only suggesting this based on what it's quotes above, about IDE BUS resets... Is your burner set to DMA on for transfer mode: http://home.comcast.net/~bbmayo/DMA.html Were you ever succesful burning something with these media ? With different media ? Maybe it doesn't like those media ? I would try an other brand and see if it will burn !
i have no idea about this IDE bus stuff.. but i do have 2 cd rom / burner drives... also in properties it lists 3.. could this be a problem? Also, i dont know anything about cable select and master/slave My burner however is set to DMA, i checked. Yes, since writing this i have burnt 2 successful movies in a row, so i thought my problem was fixed, but the last 2 i tried failed again with same problem. Thanks for your help.
