Hello, I cannot burn CDs, even at low speeds! Could one of the Nero gurus take a look at this log and provide some insight? Thanks very much! TC Systems TC Systems 1C82-****-****-****-****-****-**** Windows XP 6.0 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32 NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 Recorder: <PHILIPS DVD+-RW SDVD8820>Version: AD15 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PHILIPS DVD+-RW SDVD8820>Version: AD15 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === === CDRom-Device-Map === PHILIPS DVD+-RW SDVD8820 Z: CDRom0 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2045MB (2094668kB) Free physical memory: 1322MB (1353908kB) Memory in use : 35 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.12.2006 CD Image 17:30:53 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 17:30:53 #2 Text 0 File Burncd.cpp, Line 3149 PHILIPS DVD+-RW SDVD8820 Buffer underrun protection activated 17:30:53 #3 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using CD-R/RW media 17:31:56 #4 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 359844 ( 79:59.69) Last address to be written: 33759 ( 7:32.09) 17:31:56 #5 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 17:31:56 #6 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: PHILIPS DVD+-RW SDVD8820; CDR code: 00 97 15 17; OSJ entry from: Ritek Co. ATIP Data: Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 17:31:56 #7 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.) 17:31:56 #8 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 33760 (33760) = #33760/7:30.10 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 33610 blocks [Z: PHILIPS DVD+-RW SDVD8820] -------------------------------------------------------------- 17:31:56 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [Z: PHILIPS DVD+-RW SDVD8820] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 69447680, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 33760 | 33460 | 0x00 0 | 1 | 1 | 0x41 | 33760 | 33610 | 0x00 33760 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 17:31:56 #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 17:31:56 #11 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 17:31:56 #12 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 17:31:56 #13 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 17:31:56 #14 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 10x (1,500 KB/s) 17:31:56 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 17:31:56 #16 Text 0 File MMC.cpp, Line 17552 StartDAO : CD-Text - Off 17:31:56 #17 Text 0 File MMC.cpp, Line 22179 Set BUFE: Buffer underrun protection -> ON 17:31:56 #18 Text 0 File MMC.cpp, Line 17780 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 07 20 0a 17:33:04 #19 Text 0 File WriterStatus.cpp, Line 113 <Z: PHILIPS DVD+-RW SDVD8820> start writing Lead-Out at LBA 33610 (834Ah), length 0 blocks 17:36:11 #20 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 17:36:11 #21 CDR -1135 File ThreadedTransferInterface.cpp, Line 1920 Write error Z: PHILIPS DVD+-RW SDVD8820 17:36:11 #22 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1920 Could not perform end of Disc-at-once 17:36:11 #23 SPTI -1169 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 17:36:12 #24 CDR -201 File WriterStatus.cpp, Line 162 Invalid write state Z: PHILIPS DVD+-RW SDVD8820 17:36:12 #25 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 17:36:12 #26 SPTI -1169 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 Buffer x07c1ecc0: Len x3c 0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00 0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 17:36:12 #27 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 10x (1,500 KB/s) 17:36:12 #28 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 17:36:12 #29 SPTI -1169 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 17:36:12 #30 SPTI -1169 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 17:36:12 #31 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 17:36:12 #32 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 2006-11-02 03:50:35 File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-08-24 21:47:00 File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 21:47:00 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
doesn't like disk...... Why are you buring a CD with Nero Vision? try Nero Burning ROM or Nero Express! and if all else fails and you still can't get it to work: you have packet writing software on your computer..... Roxio... most members agree that when Nero starts to fail it's because Roxio and Nero isn't so compatible with each other. Uninstall Roxio and try again....
I didn't use NV. I definitely used Nero Burning Rom. Started it, went into the File menu to open the ISO, etc etc. Not knowingly. I've never installed a Roxio product, ever, on any system. I've always used Nero. Hmmm...this installation is on Vista. Is there a possibility that something's up with the OS? The only way to remove Windows CD-Writing services in Vista is to disable it through policy, because the service no longer appears in the Services MMC. Is there some other way? As for interference from other programs, I have several other authoring and burning applications installed...DVDFab Platinum, DVD Decrypter, DVD Shrink and AnyDVD (none of these were running during when I captured the log). And, too, there's Microsoft's Windows DVD Maker. I also own UltraISO but doesn't it use the Nero engine for burning? .
Is your firmware the latest? I've checked with RPC forum and it's no where to be found. In addition, try another brand of media (i.e. Taiyo Yuden or Verbatim).
Damned if I know. I looked good and hard before I started this thread and I found zip. Don't know why. It's not a rare drive. It's an all-media DL DVD-writer in a Dell XPS 1210m. Gotta be tens of thousands of them out there by now. Just tried again with VB media and got no love.
Yup. Ran it, rebooted, and things still blew up. Should've mentioned that before, apologies. I'll waste another CD on it this evening and capture the log (I forgot to save it last time). If CDRALW2K.SYS shows up in the log, the only thing I can think of is that it may very well be something new with Vista. And I can only slow the burn to 10x.
Great, still getting errors. :< TC SYSTEMS TC SYSTEMS ****-****-****-****-****-****-**** Windows XP 6.0 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32 NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 Recorder: <PHILIPS DVD+-RW SDVD8820>Version: AD15 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PHILIPS DVD+-RW SDVD8820>Version: AD15 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === === CDRom-Device-Map === PHILIPS DVD+-RW SDVD8820 Z: CDRom0 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2045MB (2094668kB) Free physical memory: 1052MB (1078184kB) Memory in use : 48 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.12.2006 CD Image 04:05:16 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 04:05:17 #2 Text 0 File Burncd.cpp, Line 3149 PHILIPS DVD+-RW SDVD8820 Buffer underrun protection activated 04:05:17 #3 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using CD-R/RW media 04:05:17 #4 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 33759 ( 7:32.09) 04:05:17 #5 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 04:05:17 #6 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: PHILIPS DVD+-RW SDVD8820; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: C0 40 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 04:05:17 #7 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 04:05:17 #8 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 33760 (33760) = #33760/7:30.10 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 33610 blocks [Z: PHILIPS DVD+-RW SDVD8820] -------------------------------------------------------------- 04:05:19 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [Z: PHILIPS DVD+-RW SDVD8820] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 69447680, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 33760 | 33460 | 0x00 0 | 1 | 1 | 0x41 | 33760 | 33610 | 0x00 33760 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 04:05:19 #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 04:05:19 #11 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 04:05:19 #12 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 04:05:19 #13 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 04:05:19 #14 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 10x (1,500 KB/s) 04:05:19 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 04:05:19 #16 Text 0 File MMC.cpp, Line 17552 StartDAO : CD-Text - Off 04:05:20 #17 Text 0 File MMC.cpp, Line 22179 Set BUFE: Buffer underrun protection -> ON 04:05:20 #18 Text 0 File MMC.cpp, Line 17780 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 07 20 0a 04:06:35 #19 Text 0 File WriterStatus.cpp, Line 113 <Z: PHILIPS DVD+-RW SDVD8820> start writing Lead-Out at LBA 33610 (834Ah), length 0 blocks 04:09:16 #20 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 04:09:16 #21 CDR -1135 File ThreadedTransferInterface.cpp, Line 1920 Write error Z: PHILIPS DVD+-RW SDVD8820 04:09:16 #22 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1920 Could not perform end of Disc-at-once 04:09:16 #23 SPTI -1169 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 04:09:16 #24 CDR -201 File WriterStatus.cpp, Line 162 Invalid write state Z: PHILIPS DVD+-RW SDVD8820 04:09:16 #25 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 04:09:16 #26 SPTI -1169 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 Buffer x048c1e40: Len x3c 0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00 0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04:09:17 #27 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 10x (1,500 KB/s) 04:09:17 #28 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 04:09:17 #29 SPTI -1169 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 04:09:17 #30 SPTI -1169 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 04:09:17 #31 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 04:09:17 #32 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 2006-11-02 03:50:35 File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 21:47:00 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
your packet writing program is gone (Roxio or whatever)... but you're still burning crappy media.... CMC Mags is not good media! sorry...... try burning higher than 10x on your CD media... sometimes burning too slowly is just as bad as burning too fast. And what are you doing? are you copying a CD or something? you are still getting: Notice the Invalid, Invalid, Invalid and NOT relocatable, NO disc pos, NO patch info which gets you a write error and an invalid write state. better media might correct this ..... what are you trying to burn to CD?
Heh, yeah, I guess I should try to burn more than one particular ISO, eh? Damn, that's pretty simple. I'll give it a go. All of these attempts have been with a copy of Hiren's BootCD v8.6 which I pulled from the Usenet. There was no corruption evident in the downloaded archives, but that doesn't mean that corruption didn't exist before the poster packaged it. Back to you in a bit.
Your burner doesn't like the media you're using, try other high quality CD-R (i.e. Taiyo Yuden, Sony or Maxell). NOTE: below is a successfully burned log of mine, compare yours to mine and see if you'll notice any differences.
Tried another ISO...a Dell diagnostics disc image...it burned perfectly. Same media, same computer, same everything. Tried the Hiren's ISO in another computer. Blew up, same as before. Tried burning the Hiren's at DAO/96 and it appears to have worked wonderfully. YAY! ...but why is that?
----------------------------- Hy, please can you tell me what is Hiren's at DAO/96 ? is it a software ?
Hiren's = a boot CD with a collection of utility software. Very useful in a pinch. DAO/96 - disk at once, 96.
I thought I would throw this out there. I've tried a bunch of stuff but I'm not getting anywhere. I think this firmware is up to date. Everything use to work and then I updated nero which messed things up, so I cleaned and reinstalled on my desktop and laptop. Desktop works fine now and laptop doesn't. Any help would be great, my eyes are burning!!! I had a different disc in the drive when I tried to burn but it does the same all the time. Thanks in advance! Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.N0 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23FB-60 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047992kB) Free physical memory: 699MB (716360kB) Memory in use : 31 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.1.2007 NeroAPI 10:28:55 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 10:28:55 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 10:28:55 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 10:28:55 PM #4 Text 0 File DVDR.cpp, Line 6573 Book Type counter: 500, Book Type selected in EEPROM, command version 2 10:28:55 PM #5 Text 0 File DVDR.cpp, Line 6573 Book Type counter: 500, Book Type selected in EEPROM, command version 2 10:28:55 PM #6 Text 0 File Reader.cpp, Line 127 Reader running 10:28:55 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:28:56 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:28:56 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:28:57 PM #10 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:30:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2204015 (489:46.65, 4304MB) 10:30:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 10:30:00 PM #13 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R Disc Manufacturer: Prodis - cF02 Disc Application Code: 64, Disc Physical Code: 193 10:30:00 PM #14 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Compilation cannot be written on that medium type. (Medium in drive: CD-RW. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 10:30:00 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2204016 (2204016) = #2204016/489:46.66 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2204016 blocks [_NEC DVD+-RW ND-6500A] -------------------------------------------------------------- 10:30:00 PM #16 Text 0 File Burncd.cpp, Line 3828 Can only write at 2.4x (3,324 KB/s) instead of 4x (5,540 KB/s) to current disc. 10:30:00 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4513824768, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2204016 | lead-out | 1 | 0x41 | 0x00 10:30:00 PM #18 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 10:30:00 PM #19 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 10:30:00 PM #20 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 10:30:00 PM #21 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 10:30:00 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:30:00 PM #23 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 10:30:00 PM #24 Text 0 File Mmc.cpp, Line 21774 Set BUFE: JustLink -> ON 10:30:00 PM #25 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 10:30:00 PM #26 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:30:00 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0xA1 0x70 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 10:30:00 PM #28 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778 Illegal disc 10:30:00 PM #29 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778 Could not perform start of Disc-at-once 10:30:00 PM #30 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) 10:30:00 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:30:00 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. 10:30:04 PM #33 Text 0 File DVDR.cpp, Line 6573 Book Type counter: 500, Book Type selected in EEPROM, command version 2 10:30:05 PM #34 Text 0 File DVDR.cpp, Line 6573 Book Type counter: 500, Book Type selected in EEPROM, command version 2 Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
