d box kein system on screen

hi looking for help here i have a d box and it wont load up

 

Was it working or did you flash it yourself recently?

 

yes it was flashed and when i got it back thats all it reads on the screen

 

i have tried d box ifa but it cant find the box do you think it may have been the wrong flash used if so what do i do .

 

Sounds like whoever flashed it has put the wrong type of image on the box. meaning a 1X image on a 2X box or 2X image on a 1X box.

I would suggest you take it back to the person who did it for you and tell them to put a correct image(1X or 2X) on it and it will work fine.

 

it was working till it got flashed thanks

 

how can he do that if it wont go past kein system i have not got a clue here thanks.

 

He/she will need to flash a new image to get the box out of kein system. I had to do this last week as I flashed a 2x image to my box instead of the 1x image I thought I'd selected.

 

That will be his problem!!, not a major issue, he will be able to flash a correct image onto it, but he must have known that the wrong one was on it when he gave it back to you, (hope you did not pay him to do it!!)

 

thanks but i still have to get it past kein system i cant put new image on till i get past this point as i said the pc cant find the d box so i can flash the image thanks.

 

yes i did pay him and now i am on here begging for help and you guys are helping me now i should have come here to start with ask for info and do it myself now i have to so all the help will wecomed thanks

 

hi and thanks again but i still need to know how to get past kein system the box only displays this and my pc cant find the box to do anything .

 

Whoever flashed your box will have used a crossover/null modem cable, that's how the pc 'talks' to the box. He/she will need to go through the same process as they did last time, except that they should use the correct image. I did mine by using FTA, cable and a correct image - that's it!

 

thanks the ifa application cant find the box with crossover/null modem cable if it cant find it i cant fix it so what do 9i do now . thanks

 

Apologies, I meant IFA not FTA (I'm confusing myself now).

I had to start the IFA prog a dozen times or so before the green bar appeared (not sure why?). I also tried unplugging the box (with the crossover cable attached) from the mains and it eventually started.

 

thanks i know what you ment i was just sitting here trying everthing you said and up she came thank god and you to for all your help just the job now i say i sorted it myself ha ha thanks again.

 

hi can anyone help me out my dbox says kein system pls help

 

when i try to put new im on it gets to this part and says while trying to open/tmp/flashimgs;no such file or direotory help

 

As said above use IFA and flash it with a new image. Most new images are FTA only so you need to add a CAM/EMU and new ROM/ROMs.

You will find all you need in Eamos at the bottom of my post.

 

thankyou so much i got it up and working but channels all over the place