Hi Guys I have a D Digital which went down on Thursday, but don't know what firmware or what type it is any idea how to find out?
new firmware wont let u view nagravision keep old firmware ive tried it had to reinstall old firmware and put keys in dream wen u acess nagravision same keys as starview
Right it seems a lot of people here are newbies like myself and do not know where to start so I thought I would post this to help. OK step 1. Make sure you have 1 RS232 Cable (If you DON'T have a RS232 port a USB to RS323 adapter) 2 The Envision.exe Loader 3 The FIXED DD 281106.bin Step 2 Start the loader In the SAT section!!!! Step 3 Select > Loader > Code > Code Send Step 4 Load the FIXED DD281106.bin Step 5 Select you com port i.e com 3 Step 6 IMPORTANT!!!! Make sure you Ddigital Box is OFF AT THE BACK SWITCH!!!!!! Step 7 Connect your RS323 cable to your box and PC Step 8 Hit the SEND BUTTON and immediately switch on the box from the BACK switch Step 9 You should see the box start to flash with the letter "d" on the LCD pannel and wait for the progress bar to finish Step 10 Your box is done. You may need to rescan for channels, but I did not the new EMU NUMBER IS 8888 NOT!!! 2580!! I came across this post hope it helps
Hello guys - I have the same issue as Cyber 20 however my box is a D Digital PLUS (if there is a major difference??) which went down a couple of days ago I think it was Saturday. Anyway went to the Link that DesB kindly put up and got the necessary bits from the Eamos FTA Library, however doing all the necessary bits still find that my box is still saying 'scrambled or bad channel' I'm also getting a very poor signal, its coming up at about 3 and its from 1-100. PLEASE HELP - thanks. Does any1 have the latest FIRMWARE by anychance? Does any1 else have the same issue? PS - I also have a Digivox box and that also didn't work after flashing it - Help Help Help, please!!!
