digivox problem help

i have reflashed my digivox , its two years+ old silver, im in dublin , on ntl , the firmware file i used is v4300 bin / it was stuck on (chld) but i got it back to normal menu, i have the emu turned on , and the cable provider (named ) in the scann box " so there ok" when i turn it on it tells me ( data updateing 0%) and never changes, from O% , i have it set on sky sport for the change , but , no luck , any body got any ideas , thanks for your time and help .. mick,,,,,,,

 

Mick How did you get the box back to normal mine is stuck oc (CHdL) Tony

 

CHdL er is bad flash er im sure mite be wrong try reflash

 

when u flashed with that file v4300 did u factory reset first?,if not factory reset now 0000 to delete,power off at back,autoscan ur provider,emu to on and press the set default key and exit out,now watch,remove splitters.

 

chdl is bad flash what box and firmware??

 

tried a reflash but still is stuck on (CHdL) is there a way to reset the box tony

 

Its a Digivox-T I flashed digivox_ter_v3300 and digivox_z20081222_v4300_api can I reset the box Tony

 

yes u can fix by reflashing with correct file.
load the loader with v3300 which is the correct file for terrestial
have box powered off,press download and power up box together to force flash to take,might work 1st or 10th time,just keep trying.

v4300 is for a dvb/c box as u have a dvb/t box it needs different firmware.

 

CACTIKID " is it ok for me to use v4300 bin file , for dublin ,its a old silver digivox 2 to 3 years , should i still do a factory setting before i reflash it , with the v4300 ? thanks again , mick

 

yes v4300 for silver digivox only,yes factory reset first.

 

Thanks Cactikit I;ve reset and installed the digivox_ter_v3300 again but still no stations. I tried to install the v4300 for this box but kicks me out I;ll have to come back to this tomorrow herself wants to look at the Thorn Birds. Thanks for your help Finmccool appologies for the thread takover

 

digivox t has only one firmware to use v3300 for use on c****s mmds only,that box is a dvb/t.
silver digivox 2007 is a different box it is a dvb/c for use on n*l
and that box uses v4300.
u have to use the files for ur box they are not swappable,that is why u need to correctly identify box and provider if not=brick

 

Looks like I have the wrong box for my area I have the Digivox-T mmds and I'm in the cabled D*b area should I get a different type box

 

this is where i get lost ur post earlier says u have this box in dublin on n*l if that is the case u have ordinary digivox silver ,check name on front of unit it says digivox? =dvb/c then v4300 is what u need.i presume,if not
if it has digivox t on front it will only work on c****s mmds with aerial on roof,only firmware is v3300 it is a dvb/t box.
n*l also has mmds but they use a dvb/c

 

thanks for your answer , i tryed to down load that file v4300 , but when i get to the web page were it is , at 4shared .com , and click on the file , it takes me to a web page , were it has lots of sites , for file ext" and i cant find it there , so im stuck there , thanks again ,

 

Thanks for confirming this cactikit I have the Digivox-T which is the wrong box for the Dublin area I'll have to order the correct box. Could you advise me on the best box to order.

 

there is a new digivox xl usb just out reports say excellent picture quality.skywonder uk.

 

Cactikid thanks a million just need to pass on this box to a good home Cheers T