Digivox T Help Splitting

Discussion in 'Digital TV - UK & Europe' started by kerker11, Mar 9, 2010.

  1. kerker11

    kerker11 Member

    Joined:
    Mar 9, 2010
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hi GUYs, you seem to know a bit about the Digivox T with MMds, my question is I have a Digibox T downstairs tru the chorus MMDS, I bought a second Digibox T for upstairs, but I cannot Split the signal to the second box, I bought a new splitter but this does not work! Is it possible to split the 1 signal for 2 boxes. cheers
     
  2. pudzyryan

    pudzyryan Regular member

    Joined:
    Sep 13, 2008
    Messages:
    293
    Likes Received:
    0
    Trophy Points:
    26
    ya, split the cable in attic, use 2 way splitter. one power supply will do the 2 boxes,
     
  3. phil43

    phil43 Regular member

    Joined:
    Aug 6, 2007
    Messages:
    141
    Likes Received:
    0
    Trophy Points:
    26
    There are a couple of ways to split.
    1.You can go connect directly from your first box using rf out connection found under your antenna connection.
    2.You can put an ordinary splitter after your power pack to power
    2 boxes.
    3.You can put a powered splitter before your power pack.This is
    one that has power on one side going back to your downconverter
    You will see on front of splitter power in and power out.This side
    goes from power pack to downconverter other side to new box.
     
  4. kerker11

    kerker11 Member

    Joined:
    Mar 9, 2010
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Cheers for the reply

    Tried to split in the attic, did not work second box says no signal being recieved, do i need to move the power (down converter) that down stairs into the attic and put it before the splitter to the 2 rooms????

     
  5. jackoooh

    jackoooh Regular member

    Joined:
    Feb 13, 2009
    Messages:
    425
    Likes Received:
    0
    Trophy Points:
    26
    kerker have you checked that the emu key is on :go to system information then press ok then type 1004 a page appears turn key emu on then exit exit go to sky sports channel and wait for update to complete should only take a minute or two i have 3 of them split with one power supply no probs
     

Share This Page