I get this error when trying to burn A Mini DVD-R (Ridata RG04), I decided to burn this mini DVD with nero express and nero burning rom choosing the Iso Image directly, it burns ok at 1x until its writing the lead out, after waiting 20 seconds to writing to the lead out the drive goes to a higher speeds(I can hear it) and I get this error, plus my mini DVD does not supports those speeds and the dye gets melted in the process. Here is the log: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 p.m. ahead WinASPI: File 'C:\Archivos de programa\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 05:33:44 p.m. Versión de Nero: 6.3.1.19 Grabador: <SONY DVD RW DRU-710A> Versión: BYX4 - HA 1 TA 0 - 6.3.1.19 Controlador de adaptador:<atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <DVD-16X DVD-ROM BDV316C >Versión: .20H - HA 1 TA 1 - 6.3.1.19 Controlador de adaptador:<atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 1 DMA: On CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On CdRomPeripheral : DVD-16X DVD-ROM BDV316C atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SONY DVD RW DRU-710A D: CDRom0 DVD-16X DVD-ROM BDV316C E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 383MB (392624kB) Free physical memory: 121MB (124704kB) Memory in use : 68 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.6.2005 Grabar imagen de DVD 11:07:23 p.m. #1 Text 0 File Reader.cpp, Line 118 Reader running 11:07:23 p.m. #2 Text 0 File Writer.cpp, Line 124 Writer SONY DVD RW DRU-710A running 11:07:23 p.m. #3 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 11:07:23 p.m. #4 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 714543 (158:47.18, 1395MB) Last address to be written: 713029 (158:27.04, 1392MB) 11:07:23 p.m. #5 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 11:07:23 p.m. #6 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: SONY DVD RW DRU-710A, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 225 11:07:23 p.m. #7 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:07:23 p.m. #8 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Modo 1) 2 indices, index0 (150) not provided original disc pos #0 + 713030 (713030) = #713030/158:27.5 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 713030 blocks [SONY DVD RW DRU-710A ] -------------------------------------------------------------- 11:07:23 p.m. #9 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1460285440, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 713030 | lead-out | 1 | 0x00 | 0x41 11:07:23 p.m. #10 Phase 24 File dlgbrnst.cpp, Line 1865 Inicio del caché de archivos 11:07:23 p.m. #11 Text 0 File Burncd.cpp, Line 4183 Cache writing successful. 11:07:23 p.m. #12 Phase 25 File dlgbrnst.cpp, Line 1865 Caché de archivos terminado 11:07:23 p.m. #13 Phase 36 File dlgbrnst.cpp, Line 1865 Inicio del proceso de grabación a 1x (1.385 KB/s) 11:07:23 p.m. #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:07:23 p.m. #15 Text 0 File dlgbrnst.cpp, Line 1723 Set remaining time: 18:34,496 (1114496ms) -> OK 11:07:23 p.m. #16 Text 0 File DVDR.cpp, Line 1932 Recording mode: Sequential Recording Mode 11:07:23 p.m. #17 Text 0 File Mmc.cpp, Line 20464 Set BUFE: Power-Burn -> ON , Generic write control : ON 11:07:23 p.m. #18 Text 0 File DVDR.cpp, Line 2073 Start write address at LBA 0 DVD high compatibility mode: Yes 11:07:23 p.m. #19 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 80 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:08:03 p.m. #20 Text 0 File Cdrdrv.cpp, Line 1294 23:08:03.812 - SONY DVD RW DRU-710A\H1 T0 : Queue again later 11:08:43 p.m. #21 Text 0 File Cdrdrv.cpp, Line 1294 23:08:43.812 - SONY DVD RW DRU-710A\H1 T0 : Queue again later 11:27:29 p.m. #22 Text 0 File WriterStatus.cpp, Line 115 <SONY DVD RW DRU-710A > start writing Lead-Out at LBA 713030 (AE146h), lenght 0 blocks 11:27:29 p.m. #23 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 11:27:30 p.m. #24 Text 0 File DVDR.cpp, Line 2315 EndDAO: Last written address was 713039 11:28:51 p.m. #25 SCSI -1176 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x02 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x02 11:28:51 p.m. #26 Text 0 File dlgbrnst.cpp, Line 1723 Set remaining time: 0:00,000 (0ms) -> OK 11:28:51 p.m. #27 CDR -1176 File ThreadedTransferInterface.cpp, Line 1708 Error de fijación de la sesión 11:28:51 p.m. #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708 No se ha podido realizar la finalización de Disc At Once. 11:28:51 p.m. #29 Text 0 File DVDR.cpp, Line 2315 EndDAO: Last written address was -1 11:28:51 p.m. #30 Text 0 File dlgbrnst.cpp, Line 1723 Set remaining time: 0:00,000 (0ms) -> OK 11:28:51 p.m. #31 Text 0 File dlgbrnst.cpp, Line 1723 Set remaining time: 0:00,000 (0ms) -> OK 11:28:51 p.m. #32 Phase 38 File dlgbrnst.cpp, Line 1865 El proceso de grabación ha fallado a 1x (1.385 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 p.m. File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 03/08/2004 03:59:44 p.m. (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You have the Sony 710A? You need to put the most recent firmware update on it, I had a 710U (same as 710A) updated the firmware and it work great ever since. visit sony's website.
Thank you for your recomendation but I already have the lastest firmware, could it be that the Sony Dru-710A cant support Mini DVD'S?? Ill try updating nero or using another software, but any other recomendation can be helpfull.
Yeah get the most up to date Nero, I use DVD minis (the optodiscs that no one can use) I have no problems.
Actually that Is what I did, although I havent got the Mini DVD's to burn yet, I also updated alcohol because it did not recognize the Mini DVD's Ill tell u how I do PS: the disk is detected as a normal DVD-R and says "used space:0 bytes free space: zero bytes"
Has this 0 bytes used, 0 bytes left, could be a sign that the drive is having trouble reading the media!?! Plz help
